Tag Archives: Motor Listrik

PEMELIHARAAN MOTOR LISTRIK

ACARA

20 – 23 April 2020 | Rp 8.750.000/ peserta di Bandung
11 – 14 Mei 2020 | Rp 8.750.000/ peserta di Bandung
09 – 12 Juni 2020 | Rp 8.750.000/ peserta di Bandung

Jadwal Training 2020 Selanjutnya …

 

 

TUJUAN TRAINING PEMELIHARAAN MOTOR LISTRIK

Pelatihan ini memberikan pengetahuan dan wawasan tentang operasi dan pemeliharaan motor-motor listrik di Industri. Pelatihan ditekankan pada Konstruksi, Prinsip operasi Instalasi dan Pemeliharaan motor listrik serta cara-cara melakukan pengujian komponen, instalasi, proteksi dan trouble shooting. Dengan demikian diharapkan peserta pelatihan memahami Instalasi, operasi, proteksi dan pemeliharaan motor-motor listrik secara komprehensif.

 

MATERI TRAINING PEMELIHARAAN MOTOR LISTRIK

  1. Electric Motor Fundamental (Fundamental Concepts, DC Motor, Type of Excitation, DC Motor Characteristic)
  2. Three Phase Induction Motor (Motor Construction, Princip of Operation, Motor Characteristic, Induction Motor Selection)
  3. Motor Starting Method(Direct On Line Starting, Residual Voltage Starting, Star/Delta Starting, Rotor Resistance Starting, Soft Starting)
  4. Motor Control Installation (Electrical Power Installation requirement, Motor Control Devices, Motor Control Circuits and wiring)
  5. Electric Motor Control (Methods of speed control, speed control of DC motors, speed control of induction motors)
  6. Motor Control Center (MCC Configuration, MCC requirements, MCC Spesification)
  7. Electric Motor Abnormal Condition (Overload, Unbalance, Single Phasing, Stall)
  8. Motor protection (Motor protective Devices, Motor Protection Scheme)
  9. Motor Current Signature Analysis
  10. Motor troubleshooting
  11. Motor maintenance

 

PESERTA TRAINING PEMELIHARAAN MOTOR LISTRIK:

untuk para operator, teknisi, engineer yang ingin mengetahui/mendalami tehnik pengoperasian dan pemeliharaan motor-motor listrik.

 

INSTRUCTOR :   Ir. Hasan Surya, MT. and Team

 

TEMPAT TRAINING PEMELIHARAAN MOTOR LISTRIK :

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING PEMELIHARAAN MOTOR LISTRIK :   4 hari

 

JADWAL TRAINING 2020

  1. 20 Apr 2020-23 Apr 2020
  2. 11 Mei 2020-14 Mei 2020
  3. 09 Jun 2020-12 Jun 2020
  4. 20 Jul 2020-23 Jul 2020
  5. 11 Agust 2020-14 Agust 2020
  6. 21 Sep 2020-24 Sep 2020
  7. 13 Okt 2020-16 Okt 2020
  8. 10 Nop 2020-13 Nop 2020
  9. 21 Des 2020-24 Des 2020

 

HARGA INVESTASI/PESERTA : 

  1. 8.750.000/peserta (bayar penuh) atau
  2. 8.500.000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. 8.250.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

PEMELIHARAAN MOTOR – MOTOR LISTRIK

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

MOTOR REWINDING

ACARA

28 – 30 April 2020 | Rp 6.500.000/ peserta di Bandung
18 – 20 Mei 2020 | Rp 6.500.000/ peserta di Bandung
24 – 26 Juni 2020 | Rp 6.500.000/ peserta di Bandung

Jadwal Training 2020 Selanjutnya …

 

 

MOTOR REWINDING TRAINING OBJECTIVE

Pelatihan ini memberikan pengetahuan, wawasan dan ketrampilan tentang operasi dan pemeliharaan system motor-motor listrik di Industri. Pelatihan ditekankan pada pengetahuan dan keterampilan melakukan rewinding motor listrik terutama pada motor induksi tiga fasa maupun satu fasa secara komprehensif.

 

MOTOR REWINDING TRAINING OUTLINE

  1. Electric Motor Fundamental (Fundamental Concepts, DC Motor, Type of Excitation, DC Motor Characteristic)
  2. Three Phase Induction Motor (Motor Construction, Princip of Operation, Motor Characteristic, Induction Motor Selection)
  3. Single Phase Induction Motor (Motor Construction, Princip of Operation, Types of Single phase Induction Motor and Characteristic, Induction Motor Selection)
  4. Types of Insulation Material
  5. Types of Stator Winding
  6. Types of Rotor Winding
  7. Rewinding practices
  8. Motor maintenance and troubleshooting

 

WHO SHOULD ATTEND THIS MOTOR REWINDING TRAINING?

untuk para operator, teknisi, engineer yang ingin mengetahui/mendalami tehnik pengoperasian dan pemeliharaan motor-motor listrik.

