Monthly Archives: December 2018

AIR COMPRESSOR

EVENT

02 – 04 Januari 2019 | Rp 6.500.000/ peserta di Bandung
06 – 08 Februari 2019 | Rp 6.500.000/ peserta di Bandung
04 – 06 Maret 2019 | Rp 6.500.000/ peserta di Bandung
01 – 03 April 2019 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

AIR COMPRESSOR TRAINING INTRODUCTION

Air compressor  usually is used  to control instrument system in operation, this equipment could be critical if the process to control hazard, this course will explain how to operate air compressor include control of maintenance.

 

AIR COMPRESSOR TRAINING OUTLINE

  1. Air and gas behavior
  2. Basic screw compressor operation
  3. Screw compressor  design and construction
  4. Inlet filter
  5. Dryr
  6. Air filter
  7. Pressure flow controller
  8. After cooler and lubricant cooler
  9. Lubrication system
  10. Compressor control

 

WHO SHOULD ATTEND THIS TRAINING?

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

 

AIR COMPRESSOR TRAINING INSTRUCTOR

Ir. Deddy Nugraha is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

 

AIR COMPRESSOR TRAINING VENUE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

AIR COMPRESSOR TRAINING DURATION

3 days

 

JADWAL TRAINING 2019

  1. 02 Jan 2019-04 Jan 2019
  2. 06 Feb 2019-08 Feb 2019
  3. 04 Mar 2019-06 Mar 2019
  4. 01 Apr 2019-03 Apr 2019
  5. 27 Mei 2019-29 Mei 2019
  6. 17 Jun 2019-19 Jun 2019
  7. 08 Jul 2019-10 Jul 2019
  8. 05 Agust 2019-07 Agust 2019
  9. 02 Sep 2019-04 Sep 2019
  10. 07 Okt 2019-09 Okt 2019
  11. 04 Nop 2019-06 Nop 2019
  12. 09 Des 2019-11 Des 2019

 

INVESTATION PRICE/ PERSON AIR COMPRESSOR

  1. Rp 500.000/person (full fare) or
  2. Rp 250.000/person (early bird, payment 1 week before training) or
  3. Rp 950.000/person (if there are 3 or more participants from the same company)
  4. Rp 5.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS AIR COMPRESSOR

  1. Training Module
  2. Flash Disk contains air compressor training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

RECOMMENDATION TO PARTICIPANTS

Participants are recommended to bring laptop for practice sessions

AIR COMPRESSOR

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

LIFTING INSPECTOR – Confirmed

Inspektur pengangkatan
Lifting

Acara

15 – 17 Januari 2019 | Rp 6.800.000,- di Yogyakarta – CONFIRMED
26 – 28 Februari 2019 | Rp 6.800.000,- di Yogyakarta
19 – 21 Maret 2019 | Rp 6.800.000,- di Yogyakarta

Jadwal Training 2019 Selanjutnya …

 

 

LIFTING INSPECTOR TRAINING OVERVIEW

This course is designed to provide personnel with the knowledge to undertake lifting operations. This course is intended for: riggers, construction, maintenance and mechanical technicians/supervisors and crane operators.

 

LIFTING INSPECTOR TRAINING OBJECTIVES

To ensure all personnel involved in rigging and slinging operations e.g. riggers, maintenance personnel/supervisors, etc. have an understanding of the legal requirements pertaining to rigging operations, the requirements for pre-use inspection and discard criteria of lifting equipment, the safe working procedures to ensure delegates can use lifting equipment safely and not exceed the load limit imposed on them

 

LIFTING INSPECTOR TRAINING CONTENTS

  1. Introduction of LOLER, PUWER and HASWA legislation
  2. Introduction of Lifting accessories and all commonly used equipment associated with rigging operations
  3. Inspection and correct use trifors, chain blocks, pull lifts, beam clamps, wire rope inspection
  4. Basic Rigger and Signal person
  5. Rigging Gear Inspection
  6. Intermedite Rigging
  7. Advanced Rigging
  8. Critical Lift Planning
  9. Examination of Rigging Equipment
  10. Utilising Recommend Rigging methods to move various items
  11. Complete Lifting Plans

 

WHO SHOULD ATTEND

This course is intended for: riggers, construction, maintenance and mechanical technicians/supervisors and crane operators.

 

LIFTING INSPECTOR TRAINING METHODS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

LIFTING INSPECTOR TRAINING INSTRUCTOR

  • Sigit Budi Hartono, ST., MT.
  • Teguh Pudji Purwanto, MT.

