Tag Archives: PRODUCTION OPERATION

Oil and Gas Surface Production Operation

ACARA

15 – 16 Oktober 2018 | Rp. 9.500.000 Per Peserta | Yogyakarta/ Semarang/ Solo
15 – 16 Oktober 2018 | Rp.10.500.000 Per Peserta | Bandung/ Jakarta/ Surabaya
15 – 16 Oktober 2018 | Rp. 11.500.000 Per Peserta | Bali/ Batam/ Balikpapan/ Manado/ Lombok
22 – 23 Oktober 2018 | Rp. 9.500.000 Per Peserta | Yogyakarta/ Semarang/ Solo

Jadwal Training 2018 Selanjutnya …

02 – 04 Januari 2019 | Rp 9.500.000,- di Yogyakarta/ Semarang/ Solo
07 – 09 Januari 2019 | Rp 10.500.000,- di Bandung/ Jakarta/ Surabaya

Jadwal Training 2019 Selanjutnya …

 

 

Deskripsi Training Oil and Gas Surface Production Operation

Usaha produksi oil & gas merupakan bisnis yang memerlukan suatu keahlian tersendiri dan spesifik. Sumber daya manusia dan teknologi yang digunakan harus mempunyai kualitas yang baik. Pengetahuan penggunaan teknologi akan mempengaruhi kinerja dalam bisnis ini. Pengetahuan yang menjadi dasar adalah ilmu perminyakan dan prakteknya yang tidak hanya berisi pengenalan mengenai petroleum engineering tetapi mempelajari secara dalam dan fokus pada pendekatan field dan aplikasinya, exercises, masalah-masalah yang ada, serta keselamatan kerja.

Fasilitas surface dalam perusahaan migas juga merupakan salah satu bagian yang menentukan tinggi rendahnya jumlah produksi perusahaan. Sehingga perlu dicermati dari berbagai sisi termasuk di dalamnya penggunaan, perawatan, maupun troubleshooting yang cermat sehingga jika terjadi satu kasus tertentu tidak akan berpengaruh signifikan terhadap perubahan nilai produksi perusahaan.

 

Tujuan Training Oil and Gas Surface Production Operation

Setelah mengikuti training ini diharapkan peserta dapat :

  1. Memahami sifat fisik dan sifat fase crude oil dan natural gas dalam operasi produksi.
  2. Memahami proses perlakuan dan pengkondisian produksi sumur untuk memenuhi permintaan atau produk akhir yang dihasilkan.
  3. Memahami berbagai peralatan yang digunakan untuk proses, treatment, transportasi, dan penyimpanan fluida produksi.
  4. Memahami dasar-dasar pencegahan, minimalisasi hambatan tekan di pipelines, katup, bejana tekan, separator, pompa, kompressor dan peralatan teknis lainnya.
  5. Mengenali proses dan peralatan yang digunakan untuk mengelola acid gas, pengukuran volume dan peralatan material.
  6. Mengenali peralatan yang ditempatkan di bawah tanah, di permukaan, anjungan lepas pantai, ataupun dasar laut.

 

Materi Training Oil and Gas Surface Production Operation

  1. Sifat fluida terproduksi
  2. Sistem keselamatan
  3. Katup, flowlines, manifolds, dan gathering system
  4. Peralatan mekanis: pompa, kompressor, pemanas, bejana tekan, tangki penyimpanan, dan peralatan lain
  5. Field gas separation, compression & field processing, oil & water separation and treatment
  6. Pengukuran fluids dan instrumentasi
  7. Gathering & processing facilities and acid handling
  8. Corrosion control, Hydrate, Paraffin, Asphaltenes, Scale Prevention and Treatment

 

Metode Training Oil and Gas Surface Production Operation

Presentasi, Diskusi, studi kasus.