 

INSTRUKTUR MOTOR REWINDING

Hasan Surya, Ir., MT. and Team

 

VENUE MOTOR REWINDING

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

MOTOR REWINDING TRAINING DURATION

3 days

 

JADWAL TRAINING 2020

  1. 28 Apr 2020-30 Apr 2020
  2. 18 Mei 2020-20 Mei 2020
  3. 24 Jun 2020-26 Jun 2020
  4. 28 Jul 2020-30 Jul 2020
  5. 26 Agust 2020-28 Agust 2020
  6. 30 Sep 2020-02 Okt 2020
  7. 28 Okt 2020-30 Okt 2020
  8. 25 Nop 2020-27 Nop 2020
  9. 29 Des 2020-31 Des 2020

 

INVESTATION PRICE/PERSON

  1. Rp. 6.500.000/peserta (bayar penuh)  atau
  2. Rp. 6.250.000/peserta (early bird, yang membayar 1 minggu sebelum training)  atau
  3. Rp. 5.950.000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS

  1. Modul Training
  2. Flash Disk berisi materi training
  3. Sertifikat
  4. ATK: Blocknote dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari tempatyang sama ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

MOTOR REWINDING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

INSTALASI TENAGA LISTRIK

ACARA

09 – 12 Maret 2020 | Rp 8.500.000/ peserta di Bandung
31 Maret – 03 April 2020 | Rp 8.500.000/ peserta di Bandung
05 – 08 Mei 2020 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2020 Selanjutnya …

 

 

INSTALASI TENAGA LISTRIK TRAINING OBJECTIVES 

  1. Peserta dapat mengenal sistem instalasi tenaga listrik
  2. Peserta dapat mengenal prinsip kerja dan sistem kontral motor
  3. Peserta dapat memahami instalasi panel dan dapat memilih komponen berdasarkan standar

 

INSTALASI TENAGA LISTRIK TRAINING MATERIAL OUTLINE

  1. Pendahuluan
  2. Pengenalan motor listrik
    • Prinsip kerja motor induksi
    • Arus start, Torsi start, dan torsi nominal
    • Karakteristik motor listrik
    • Dasar perbaikan bagian mekanis
  1. Pengenalan Panel Instalasi tenaga
    • Pengenalan panel menurut standar
    • Instalasi panel
    • Rangkaian kontrol  magnetic
  1. Sistem pengasutan DOL
  2. Sistem pengasutan bintang delta

 

WHO SHOULD ATTEND THIS TRAINING?

  1. Electrical Engineer / Supervisor
  2. Instrument Engineer / Supervisor
  3. Professionals
  4. Plant Maintenance / Operators / Supervisor / Superintendent

 

INSTALASI TENAGA LISTRIK TRAINING INSTRUCTOR

Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait

 

INSTALASI TENAGA LISTRIK TRAINING VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

4  days

 

JADWAL TRAINING 2020

  1. 09 Mar 2020-12 Mar 2020
  2. 31 Mar 2020-03 Apr 2020
  3. 05 Mei 2020-08 Mei 2020
  4. 16 Jun 2020-19 Jun 2020
  5. 30 Jun 2020-03 Jul 2020
  6. 18 Agust 2020-21 Agust 2020
  7. 01 Sep 2020-04 Sep 2020
  8. 20 Okt 2020-23 Okt 2020
  9. 17 Nop 2020-20 Nop 2020
  10. 01 Des 2020-04 Des 2020

 

INVESTATION PRICE/ PERSON

  1. 8.500.000/person (full fare) or
  2. 8.250.000/person (early bird, payment 1 week before training) or
  3. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

SISTEM INSTALASI TENAGA LISTRIK

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

PENGENDALIAN MOTOR LISTRIK SECARA ELEKTRONIK

ACARA

09 – 12 Maret 2020 | Rp 8.500.000/ peserta di Bandung
20 – 23 April 2020 | Rp 8.500.000/ peserta di Bandung
05 – 08 Mei 2020 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2020 Selanjutnya …

 

 

PENGENDALIAN MOTOR LISTRIK SECARA ELEKTRONIK TRAINING OBJECTIVES 

  1. Peserta memahami prinsip operasi pengendalian kecepatan motor
  2. Peserta dapat melakukan troble shooting pada pengendalian kecepatan motor

 

PENGENDALIAN MOTOR LISTRIK SECARA ELEKTRONIK TRAINING MATERIAL OUTLINE

  1. Pendahuluan
  2. OP – AMP Application
  3. Power semi conductor component
  4. Pengujian komponen semikonduktor
  5. Rangkaian penyulut Thyristor
  6. PWM Generator
  7. AC – DC Converter
  8. Speed control of DC motor
  9. DC Motor drive
  10. Trouble shooting on DC motor drive
  11. DC – AC Converter
  12. Speed control of induction motor
  13. AC Motor drives
  14. Trouble shooting on AC Motor drive

 

WHO SHOULD ATTEND THIS TRAINING?:

  1. Electrical & Mechanical Engineer / Supervisor
  2. Instrument Engineer / Supervisor
  3. Professionals
  4. Plant Maintenance / Operators / Supervisor / Superintendent

 

INSTRUCTO

Tim Instruktur dari Politeknik Negeri Bandung (POLBAN) yang sudah berpengalaman mengajar di bidang kompetensi terkait.