(Expert in mechanical dan electrical engineering)

 

JADWAL TRAINING 2019

  • Batch 1: 15 – 17 Januari 2019
  • Batch 2: 26 – 28 Februari 2019
  • Batch 3: 19 – 21 Maret 2019
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta Ibis Styles Hotel Yogyakarta
Surabaya: Hotel Santika Pandegiling Surabaya
Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang
Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel
Bandung: Golden Flower Hotel Bandung ; Serela Merdeka Hotel Bandung
Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

 

LIFTING INSPECTOR TRAINING FEE

Yogyakarta:

  • Publish Rate              : Rp 6.800.000,- /participant
  • Special Rate       : Rp 6.000.000,- /participant (min 4 participants from the same company)

Bandung / Jakarta / Surabaya / MalangRp 7.000.000,- /participant

Bali: Rp 8.000.000,- /participant

 

LIFTING INSPECTOR TRAINING FACILITIES

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Sertifikat
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Pajak (Ppn 10 %)

 

LIFTING INSPECTOR

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

AEROENGINE BEARING INSPECTION AND TECHNOLOGY

EVENT

02 – 04 Januari 2019 | Rp 6.500.000/ peserta di Bandung
06 – 08 Februari 2019 | Rp 6.500.000/ peserta di Bandung
25 – 27 Maret 2019 | Rp 6.500.000/ peserta di Bandung
22 – 24 April 2019 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

TRAINING OBJEKTIF AEROENGINE BEARING INSPECTION AND TECHNOLOGY

To equip participants with the knowledge to identify and recognize characteristics that render bearings unserviceable and/or unacceptable upon engine operation. Participant will learn the basics of failure analysis identification and the probablecauses of failures. Participant will also be informed of the cleanliness requirements for the oil lubrication system and will be taught proper handling and installation techniques, methods, and practices to minimize the opportunity for premature bearing failures.

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING OUTLINE 

  1. Levelinspection for serviceability:
    • Demagnetization and cleaning
    • Visual inspection
    • Dimensional inspection
    • Minor repair–blending/stoningof high material
    • Marking
    • Lubrication, preservation and packaging
    • Disassembly and cleaning forinspection
    • Types of bearing damage and failuremodes may include:
      • Wear
      • Indentation
      • Smearing
      • Surface distress
      • Corrosion
      • Electrical current
      • Flaking
      • Cracks
      • Cage damage
    • Classroom participation in analysis
  2. Lubrication system cleanliness:
    • Purpose of lubrication in bearings
    • Bearing preservation
    • Types of oils recommended for aero engine, gearbox, and other application aero engines
    • Lubrication checks – methods and frequencies
    • Flushing of oil system to remove debris
  3. Bearing installation:
    • The importance of cleanliness
    • Mounting and installation of bearings including methods
    • Inspecting and correcting fits and clearances
  4. Workshop / Case Studies

 

OUTCOMES FOR PARTICIPANTS

  1. Participants will understand the importance of bearing lubrication and installation in achieving calculated bearing life
  2. Participants will become confident in performing level I inspection and bearing serviceability
  3. Participants will be equipped with tools to assist them in resolving complex problems and in thinking laterally to fullyexplore possible causes of a problem

 

WHO SHOULD ATTEND AEROENGINE BEARING INSPECTION AND TECHNOLOGY

Bearing room inspectors, bearing removal and installation personnel, and engineering staff responsible for engine reliability of commercial aircraft or other aero engine and gearbox equipment. Rotating equipment Engineers, reliability engineers, mechanics, and maintenance supervisors. Anyone interested in rotating equipment performance.

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING INSTRUCTOR

Deddy Nugraha, Ir. and Team

He is a dedicated experienced fulltime trainer and technical consultant since 2002. He holds a B.S. degree in Mechanical Engineering from ITB, Bandung. He has worked nationally in a wide variety of industries including: technology, aerospace, utilities, auditing, mining and institutions thus engaged as a corporate consultant. He also holds certifications for those particular fields from Snecma, France; Engine Support Inc., USA; Danobat, Spain; DNV, Singapore; MTU, Germany and FAA Auditor, USA. Mr. Nugraha is a member of Indonesian Society for Reliability and was elected as General Sectretay for 2004-2007 period. He has trained hundreds of managers, engineers and floor associates, subjects taught to include; CMMS, RCM, TPM, Project Management, Quality Process Control, Corrosion Control and Protection, Failure Analysis, Engineering Design, Instalation & Constrcution, Inventory Control and Management. Major clients include: Pertamina, British Petroleum, Petrochina, Siemen Power, PT. Indonesia Power, PT. Krakatau Steel, Freeport Indonesia, PT. Surveyor Indonesia, Chevron, Medco Energy, PT. Aneka Tambang, Garuda Maintenance Facility, PT. Perusahaan Gas Negara, PT. Semen Padang, PT. Semen Gresik, PT. Indah Kiat Pulp & Paper, PT. Tjiwi Kimia, PT. Pupuk Kujang and PT. Kaltim Prima Coal.