 

PENGENDALIAN MOTOR LISTRIK SECARA ELEKTRONIK TRAINING VENUE

Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION

4  days

 

JADWAL TRAINING 2020

  1. 09 Mar 2020-12 Mar 2020
  2. 20 Apr 2020-23 Apr 2020
  3. 05 Mei 2020-08 Mei 2020
  4. 15 Jun 2020-18 Jun 2020
  5. 20 Jul 2020-23 Jul 2020
  6. 18 Agust 2020-21 Agust 2020
  7. 21 Sep 2020-24 Sep 2020
  8. 19 Okt 2020-22 Okt 2020
  9. 16 Nop 2020-19 Nop 2020
  10. 21 Des 2020-24 Des 2020

 

INVESTMENT PRICE/PERSON

  1. 8.500.000/person (full fare) or
  2. 8.250.000/person (early bird, payment 1 week before training) or
  3. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)



PENGENDALIAN MOTOR LISTRIK SECARA ELEKTRONIK

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

VARIABLE FREQUENCY DRIVES

ACARA

17 – 19 Maret 2020 | Rp 6.500.000 per peserta di Yogyakarta
06 – 08 April 2020 | Rp 6.500.000 per peserta di Yogyakarta
12 – 14 Mei 2020 | Rp 6.500.000 per peserta di Yogyakarta

Jadwal Training 2020 Selanjutnya …

 

 

DESKRIPSI TRAINING VARIABLE FREQUENCY DRIVES

Kegiatan pelatihan ini akan memberikan pengetahuan dan keterampilan tentang operasi dan pemeliharaan pengendali kecepatan otomatis yang dapat diatur dari motor-motor listrik di Industri. Pembahasan ditekankan pada pemilihan-pemilihan jenis VFD, unjuk kerja, cara pengoperasian/instalasi motor listrik, serta cara-cara melakukan pengujian komponen, instalasi, proteksi dan trouble shooting pada VFD. Setelah mengikuti pelatihan ini, diharapkan peserta dapat memahami mekanisme kerja dan pemeliharaan Frequency Drives secara komprehensif.

 

MATERI TRAINING VARIABLE FREQUENCY DRIVES

  1. Introduction:
    • Evolution of Adjustable Speed Motor Control
    • Modern Types of Variable Frequency Drives
  2. Motor Induksi 3 Fasa
  3. Karakteristik Motor Induksi 3 Fasa
  4. Prinsip dan Konsep Pengendali Kecepatan Motor Induksi 3 Fasa
  5. Kinerja Motor Listrik pada kondisi abnormal
  6. Macam-Macam Pengendali Kecepatan
  7. Variable Frequency Drive
  8. Power Semi Conductor
  9. Konverter-konverter Statis
  10. Konverter AC ke DC
  11. Konverter DC ke AC
  12. Pengujian Komponen
  13. Prinsip Sistem kendali Otomatis
  14. Komponen Sistem Kendali
  15. Pengendali Kecepatan Motor DC
  16. Pengendali Kecepatan Motor Induksi
  17. Instalasi dan proteksi
  18. Teknologi pengendalian pada system VFD
  19. Kontribusi Harmonik VFD pada sistem
  20. Applications
    • Methods of Proper Drive Selection
    • Multi-Motor Drive Systems With Example Problem
    • Using VFDs to Eliminate Geared Speed Reducers
    • Effects of AC Drives on Geared Speed Reducers
    • Replacing Mechanical Speed Changers With VFDs

 

INSTRUKTUR TRAINING VARIABLE FREQUENCY DRIVES

  • Miftakhul Hudha, S.T., M.Eng.Sc.
  • Tugino, S.T., M.T.

Nara sumber adalah pakar di bidang Electrical Engineering yang sering memberikan materi di berbagai training, seminar, workshop, terutama yang berkaitan dengan topik Variable Frequency Drives.

 

METODE TRAINING VARIABLE FREQUENCY DRIVES

  • Presentasi
  • Diskusi Interaktif
  • Studi Kasus
  • Simulasi
  • Evaluasi

 

PESERTA TRAINING VARIABLE FREQUENCY DRIVES

Pelatihan ini sesuai untuk diikuti oleh: Para Operator, Electrical Engineers, Technicians, Designers & Electrical Maintenance Personnel yang tugasnya berkaitan dengan Variable Frequency Drives, serta mereka yang ingin mengetahui/mendalami tehnik pengoperasian dan pemeliharaan sistem pengendali kecepatan.

 

JADWAL TRAINING 2020

  • Batch 3 : 17 – 19 Maret 2020
  • Batch 4 : 06 – 08 April 2020
  • Batch 5 : 12 – 14 Mei 2020
  • Batch 6 : 16 – 18 Juni 2020
  • Batch 7 : 27 – 29 Juli 2020
  • Batch 8 : 25 – 27 Agustus 2020
  • Batch 9 : 28 – 30 September 2020
  • Batch 10 : 13 – 15 Oktober 2020
  • Batch 11 : 10 – 12 November 2020
  • Batch 12 : 08 – 10 Desember 2020
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta; Neo + Awana Hotel Yogyakarta; Pesonna Malioboro Hotel Yogyakarta
Surabaya: Hotel Neo Gubeng Surabaya; Hotel Santika Pandegiling Surabaya
Malang: Ibis Styles Malang Hotel
Jakarta: Yello Hotel Manggarai Jakarta; Dreamtel Jakarta Hotel
Bandung: Serela Cihampelas Hotel Bandung; Grand Setiabudi Hotel Bandung; Grand Tebu Hotel Bandung
Bali: Ibis Bali Kuta Hotel; Hotel Neo + Kuta Legian Bali

In House Training : Depend on request

 

TUITION FEE TRAINING

Yogyakarta:

  • Publish Rate       : Rp 6.500.000,- / participant
  • Special Rate        : Rp 6.100.000,- / participant (min 4 participants from the same company)

Bandung/ Jakarta/ Surabaya/ Malang:

  • Publish Rate       : Rp 7.000.000,- / participant

Bali:

  • Publish Rate       : Rp 8.000.000,- / participant

 

FASILITAS TRAINING

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Sertifikat
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Pajak (Ppn 10 %)

 

VARIABLE FREQUENCY DRIVES: OPERATION, PROTECTION & MAINTENANCE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

ELECTRICAL MOTOR DRIVES: AC/ DC

ACARA

17 – 19 Maret 2020 | Rp 6.500.000 per peserta di Yogyakarta
06 – 08 April 2020 | Rp 6.500.000 per peserta di Yogyakartaa
12 – 14 Mei 2020 | Rp 6.500.000 per peserta di Yogyakarta

Jadwal Training 2020 Selanjutnya …

 

 

ELECTRICAL MOTOR DRIVES TRAINING OVERVIEW

This course covers AC/DC electrical motor drives for speed/position control.  It presents an integrated discussion of AC/DC electric motor, power electronics, and control systems. Applications of electric drives can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of AC/DC electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot AC/DC electrical motors drives. The course focuses on the dc and ac motor from solid state converters for better torque and speed response. Advanced control techniques are applied to optimize the performance of dc/ac motor drives. Since majority of modern drives are dc/ac motor drives, the course centers around the control of dc/ac motor drives. Participant will gain a fundamental understanding of the  AC/DC electrical motor drives, installation, operation and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life.  Finally, control aspects of some special motors, such as permanent magnet synchronous motor, brushless dc motor, switched reluctance motor, etc. Computer simulations are used for understanding AC/DC electric motor, power-electronics based converters and the design of control systems.

 

ELECTRICAL MOTOR DRIVES TRAINING OBJECTIVES

After successfully completing this course, Participants will able to do the following:

  • Understand the AC/DC electrical motor drives basic principles
  • Describe the Electric Drive systems and various applications such as flexible production systems, industries, transportation, robotics and process control
  • Understand the principle on AC/DC electrical motor
  • Understand the basic principles of power electronics in drives using switch-mode converters and pulse width modulation
  • Design torque, speed, and position controllers of motor drives
  • Explain operating principles, major components and control logic used with AC and DC drive speed controls
  • Learn the stepper motors and switched-reluctance motor drives
  • Get an appreciation of power quality issues in powering electric drives
  • Compare the advantages and disadvantages of AC DC drives based on application
  • Discuss the advantages of using variable speed drives in constant torque and variable horsepower loads
  • Understand the Troubleshoot of AC/DC electrical motor drives

 

ELECTRICAL MOTOR DRIVES TRAINING CONTENTS

  1. Introduction to AC/DC electrical motor drives.
  2. Basic principles of electro-mechanical energy conversion (Efficiency, torque, inertia, horsepower/power factor, Torque-speed curves)
  3. Principles of AC electrical motor (operating system and control)
  4. Principles of DC electrical motor (operating system and control)
  5. Basic understanding of switch-mode power electronic converters in electric drives
  6. DC-motor drives and electronically-commutated motor drives
  7. DC motor drives  (Speed-torque characteristics DC shunt,  series, Speed and position control methods)
  8. Designing feedback controllers for motor drives
  9. Introduction to AC machines (Induction-synchronous motors)
  10. Induction-motor drives: speed control
  11. Vector control of induction-motor drives
  12. Reluctance drives: stepper-motor and switched-reluctance drives
  13. Energy efficiency of electric drives and inverter-motor interactions
  14. Powering electric drives: power quality issues
  15. Ancillary issues in drives: sensors and controllers
  16. Converters and control (Phase controlled converters, Four quadrant operation Choppers,  AC to DC converters)
  17. Inverters and PWM techniques
  18. Voltage source inverters, current source inverters and PWM techniques
  19. Power Quality issue: Harmonic elimination
  20. Advance induction motor control (constant flux speed control ,vector control)
  21. Troubleshoot AC/DC electrical motor drives

 

WHO SHOULD ATTEND:

This training is recommended to be followed by :

  • Industrial, Commercial, Institutional Electrical Engineering & Maintenance Technicians
  • Electric Motor Operations staff
  • Other electrical personnel involved in the operation & control of electric motors

 

ELECTRICAL MOTOR DRIVES TRAINING METHODS

  • Lecturing
  • Discussion/Sharing
  • Case Study
  • Simulation
  • Evaluation

 

ELECTRICAL MOTOR DRIVES TRAINING INSTRUCTOR

  • Miftakhul Hudha, S.T., M.Eng.Sc.
  • Syafriyudin, S.T., M.T.

 

JADWAL TRAINING 2020

  • Batch 3 : 17 – 19 Maret 2020
  • Batch 4 : 06 – 08 April 2020
  • Batch 5 : 12 – 14 Mei 2020
  • Batch 6 : 16 – 18 Juni 2020
  • Batch 7 : 14 – 16 Juli 2020
  • Batch 8 : 25 – 27 Agustus 2020
  • Batch 9 : 22 – 24 September 2020
  • Batch 10 : 13 – 15 Oktober 2020
  • Batch 11 : 17 – 19 November 2020
  • Batch 12 : 08 – 10 Desember 2020
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta; Neo + Awana Hotel Yogyakarta; Pesonna Malioboro Hotel Yogyakarta
Surabaya: Hotel Neo Gubeng Surabaya; Hotel Santika Pandegiling Surabaya
Malang: Ibis Styles Malang Hotel
Jakarta: Yello Hotel Manggarai Jakarta; Dreamtel Jakarta Hotel
Bandung: Serela Cihampelas Hotel Bandung; Grand Setiabudi Hotel Bandung; Grand Tebu Hotel Bandung
Bali: Ibis Bali Kuta Hotel; Hotel Neo + Kuta Legian Bali