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING VENUE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING DURATION

3 days

 

JADWAL TRAINING 2019

  1. 02 Jan 2019-04 Jan 2019
  2. 06 Feb 2019-08 Feb 2019
  3. 25 Mar 2019-27 Mar 2019
  4. 22 Apr 2019-24 Apr 2019
  5. 27 Mei 2019-29 Mei 2019
  6. 24 Jun 2019-26 Jun 2019
  7. 01 Jul 2019-03 Jul 2019
  8. 26 Agust 2019-28 Agust 2019
  9. 23 Sep 2019-25 Sep 2019
  10. 30 Sep 2019-02 Okt 2019
  11. 25 Nop 2019-27 Nop 2019
  12. 02 Des 2019-04 Des 2019

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING INVESTMENT

  1. Rp 6.500.000/person (full fare) or
  2. Rp 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp 5.950.000/person (if there are 3 or more participants from the same company)

 

AEROENGINE BEARING INSPECTION AND TECHNOLOGY TRAINING FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Ransel
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

AEROENGINE BEARING INSPECTION AND TECHNOLOGY

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

TOTAL COST OF OWNERSHIP ANALYSIS

ACARA

30 Januari – 01 Februari 2019 | Rp 6.500.000/ peserta di Bandung
06 – 08 Februari 2019 | Rp 6.500.000/ peserta di Bandung
04 – 06 Maret 2019 | Rp 6.500.000/ peserta di Bandung
24 – 26 April 2019 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

LATAR BELAKANG TRAINING TOTAL COST OF OWNERSHIP ANALYSIS

Besarnya tingkat kesulitan dalam membuat estimasi dan penentuan anggaran di suatu departemen disebabkan oleh minimnya pengetahuan dan penguasaan konsep estimasi, metode penetapan anggaran, tata kelola dan metode pemantauan anggaran yang benar di dalam department. Jika hal demikian tersebut diabaikan, maka anggaran yang sudah dibelanjakan, terutama dalam pemanfaatan teknologi, akan menjadi sulit dikendalikan dan menghasilkan suatu laporan pertanggunganjawaban penggunaan anggaran dana yang sulit dipastikan kebenarannya.

 

TOTAL COST OF OWNERSHIP ANALYSIS TRAINING OUTLINE

  1. Review konsep manajemen kegiatan dan keuangan.
  2. Konsep penganggaran dan tujuan penganggaran.
  3. Adakah perbedaan praktik penganggaran lembaga pemerintah dan non-pemerintah?
  4. Elemen-elemen anggaran yang baik dan proses-proses penganggaran.
  5. Tata kelola Tools Key Performance Indicator.
  6. Metode estimasi anggaran (Total Cost of Ownership Analysis).
  7. Computer based estimation

 

WHO SHOULD ATTEND TOTAL COST OF OWNERSHIP ANALYSIS TRAINING?

Supervisor, Kepala Bagian, Manajer, Senior Manajer, Direktur

 

TOTAL COST OF OWNERSHIP ANALYSIS TRAINING INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

TOTAL COST OF OWNERSHIP ANALYSIS TRAINING VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

3 hari

 

JADWAL TRAINING 2019

  1. 30 Jan 2019-01 Feb 2019
  2. 06 Feb 2019-08 Feb 2019
  3. 04 Mar 2019-06 Mar 2019
  4. 24 Apr 2019-26 Apr 2019
  5. 08 Mei 2019-10 Mei 2019
  6. 17 Jun 2019-19 Jun 2019
  7. 31 Jul 2019-02 Agust 2019
  8. 05 Agust 2019-07 Agust 2019
  9. 02 Sep 2019-04 Sep 2019
  10. 30 Okt 2019-01 Nop 2019
  11. 04 Nop 2019-06 Nop 2019
  12. 04 Des 2019-06 Des 2019

 

INVESTATION PRICE/PERSON

  1. Rp. 6.500.000/person (full fare) or
  2. Rp. 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

TOTAL COST OF OWNERSHIP ANALYSIS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

HPS: TEKNIK HARGA PERHITUNGAN SENDIRI

ACARA

21 – 23 Januari 2019 | Rp 6.500.000/ peserta di Bandung
27 – 29 Februari 2019 | Rp 6.500.000/ peserta di Bandung
25 – 27 Maret 2019 | Rp 6.500.000/ peserta di Bandung
10 – 12 April 2019 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

PENGANTAR TRAINING HPS: TEKNIK HARGA PERHITUNGAN SENDIRI

Owners Estimate (OE) atau Harga Perkiraan Sendiri (HPS) merupakan faktor yang sangat penting bagi keberhasilan kegiatan pengadaan barang dan atau jasa di setiap organisasi, baik swasta maupun pemerintah.Kesalahan dalam penentuan OE/HPS bisa berakibat fatal dalam bentuk kegagalan proses pengadaan karena nilai OE/HPS terlalu rendah sehingga tidak ada mitra yang bersedia melaksanakan pekerjaan. Kegagalan bisa berbentuk OE/HPS yang terlalu tinggi sehingga pengadaan barang dan atau jasa dinilai terlalu mahal (over price).Seminar ini akan membahas secara terinci dan mendalam tentang semua aspek perhitungan OE/HPS dengan mengunakan pendekatan statistikal dan akunting termasuk konsep Activity-Based Budgeting(ABB) dan konsep Net Present Value (NPV). Selain itu, dibahas pula pendekatan yang komprehensif dalam pengadaan barang dan jasa. Penyajian materi dilakukan dengan mudah sehingga bisa diterima oleh semua peserta walaupun memiliki latar belakang keahlian dan pendidikan yang beragam.