In House Training : Depend on request

 

TUITION FEE TRAINING

Yogyakarta:

  • Publish Rate       : Rp 6.500.000,- / participant
  • Special Rate        : Rp 6.100.000,- / participant (min 4 participants from the same company)

Bandung/ Jakarta/ Surabaya/ Malang:

  • Publish Rate       : Rp 7.000.000,- / participant

Bali:

  • Publish Rate       : Rp 8.000.000,- / participant

 

FASILITAS TRAINING

INCLUDE:

  • Meeting Room at hotel, Coffe Break, Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit, Souvenir, Sertifikat
  • Airport pick up services
  • Transportation during training

EXCLUDE:

  • Penginapan peserta training
  • Pajak (Ppn 10 %)

 

AC/DC ELECTRICAL MOTOR DRIVES

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

PELATIHAN & SERTIFIKASI OPERATOR GONDOLA (Confirmed)

Gondola
Operator Gondola

ACARA

11 – 13 Februari 2020 | 08.00 – 16.00 | Rp 4.500.000 di Training Center Jakarta
10 – 12 Maret 2020 | 08.00 – 16.00 | Rp 4.500.000 di Training Center Jakarta
31 Maret – 02 April 2020 | 08.00 – 16.00 | Rp 4.500.000 di Training Center Jakarta

Jadwal Training 2020 Selanjutnya …

 

 

Tujuan Pelatihan Operator Gondola

Mempersiapkan dan menghasilkan Operator Gondola yang berkompeten, Operator Gondola yang dapat melakukan pengoperasian, perawatan dan mampu mengurangi resiko terjadinya kecelakaan di bidang Pesawat Angkat Angkut. Mempersiapkan tenaga pelaksana yang mampu melaksanakan prosedur pengoperasian dengan mempertimbangkan prosedur K3 Gondola di tempat kerjanya.

 

Materi Pelatihan Operator Gondola

Kelompok Dasar:

  1. Kebijakan keselamatan & Kesehatan Kerja
  2. Peraturan Perundangan Pesawat Angkat Angkut
  3. Dasar-dasar K3 dan P3K

Kelompok Inti:

  1. Pengetahuan dasar Gondola
  2. Pengetahuan dasar motor listrik
  3. Perangkat keselamatan kerja (safety devices)
  4. Tali kawat baja dan alat bantu angkat
  5. Sebab – sebab kecelakaan pada Gondola
  6. Menghitung berat beban
  7. Pengoperasian aman
  8. Pemeriksaan dan perawatan
  9. Ujian Teori & Ujian Praktek

 

Instruktur Pelatihan Operator Gondola

Kemenakertrans RI & Praktisi

 

Persyaratan Peserta Pelatihan Operator Gondola

Berpendidikan SMU / Sederajat (SMK Teknik) dengan pengalaman kerja 1 tahun

 

Jadwal Pelatihan 2020

  • 11 – 13 Februari 2020
  • 10 – 12 Maret 2020
  • 31 Mar-2 Apr; 22 – 24 April 2020
  • 16 – 18 Juni 2020
  • 07 – 09; 28 – 30 Juli 2020
  • 11 – 13; 25 – 27 Agustus 2020
  • 07 – 09; 28 – 30  September 2020
  • 06 – 08 Oktober 2020
  • 10 – 12; 23 – 25 November 2020

Jam : 08.00 – 16.00

Tempat: Training Center, Jl. Pondasi No. 33 E Kampung Ambon – Jakarta Timur

 

Biaya Pelatihan Operator Gondola

  • Rp 4.500.000 ,- (Empat Juta Lima Ratus Ribu Rupiah).
  • Biaya tersebut sudah termasuk Fee Instruktur Class room dan Lapangan, Penggandaan materi, Training kit, 2x Coffee Break, Lunch, Sertifikat, SIO dari Kementrian Tenaga Kerja dan Transmigrasi RI.
  • Tidak termasuk pajak – pajak.

 

SERTIFIKASI PELATIHAN OPERATOR GONDOLA

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

SISTEM KONTROL MOTOR LISTRIK

ACARA

03 – 06 Februari 2020 | Rp 8.500.000/ peserta di Bandung
17 – 20 Maret 2020 | Rp 8.500.000/ peserta di Bandung
27 – 30 April 2020 | Rp 8.500.000/ peserta di Bandung

Jadwal Training 2020 Selanjutnya …

 

 

TUJUAN TRAINING SISTEM KONTROL MOTOR LISTRIK

Diharapkan setelah mengikuti pelatihan, peserta:

  1. Menambah wawasan tentang klasifikasi motor listrik dan sistem pengaturannya
  2. Mampu merancang dan memodifikasi  sistem pengaturan motor listrik
  3. Mampu mengidentifikasi/memperbaiki motor listrik.