MATERI TRAINING HPS TEKNIK HARGA PERHITUNGAN SENDIRI

  1. Proses Pengadaan Barang dan Jasa.
  2. Pengertian Owners Estimate (OE)/Harga Perkiraan Sendiri (HPS).
  3. Peran Owners Estimate dalam Proses Pengadaan Barang dan Jasa.
  4. Teknik penyusunan Owners Estimate.
  5. Statistik Bisnis untuk penyusunan Owners Estimate.
  6. Perhitungan Harga Satuan dan Cost of Goods Sold.
  7. Perhitungan Harga Satuan dan Cost of Goods Sold dengan Activity Based-Costing (ABC).
  8. Analisis Titik Pulang Pokok (Break Even Point Analysis).
  9. Advanced approach dalam Harga Perkiraan Sendiri.
  10. Studi Kasus dengan menggunakan Software.

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING HPS INI?:

Manajer dan staf yang terlibat langsung dalam kegiatan pengadaan ataupun manajer dan staf dari bagian-bagian lain yang berperan sebagai pengguna dalam pengadaan barang dan jasa.

 

HPS : TEKNIK HARGA PERHITUNGAN SENDIRI TRAINING INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau pernah terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

VENUE 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

3 hari

 

JADWAL TRAINING 2019

  1. 21 Jan 2019-23 Jan 2019
  2. 27 Feb 2019-01 Mar 2019
  3. 25 Mar 2019-27 Mar 2019
  4. 10 Apr 2019-12 Apr 2019
  5. 27 Mei 2019-29 Mei 2019
  6. 24 Jun 2019-26 Jun 2019
  7. 22 Jul 2019-24 Jul 2019
  8. 26 Agust 2019-28 Agust 2019
  9. 23 Sep 2019-25 Sep 2019
  10. 21 Okt 2019-23 Okt 2019
  11. 25 Nop 2019-27 Nop 2019
  12. 18 Des 2019-20 Des 2019

 

INVESTATION PRICE/PERSON

  1. Rp. 6.500.000/person (full fare) or
  2. Rp. 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

 TEKNIK HARGA PERHITUNGAN SENDIRI (HPS)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

SUPPLY MARKET ANALYSIS

Event

14 – 17 Januari 2019 | Rp 8.500.000/ peserta di Bandung
18 – 21 Februari 2019 | Rp 8.500.000/ peserta di Bandung
18 – 21 Maret 2019 | Rp 8.500.000/ peserta di Bandung
01 – 04 April 2019 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

INTRODUCTION

While understanding of supply market has improved, there  needs to be better  understanding in contracting authorities of the suppliers and the markets in which they operate and how these shape the nature and availability of goods or services used by these authorities. Supply market analysis is a technique  which  enables a  contracting  authority to understand how a market works, the direction in which a market is heading, the competitiveness of a market, the key suppliers and the value that suppliers place on the contracting authority as a customer. This can help inform, improve and shape the tendering process leading to improved  procurement outcomes such as  better  value for money or service, reduced prices or achieving whole of government outcomes.

 

TRAINING OBJECTIVES

  • To develop an in-depth understanding of the supply market for products/services/capital equipment purchased
  • To identify and evaluate key players in the supply market
  • To analyze industry trends and forces
  • To provide hands-on training in gathering industry information
  • To prepare a Supply Market Analysis Report for use in sourcing and negotiation
  • To enhance the credibility of buyers/commodity managers with the power of knowledge.

 

SUPPLY MARKET ANALYSIS TRAINING OUTLINE 

1.    Conducting the analysis of supply market

  • Before commencing any market analysis, the relevant individual or group in the  contracting authority should consider the aims and objectives of this research so that the analysis will provide the answers required within the time available.  For example the individual or group may want to consider whether the contracting authority is seeking
  • a reduction in  cost  and requires information on how the market prices a particular good or service
  • to understand  the range of suppliers in the market and the goods/services they provide in order to develop an appropriate specification
  • to understand the latest trends in technology in a particular sector
  • achieve a specific whole of Government objective such as developing an innovative product or service, achieving a specific  environmental standard or a particular social objective

2.    Analytical framework for supply market analysis

The information gathered during the research phase can be analysed using the supply market analysis framework which provides a structure for the analysis. This framework  can be used to  examine the supply market for a good or service and focuses on five key areas;