 

MATERI TRAINING SISTEM KONTROL MOTOR LISTRIK

  1. Introduksi
    1. Motor listrik dalam kehidupan sehari-hari
  • Rumah tangga
  •  Industri
  1. Identifikasi motor listrik
  • Ø Konstruksi
  • Ø Spesifikasi
  • Ø Papulasi
  1. Dasar-Dasar Teori Motor  Listrik & Elektronika Daya
    1. Prinsip kerja motor listrik
    2. Prinsip kerja solid state
    3. Klasifikasi motor listrik dan solid state
  2. Karakteristik motor listrik Brusless, Brushes, Servo,Stepper,Sinkron,Induksi dll
    1. Torsi vs putaran
    2. Torsi vs arus armatur
    3. Torsi vs arus medan
  3. Sistem kendali Motor listrik
    1. Pengaturan arus medan
    2. Pengaturan tegangan sumber
    3. Pengaturan arus armatur
    4. Pengaturan dengan solid state
    5. Pengaturan dengan solid state
  4. Elektronika daya
    1. Karakteristik dioda & Thyristor
    2. Rectifier
    3. Konverter
    4. Inverter
    5. Pulse widh modulation (PWM)
  5. Sistem kendali motor listrik dengan solidstate
    1. Motor DC brushed dan brushless
    2. Motor universal
    3. Motor induksi
  6. Perawatan dan pemeliharaan
  7. Kunjungan laboratorium
    1. Pengenalan motor listrik
    2. Konstruksi
    3. Pengujian prestasi
    4. Pengenalan sistem pengaturan motor listrik

 

INSTRUCTOR

Ir. SYAHBARDIA, MT

Ir. SYAHBARDIA, MT.  alumni dari teknik mesin Institut teknologi Bandung, ITB (sarjana), dan teknik material ITB untuk program magister. Beliau pernah menjadi dosen di Politeknik ITB/POLBAN dan sekarang Beliau menjadi dosen di jurusan teknik di universitas Pasundan, Bandung. Beliau memiliki pengalaman lapangan praktis sebagai mechanical engineer ketika beliau bekerja, seperti di IPTN, PINDAD, dan PAL. Ir. Syahbardia,MT. sudah sering menjadi instruktur di training-training industri untuk perusahaan-perusahaan di Indonesia. Diantara judul-judul yang Beliau sampaikan adalah Predictive and Preventive Pump Maintenance, Compressor Characteristic Maintenance & Troubleshooting, Rotary Equipment Maintenance, Lubrication, Operation, Maintenance and Trouble Shooting, Materials Selection and Knowledge for Engineers, Centrifugal Compresor & Steam Turbine Performance, Welding Inspection, Turbine & Generator Operation, Boiler Water Treatment, Pump Operation and Maintenance, Electrical Motor Control System, Corrosion and Cathodic Protection, Fluid Flow Measurement, Generator Preventive Maintenance, Heavy Equipment Management, Preventive and Predictive Maintenance, dan lain-lain.

 

VENUE 

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION 

4 days

 

JADWAL TRAINING 2020

  1. 03 Feb 2020-06 Feb 2020
  2. 17 Mar 2020-20 Mar 2020
  3. 27 Apr 2020-30 Apr 2020
  4. 11 Mei 2020-14 Mei 2020
  5. 02 Jun 2020-05 Jun 2020
  6. 27 Jul 2020-30 Jul 2020
  7. 03 Agust 2020-06 Agust 2020
  8. 29 Sep 2020-02 Okt 2020
  9. 05 Okt 2020-08 Okt 2020
  10. 02 Nop 2020-05 Nop 2020
  11. 28 Des 2020-31 Des 2020

 

INVESTATION PRICE/ PERSON 

  1. Rp. 8.500.000/ person (full fare) or
  2. Rp. 8.250.000/ person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/ person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS

  •     Training Module
  •     Flashdisk contain training material
  •     Certificate
  •     NoteBook and Ballpoint
  •     T-Shirt
  •     Backpack
  •     Training Foto
  •     Training room with full ac facilities and multimedia
  •     Lunch and twice coffee break everyday of training
  •     Qualified Instructor
  •     Transportation from hotel of participants to hotel of training VV (if minimal participants from the same company is 4 )

 

SISTEM KONTROL MOTOR LISTRIK

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

AC/ DC ELECTRICAL MOTOR – Confirmed

ACARA

06 – 08 Januari 2020 | Rp 6.900.000 di Hotel Ibis Malioboro, Yogyakarta
13 – 15 Januari 2020 | Rp 6.900.000 di Hotel Ibis Malioboro, Yogyakarta
03 – 05 Februari 2020 | Rp 6.900.000 di Hotel Ibis Malioboro, Yogyakarta – CONFIRMED

Jadwal Training 2020 Selanjutnya …

 

ADVANCE ELECTRICAL MOTOR TRAINING DESCRIPTION

This course covers AC/ DC electrical motor drives for speed/position control. It presents an integrated discussion of AC/ DC electric motor, power electronics, and control systems. Applications of electric drives can be found in industries, electric transportation, robotics, process control and energy conservation. This course gives a thorough understanding of AC/ DC electrical motor’s working, control , protection, maintenance, failure modes and the tools to maintain and troubleshoot AC/ DC electrical motors drives. The course focuses on the dc and ac motor from solid state converters for better torque and speed response. Advanced control techniques are applied to optimize the performance of dc/ac motor drives. Since majority of modern drives are dc/ac motor drives, the course centers around the control of dc/ac motor drives.

Participant will gain a fundamental understanding of the AC/ DC electrical motor drives, installation, operation and troubleshooting. Participant will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life. Finally, control aspects of some special motors, such as permanent magnet synchronous motor, brushless dc motor, switched reluctance motor, etc. Computer simulations are used for understanding AC/ DC electric motor, power-electronics based converters and the design of control systems.

 

ADVANCE ELECTRICAL MOTOR TRAINING PURPOSE

After successfully completing this course, Participants will able to do the following:

  1. Understand the AC/ DC electrical motor drives basic principles
  2. Describe the Electric Drive systems and various applications such as flexible production systems, industries, transportation, robotics and process control.
  3. Understand the principle on AC/ DC electrical motor.
  4. Understand the basic principles of power electronics in drives using switch-mode converters and pulse width modulation.
  5. Design torque, speed, and position controllers of motor drives.
  6. Explain operating principles, major components and control logic used with AC and DC drive speed controls.
  7. Learn the stepper motors and switched-reluctance motor drives.
  8. Get an appreciation of power quality issues in powering electric drives.
  9. Compare the advantages and disadvantages of AC DC drives based on application.
  10. Discuss the advantages of using variable speed drives in constant torque and variable horsepower loads.
  11. Understand the Troubleshoot  of AC/ DC electrical motor drives.

 

ADVANCE ELECTRICAL MOTOR TRAINING OUTLINE

  1. Introduction to AC/ DC electrical motor drives.
  2. Basic principles of electro-mechanical energy conversion (Efficiency, torque, inertia, horsepower/power factor, Torque-speed curves)
  3. Principles of AC electrical motor (operating system and control)
  4. Principles of DC electrical motor (operating system and control)
  5. Basic understanding of switch-mode power electronic converters in electric drives.
  6. DC-motor drives and electronically-commutated motor drives.
  7. DC motor drives  (Speed-torque characteristics DC shunt,  series, Speed and position control methods )
  8. Designing feedback controllers for motor drives.
  9. Introduction to AC machines (Induction-synchronous motors)
  10. Induction-motor drives: speed control.
  11. Vector control of induction-motor drives.
  12. Reluctance drives: stepper-motor and switched-reluctance drives.
  13. Energy efficiency of electric drives and inverter-motor interactions.
  14. Powering electric drives: power quality issues.
  15. Ancillary issues in drives: sensors and  controllers.
  16. Converters and control (Phase controlled converters, Four quadrant operation Choppers, AC to DC converters)
  17. Inverters and PWM techniques
  18. Voltage source inverters, current source inverters and PWM techniques
  19. Power Quality issue: Harmonic elimination
  20. Advance induction motor control (constant flux speed control ,vector control)
  21. Troubleshoot AC/ DC electrical motor drives

 

Jadwal Training 2020

Hotel Ibis Malioboro, Yogyakarta

  • 6 – 8 Januari 2020
  • 13 – 15 Januari 2020
  • 20 – 22 Januari 2020
  • 27 – 29 Januari 2020
  • 3- 5 Februari 2020
  • 10 – 12 Februari 2020
  • 17 – 19 Februari 2020
  • 26 – 28 Februari 2020
  • 2 – 4 Maret 2020
  • 9 – 11 Maret 2020
  • 16 – 18 Maret 2020
  • 23 – 24 Maret 2020
  • 30 Maret 2020 – 1 April 2020
  • 6 – 8 April 2020
  • 13 – 15 April 2020
  • 20 – 22 April 2020
  • 27 – 29 April 2020
  • 4 – 6 Mei 2020
  • 11 – 13 Mei 2020
  • 2 – 4 Juni 2020
  • 8 – 10 Juni 2020
  • 15 – 17 Juni 2020
  • 22 – 24 Juni 2020
  • 29 Juni 2020 – 1 Juli 2020
  • 6 – 8 Juli 2020
  • 13 – 15 Juli 2020
  • 20 – 22 Juli 2020
  • 27 – 29 Juli 2020
  • 3 – 5 Agustus 2020
  • 10 – 12 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 26 Agustus 2020
  • 31 Agustus 2020 – 2 September 2020
  • 7 – 9 September 2020
  • 14 – 16 September 2020
  • 21 – 23 September 2020
  • 28 – 30 September 2020
  • 5 – 7 Oktober 2020
  • 12 – 14 Oktober 2020
  • 19 – 21 Oktober 2020
  • 26 – 28 Oktober 2020
  • 2 – 4 November 2020
  • 9 – 11 November 2020
  • 16 – 18 November 2020
  • 23 – 25 November 2020
  • 30 November 2020 – 2 Desember 2020
  • 7 – 9 Desember 2020
  • 14 – 16 Desember 2020
  • 21 – 23 Desember 2020
  • 28 – 30 Desember 2020

 

Investasi & Fasilitas

  • Rp 6.900.000 (Non Residential)
  • Jika Perusahaan/ Instansi mengirimkan lebih dari satu peserta pada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta.
  • VIP training Rp 7.900.000 >> (2019), VIP training Rp 8.900.000 >> (2020) (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING

Tugino, ST MT & Team

 

ADVANCE ELECTRICAL MOTOR

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days

Instalasi Listrik dan Proteksi Listrik

ACARA

09 – 11 September 2019 | Rp 6.900.000,- di Hotel Ibis Malioboro, Yogyakarta
23 – 25 September 2019 | Rp 6.900.000,- di Hotel Ibis Malioboro, Yogyakarta

Jadwal Training 2019 Selanjutnya …

06 – 08 Januari 2020 | Rp 6.900.000 per peserta di Hotel Ibis Malioboro, Yogyakarta

Jadwal Training 2020 Selanjutnya …

 

 

Tujuan Training Instalasi Listrik dan Proteksi Listrik

Pemilihan proteksi memegang peranan yang penting agar diperoleh suatu hasil instalasi listrik dengan baik. Pemahaman tentang teknik instalasi listrik dan proteksi listrik sangat diperlukan agar didapatkan hasil yang optimum, aman serta handal bagi pemakai sumber tenaga listrik. Peserta dapat lebih memahami teknik instalasi dan sistem proteksi instalasi listrik tegangan rendah maupun tegangan tinggi serta cara pemeliharaannya.