  • Market structure
  • Competition
  • Supply chain
  • Substitute goods and services
  • The contracting authority’s value as a customer

3.    Better knowledge of supplier strategy

Understanding how individual suppliers  operate, their market position, why they want to deal with the  contracting authority and  understanding their longer term goals  helps  obtain value for money. Analysing supply markets may:

  • Provide valuable information about suppliers’ strengths and weaknesses. For example, the  contracting authority may discover that a particular supplier is keen to win a Government contract or a supplier may have difficulty fulfilling orders.
  • Identify comparable substitute goods and services  that  may be available  from more  competitive and less risky supply markets and could  offer better value for money
  • Understand which suppliers are more technologically advanced in particular sectors
  • Identify opportunities to better manage the supply chain1 that will reduce the cost of purchasing goods or services
  • Allow the contracting authority to become aware of all potential suppliers (in a market with a limited number of suppliers, it is advantageous for the  contracting authority to encourage all  suppliers to tender).
  • Provide a sound understanding of the  contracting authority’s attractiveness as a customer  for the supplier. The more important the contracting authority is to the supplier in terms of the business generated the more likely better service and price becomes available from that supplier.

4.    Manage risk for the contracting authority

  • Analysing supply markets assists in determining  the  risks involved in purchasing particular goods or services. It can  also  identify ways to manage these risks. Analysing supply market may:
  • Assist in the development of specifications to encourage competitive offers and reduce the  possibility  of purchasing goods or services which are not fit for purpose. Specifications are often set which are too restrictive and reduce the number of potential suppliers. This is often the result of a limited knowledge of alternatives.
  • Identify opportunities to increase the base of suppliers to meet the needs of contracting authorities.

5.    More informed contracting authority

One of the aims of the procurement management reform process is  to help create a more informed contracting authority. With market analysis, the  contracting authority understands how  technology and other factors are driving changes in the market for the particular goods or services it requires. The contracting authority  understands how goods and services are priced and how service quality and standards are set by suppliers. Contracting authorities  who understand markets and suppliers are better able to develop tenders which reflect conditions in  that market. Indeedthey are able to help develop the market or suppliers so it can provide the goods or services necessary to the functioning of the  contracting authority. They are also able to deal with suppliers on a more equal basis when contracts are in place.

6.    Allow for the identification of opportunities to advance government priorities

Government policy requires value for money outcomes from procurement and this can include achieving whole of Government objectives. Procurement can assist in the development of environmental or social initiatives or it can become a force for innovation and help support small and medium enterprises to develop their potential.An informed knowledge of the market and the capabilities of suppliers can help bring a  better  approach to achieving whole of government objectives when contracting authorities are tendering. Thus, an informed knowledge of the ICT sector may allow for a tender which seeks an innovative response from the small business  software  sector. A better understanding of changes in environmentally friendly technology could help improve environmental outcomes from procurement.

7.    Competition

  • Do suppliers compete on quality, service, price and/or other factors
  • What are the trends in the supply market (for example, has product price consistently been reducing)
  • Is there any obvious competitive advantage held by a supplier
  • Are there any trade restrictions in the market
  • Is there impact of any trade, consumer or environmental legislation
  • What is the position of the product in its product life cycle, early, middle or late?

8.    Supply Chain

  • What firms make up the supply chain
  • How complex is the supply chain
  • What does each member of the supply chain contribute to the end product (the level of value-adding)
  • What are the delivery or transportation methods in the supply chain
  • Are there any potential areas of supply vulnerability within the chain
  • Are there any more efficient sources of supply

 

PARTICIPANT

  • General Manager
  • Supply Chain Manager
  • Marketing Manager
  • Purchasing Manager
  • Staff who was related for this training

 

INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

4 hari

 

JADWAL TRAINING 2019

  1. 14 Jan 2019-17 Jan 2019
  2. 18 Feb 2019-21 Feb 2019
  3. 18 Mar 2019-21 Mar 2019
  4. 01 Apr 2019-04 Apr 2019
  5. 20 Mei 2019-23 Mei 2019
  6. 18 Jun 2019-21 Jun 2019
  7. 16 Jul 2019-19 Jul 2019
  8. 19 Agust 2019-22 Agust 2019
  9. 16 Sep 2019-19 Sep 2019
  10. 15 Okt 2019-18 Okt 2019
  11. 18 Nop 2019-21 Nop 2019
  12. 09 Des 2019-12 Des 2019

 

INVESTATION PRICE/PERSON 

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10.  Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

SUPPLY MARKET ANALYSIS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

STRATEGIC PLANNING FOR INFORMATION SYSTEMS

Acara

02 – 04 Januari 2019 | Rp 6.500.000/ peserta di Bandung
06 – 08 Februari 2019 | Rp 6.500.000/ peserta di Bandung
13 – 15 Maret 2019 | Rp 6.500.000/ peserta di Bandung
22 – 24 April 2019 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