 

Materi Training Instalasi Listrik dan Proteksi Listrik

  1. Dasar perhitungan listrik
  2. Instalasi
  3. Generator
  4. Transformer
  5. Motor Listrik
  6. Aplikasi lain
  7. Perhitungan arus hubungan pendek
  8. Proteksi : Saklar, Fuse, Relay, Circuit breaker, Lighting arrestor
  9. Koordinasi proteksi
  10. Trouble shooting dan Pemeliharaan

 

Peserta Training Instalasi Listrik dan Proteksi Listrik

  • D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  • Teknisi, Operator dan Supervisor didalam bidang kelistrikan, khususnya pada bidang teknik, maintenance, inspeksi, operasional yang berkaitan dengan jaringan listrik, dll di berbagai macam industri.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.

 

Metode Training Instalasi Listrik dan Proteksi Listrik

Presentasi, diskusi, dan studi kasus

 

Jadwal Training 2019

Hotel Ibis Malioboro, Yogyakarta

  • 09-11 September 2019
  • 16 – 18 September 2019
  • 23 – 25 September 2019
  • 30 September – 02 Oktober 2019
  • 07 – 09 Oktober 2019
  • 14 – 16 Oktober 2019
  • 21 – 23 Oktober 2019
  • 28 – 30 Oktober 2019
  • 04 – 06 November 2019
  • 11 – 13 November 2019
  • 18 – 20 November 2019
  • 25 – 27 November 2019
  • 02 -04 Desember 2019
  • 9 – 11 Desember 2019
  • 16 – 18 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Jadwal Weekend 2019

Hotel Ibis Malioboro, Yogyakarta

  • 14 – 15 September 2019
  • 21 – 22 September 2019
  • 28 – 29 September 2019
  • 05 – 06 Oktober 2019
  • 12 – 13 Oktober 2019
  • 19 – 20 Oktober 2019
  • 26 – 27 Oktober 2019
  • 02 – 03 November 2019
  • 09 – 10 November 2019
  • 16 – 17 November 2019
  • 23 – 24 November 2019
  • 30 November – 01 Desember 2019
  • 07 – 08 Desember 2019
  • 14 – 15 Desember 2019
  • 21 – 22 Desember 2019
  • 28 – 29 Desember 2019

 

Jadwal Training 2020

Hotel Ibis Malioboro, Yogyakarta

  • 6 – 8 Januari 2020
  • 13 – 15 Januari 2020
  • 20 – 22 Januari 2020
  • 27 – 29 Januari 2020
  • 3- 5 Februari 2020
  • 10 – 12 Februari 2020
  • 17 – 19 Februari 2020
  • 26 – 28 Februari 2020
  • 2 – 4 Maret 2020
  • 9 – 11 Maret 2020
  • 16 – 18 Maret 2020
  • 23 – 24 Maret 2020
  • 30 Maret 2020 – 1 April 2020
  • 6 – 8 April 2020
  • 13 – 15 April 2020
  • 20 – 22 April 2020
  • 27 – 29 April 2020
  • 4 – 6 Mei 2020
  • 11 – 13 Mei 2020
  • 2 – 4 Juni 2020
  • 8 – 10 Juni 2020
  • 15 – 17 Juni 2020
  • 22 – 24 Juni 2020
  • 29 Juni 2020 – 1 Juli 2020
  • 6 – 8 Juli 2020
  • 13 – 15 Juli 2020
  • 20 – 22 Juli 2020
  • 27 – 29 Juli 2020
  • 3 – 5 Agustus 2020
  • 10 – 12 Agustus 2020
  • 18 – 19 Agustus 2020
  • 24 – 26 Agustus 2020
  • 31 Agustus 2020 – 2 September 2020
  • 7 – 9 September 2020
  • 14 – 16 September 2020
  • 21 – 23 September 2020
  • 28 – 30 September 2020
  • 5 – 7 Oktober 2020
  • 12 – 14 Oktober 2020
  • 19 – 21 Oktober 2020
  • 26 – 28 Oktober 2020
  • 2 – 4 November 2020
  • 9 – 11 November 2020
  • 16 – 18 November 2020
  • 23 – 25 November 2020
  • 30 November 2020 – 2 Desember 2020
  • 7 – 9 Desember 2020
  • 14 – 16 Desember 2020
  • 21 – 23 Desember 2020
  • 28 – 30 Desember 2020

 

Training Investation & Facilities

  • Rp 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • Jika Perusahaan /Instansi mengirimkan lebih dari satu pesertapada judul dan tanggal yang sama maka akan di berikan potongan harga pada peserta kedua dan seterusnya masing – masing sebesar Rp 1.000.000 per peserta.
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas: Certificate, Training kits, USB, Lunch, Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/ Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

Instruktur Training Instalasi Listrik dan Proteksi Listrik

Tugino, ST.,MT dan Tim

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.

 

Training Teknik Instalasi dan Proteksi Listrik

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
  14. Captcha
 

cforms contact form by delicious:days