PENGANTAR

Sistem Informasi atau information systems di sebuah perusahaan mengumpulkan, menyimpan, mengambil kembali, mengolah dan menyajikan data dan informasi untuk mendukung kegiatan pengambilan keputusan oleh pimpinan dan manajer. Implementasi sistem informasi mencakup perekrutan staf, pengembangan perangkat lunak dan investasi perangkat keras. Tanpa perencanaan sistem informasi yang matang, implementasi yang melibatkan investasi sumberdaya perusahaan yang sangat besar, tidak akan memberikan revenue yang besar bagi perusahaan. Karena itu, sistem informasi tidak hanya dikembangkan dalam jangka pendek, namun harus direncanakan dengan sistematis dan strategis untuk menjaga keberlangsungan perusahaan dan keunggulan perusahaan di tengah-tengah persaingan.

 

MATERI TRAINING STRATEGIC PLANNING FOR INFORMATION SYSTEMS

  1. Evolusi peran IT dalam bisnis perusahaan
  2. Manajemen strategis
  3. Konsep Strategic Alignment
  4. Value chain analysis
  5. Strategic Information Systems Planning: The Phases

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?

Manajer dan staf IT dan manajer atau staf bagian lain yang akan dilibatkan dalam kegiatan audit IT dari aspek bisnis.

 

INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING

3 hari

 

JADWAL TRAINING 2019

  1. 02 Jan 2019-04 Jan 2019
  2. 06 Feb 2019-08 Feb 2019
  3. 13 Mar 2019-15 Mar 2019
  4. 22 Apr 2019-24 Apr 2019
  5. 27 Mei 2019-29 Mei 2019
  6. 26 Jun 2019-28 Jun 2019
  7. 08 Jul 2019-10 Jul 2019
  8. 14 Agust 2019-16 Agust 2019
  9. 11 Sep 2019-13 Sep 2019
  10. 07 Okt 2019-09 Okt 2019
  11. 13 Nop 2019-15 Nop 2019
  12. 02 Des 2019-04 Des 2019

 

INVESTATION PRICE/PERSON

  1. Rp. 6.500.000/person (full fare) or
  2. Rp. 6.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 5.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of information systems training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

STRATEGIC PLANNING FOR INFORMATION SYSTEMS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

SPARE PARTS MANAGEMENT

ACARA

07 – 10 Januari 2019 | Rp 8.500.000/ peserta di Bandung
12 – 15 Februari 2019 | Rp 8.500.000/ peserta di Bandung
05 – 08 Maret 2019 | Rp 8.500.000/ peserta di Bandung
08 – 11 April 2019 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

SPARE PARTS MANAGEMENT TRAINING OVERVIEW

Telah terjadi pergeseran paradigma dalam menjalankan beragam fungsi perusahaan. Persaingan dalam dunia industri yang sangat ketat menuntut berbagai perusahaan menjadikan setiap fungsi yang ada dalam perusahaan lebih dari sekedar mendukung kelancaran kegiatan perusahaan yaitu setiap fungsi menjadi keunggulan bersaing bagi perusahaan. Fungsi maintenance tak luput dari pergeseran paradigma tersebut. Perencanaan maintenance secara strategis adalah sesuatu yang mutlak. Respon atas perencanaan strategis adalah sistem maintenance harus dimutakhirkan, termasuk didalamnya manajemen suku cadang. Ketersediaan suku cadang merupakan kunci utama bagi kelancaran fungsi maintenance. Ketidaktersediaan suku cadang menyebabkan fungsi maintenance gagal berjalan dan berdampak bagi fungsi produksi.

 

SPARE PARTS MANAGEMENT TRAINING OUTLINE

  1. Konsep Maintenance Management Systems
  2. Gudang dan Key performance indicators
  3. Kebijakan inventory
  4. Management of repairable equipment
  5. Inventory policy guidelines
  6. Warehouse/stores documentation
  7. Maintenance documentation systems

 

HOW SHOULD ATTEND SPARE PARTS MANAGEMENT TRAINING?

Maintenance managers dan staff, Production managers dan staffs serta managers atau staffs yang memiliki relevansi erat bagi manajemen sumberdaya maintenance, seperti departemen keuangan.

 

SPARE PARTS MANAGEMENT TRAINING INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

SPARE PARTS MANAGEMENT TRAINING VENUE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

4 hari

 

JADWAL TRAINING 2019

  1. 07 Jan 2019-10 Jan 2019
  2. 12 Feb 2019-15 Feb 2019
  3. 05 Mar 2019-08 Mar 2019
  4. 08 Apr 2019-11 Apr 2019
  5. 14 Mei 2019-17 Mei 2019
  6. 17 Jun 2019-20 Jun 2019
  7. 01 Jul 2019-04 Jul 2019
  8. 06 Agust 2019-09 Agust 2019
  9. 03 Sep 2019-06 Sep 2019
  10. 30 Sep 2019-03 Okt 2019
  11. 05 Nop 2019-08 Nop 2019
  12. 16 Des 2019-19 Des 2019

 

INVESTATION PRICE/PERSON 

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

SPARE PARTS MANAGEMENT TRAINING FACILITIES

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

SPARE PARTS MANAGEMENT

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ROOT CAUSE ANALYSIS

Acara

28 – 31 Januari 2019 | Rp 8.500.000/ peserta di Bandung
25 – 28 Februari 2019 | Rp 8.500.000/ peserta di Bandung
26 – 29 Maret 2019 | Rp 8.500.000/ peserta di Bandung
02 – 05 April 2019 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

ROOT CAUSE ANALYSIS TRAINING OVERVIEW 

Root Cause Analysis (RCA) adalah sebuah proses yang dirancang untuk dimanfaatkan dalam melakukan investigasi dan pengkategorian berbagai akar masalah atas events yang memiliki dampak bagi keselamatan, kesehatan, lingkungan, kualitas, kehandalan dan produksi. Istilah kejadian digunakan secara umum untuk mengidentifikasi kejadian-kejadian yang menghasilkan atau memiliki potensi menghasilkan beragam konsekuensi. Ringkasnya, Root Cause Analysis (RCA) adalah tools yang digunakan untuk mengidentifikasi tidak hanya what dan how sebuah event terjadi, tetapi juga why event tersebut terjadi. Hanya ketika investigator mampu menentukan why sebuah event terjadi atau sebuah kegagalan terjadi, mereka akan mampu menspesifikasi tindakan-tindakan korektif yang akuntabel sekaligus mampu mencegah terjadinya kembali kegagalan tersebut dimasa mendatang. Pemahaman atas why sebuah event terjadi menjadi kunci utama bagi pengembangan rekomendasi yang efektif.

 

ROOT CAUSE ANALYSIS TRAINING OUTLINE

  1. Overview konsep reliability dan maintenance
  2. Konsep Failure Analysis, Root Cause and Failure Analysis dan Root Cause Analysis
  3. Klasifikasi Failure
  4. Lingkungan kondusif bagi pelaksanaan Root Cause Analysis (RCA)
  5. Opportunity Analysis dan Root Cause Analysis (RCA)
  6. RCA Tools dan Methods
  7. Penyajian temuan dan rekomendasi

 

HOW SHOULD ATTEND ROOT CAUSE ANALYSIS TRAINING?

Maintenance managers and staff, purchasing managers and staff, managers and staff, Warehousing, Distribution Manager and staff, finance managers and staff, Logistics Planner, Production Manager, Production Planner, Health and Safety managers and staffs and all positions are closely related to the maintenance or HSE management.

 

ROOT CAUSE ANALYSIS TRAINING INSTRUCTOR

Singgih Saptadi, ST.MT.

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

VENUE 

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

4 hari

 

JADWAL TRAINING 2019

  1. 28 Jan 2019-31 Jan 2019
  2. 25 Feb 2019-28 Feb 2019
  3. 26 Mar 2019-29 Mar 2019
  4. 02 Apr 2019-05 Apr 2019
  5. 06 Mei 2019-09 Mei 2019
  6. 24 Jun 2019-27 Jun 2019
  7. 29 Jul 2019-01 Agust 2019
  8. 27 Agust 2019-30 Agust 2019
  9. 24 Sep 2019-27 Sep 2019
  10. 28 Okt 2019-31 Okt 2019
  11. 26 Nop 2019-29 Nop 2019
  12. 10 Des 2019-13 Des 2019

 

INVESTATION PRICE/PERSON    

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. . Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

ROOT CAUSE ANALYSIS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

RELIABILITY CENTERED MAINTENANCE & RISK BASED INSPECTION

Acara

21 – 25 Januari 2019 | Rp 9.750.000/ peserta di Bandung
18 – 22 Februari 2019 | Rp 9.750.000/ peserta di Bandung
18 – 22 Maret 2019 | Rp 9.750.000/ peserta di Bandung
22 – 26 April 2019 | Rp 9.750.000/ peserta di Bandung

Jadwal Training 2019 Selanjutnya …

 

 

OVERVIEW TRAINING RELIABILITY CENTERED MAINTENANCE & RISK BASED INSPECTION

Aktivitas maintenance di dunia industri, terutama di dalam pabrik, dewasa ini memegang peran penting dalam dunia bisnis. Maintenance engineering telah enjadi bidang yang mengalami perkembangan pesat dalam dua dekade terakhir sejak Reliability Centered Management (RCM) muncul. Meski kemunculannya di lingkungan industri pesawat terbang, RCM juga menyebabkan pergeseran paradigma maintenance engineering di bidang-bidang industri yang lain. Dengan RCM, paradigma lama “preserve the equipment” bergeser menjadi “preserve the function”, tanpa melalaikan aspek “safety” fasilitas pabrik. Risk Based Inspection adalah suatu metoda yang relatif baru untuk melakukan inspeksi, khususnya terhadap mechanical integrity dari suatu pabrik. Dengan metode lama yang bermodalkan jadwal preventive/predictive maintenance, seorang maintenance engineer akan melakukan maintenance. Aktivitas maintenance seperti ini sifatnya statis tidak dinamis. Tidak ada metode sistematis untuk merubah interval waktu inspeksi berdasarkan hasil inspeksi sebelumnya, kerusakan yang teridentifikasi, serta umur peralatan. RBI menjadikan aktivitas maintenance lebih sensitif terhadap kondisi “sekarang” sebuah fasilitas pabrik. Diharapkan dengan pelatihan ini peserta dapat memahami konsep dasar Reliability Engineering dan aplikasinya dibidang industri sesuai standard yang ada, memahami cara meningkatkan    produktivitas dengan peningkatan Plant Availability, memahami aplikasi penggunaan risiko sebagai dasar pengelolaan program produksi dan mampu merancang serta mengaplikasikan tools yang lazim digunakan pada maintenance & inspection program

 

WHO SHOULD ATTEND THIS TRAINING?

Maintenance operator, supervisor, manager di berbagai industri.

 

RELIABILITY CENTERED MAINTENANCE TRAINING OUTLINE 

  1. Reliability Centered Maintenance (RCM)
    1. Introduction & Overview;
  • Overview of RCM
  • Fundamental RCM
  1. Qualitative & Quantitative Analysis
  2. Putting the Reliability into RCM
  3. Maintenance System Methodology
  4. Reliability Centered Maintenance Approach
  5. Exercise & Discussion
  6. Risk Based Inspection (RBI)
    1. Risk Based Inspection Principles Overview
    2. Risk Assessment & Risk Management
    3. Qualitative & Quantitative Approach
    4. Inspection Development Program to Reduce Risk.
    5. Exercise & Discussion

 

RINCIAN MATERI PER HARI

HARI 1:

  1. RCM Concepts
  2. Qualitative& Quantitative Analysis
  3. Putting the Reliability into RCM

HARI 2:

  1. Maintenance System Methodology
  2. Reliability Centered Maintenance Approach

HARI 3:

  1. Risk Based Inspection Principles Overview
  2. Risk Assessment & Risk Management

HARI 4:

  1. Qualitative & Quantitative Approach
  2. Inspection Development Program to Reduce Risk.

HARI 5:

  1. Exercise & Discussion

 

INSTRUCTOR

Singgih Saptadi, ST. MT. and Team

Singgih Saptadi, ST.MT.  adalah Master lulusan Teknik Industri ITB yang juga merupakan dosen tetap Teknik Industri UNDIP. Pernah menjabat Kepala Laboratorium Sistem Produksi dan Kepala Laboratorium Sistem Pendukung Keputusan Universitas Diponegoro. Bidang keahlian Beliau adalah Manajemen Operasi, Analisis dan Perancangan Pabrik, Manajemen pemeliharaan, Manajemen Resiko, Analisis Keputusan, Pengambilan Keputusan Multi-Kriteria, Supply-Chain Management Pemodelan dan Simulasi Sistem Industri, E-Business, Perencanaan dan Perancangan Sistem Perusahaan serta Perencanaan Strategis Sistem Informasi. Dengan kompetensi tersebut, Beliau terlibat dalam kegiatan konsultansi di Bank Indonesia, Pertamina, BRI, BNI, Holcim, Conoco Phillips, Freeport dan beberapa industri lainnya, termasuk perguruan tinggi. Selain itu, Beliau banyak memberikan pelatihan untuk industri dalam bidang-bidang kompetensi tersebut.

 

VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION

5  days

 

JADWAL TRAINING 2019

  1. 21 Jan 2019-25 Jan 2019
  2. 18 Feb 2019-22 Feb 2019
  3. 18 Mar 2019-22 Mar 2019
  4. 22 Apr 2019-26 Apr 2019
  5. 20 Mei 2019-24 Mei 2019
  6. 17 Jun 2019-21 Jun 2019
  7. 22 Jul 2019-26 Jul 2019
  8. 19 Agust 2019-23 Agust 2019
  9. 16 Sep 2019-20 Sep 2019
  10. 21 Okt 2019-25 Okt 2019
  11. 18 Nop 2019-22 Nop 2019
  12. 02 Des 2019-06 Des 2019

 

INVESTATION PRICE/PERSON 

  1. Rp. 9.750.000/person (full fare) or
  2. Rp. 9.500.000/person (early bird, payment 1 week before training) or
  3. Rp. 9.250.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

RELIABILITY CENTERED MAINTENANCE & RISK BASED INSPECTION

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days