 

Peserta Training Oil and Gas Surface Production Operation

Peserta yang cocok untuk mengikuti training ini adalah seluruh karyawan perusahaan yang bergerak di bidang oil dan gas serta individu yang ingin memperdalam pengetahuan tentang materi training.

 

Jadwal Training 2018

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 15 – 16 Oktober 2018
  • 22 – 23 Oktober 2018
  • 29 – 30 Oktober 2018
  • 05 – 06 November 2018
  • 12 – 13 November 2018
  • 21 – 22 November 2018
  • 26 – 27 November 2018
  • 03 – 04 Desember 2018
  • 10 – 11 Desember 2018
  • 17 – 18 Desember 2018
  • 26 – 27 Desember 2018

 

Jadwal Training 2019

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 2 –3 Januari 2019
  • 7 – 8 Januari 2019
  • 14 – 15 Januari 2019
  • 21 – 22 Januari 2019
  • 28 – 29 Januari 2019
  • 6 – 7 Februari 2019
  • 11 – 12 Februari 2019
  • 18 – 19 Februari 2019
  • 25 – 26 Februari 2019
  • 4 – 5 Maret 2019
  • 11 – 12 Maret 2019
  • 18 – 19 Maret 2019
  • 25 – 26 Maret 2019
  • 1 – 2 April 2019
  • 8 – 9 April 2019
  • 15 – 16 April 2019
  • 22- 23 April 2019
  • 29 – 30 Mei 2019
  • 6 – 7 Mei 2019
  • 13 – 14 Mei 2019
  • 20 – 21 Mei 2019
  • 27 – 28 Mei 2019
  • 12 – 13 Juni 2019
  • 17 – 18 Juni 2019
  • 24 – 25 Juni 2019
  • 1 – 2 Juli 2019
  • 8 – 9 Juli 2019
  • 15 – 16 Juli 2019
  • 22 -23 Juli 2019
  • 29 – 30 Juli 2019
  • 5 – 6 Agustus 2019
  • 13-14 Agustus 2019
  • 19 – 20 Agustus 2019
  • 26 -27 Agustus 2019
  • 02 – 03 September 2019
  • 09-10 September 2019
  • 16 – 17 September 2019
  • 23 – 24 September 2019
  • 30 September – 01 Oktober 2019
  • 07 – 08 Oktober 2019
  • 14 – 15 Oktober 2019
  • 21 – 22 Oktober 2019
  • 28 – 29 Oktober 2019
  • 04 – 05 November 2019
  • 11 – 12 November 2019
  • 18 – 19 November 2019
  • 25 – 26 November 2019
  • 02 -03 Desember 2019
  • 09 – 10 Desember 2019
  • 16 – 17 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Investasi dan Fasilitas Training Oil and Gas Surface Production Operation

  • 11.500.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 10.500.000 (Non Residential, Belum Terasuk Pajak PPn 10%)) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 9.500.000 (Non Residential, Belum Terasuk Pajak PPn 10%) untuk Lokasi Solo, Semarang atau Yogyakarta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Lead Instruktur Training Oil and Gas Surface Production Operation

Ir. Ketut Gunawan, MT & Tim

Praktisi dan Pengajar dalam bidang pertambangan dan geologi.

 

Oil and Gas Surface Production Operation

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

SURFACE PRODUCTION OPERATION & EQUIPMENT

EVENT

09 – 11 April 2018 | Rp 8.950.000 peserta di Bandung
16 – 18 Mei 2018 | Rp 8.950.000 peserta di Bandung
27 – 29 Juni 2018 | Rp 8.950.000 peserta di Bandung
09 – 11 Juli 2018 | Rp 8.950.000 peserta di Bandung

Jadwal Training 2018 Selanjutnya …




TRAINING OBJECTIVES SURFACE PRODUCTION OPERATION & EQUIPMENT

After completion of this course, the participants will be able and capable to :

  1. Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
  2. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  3. Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  4. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.



TRAINING AUDIENCE/PARTICIPANTS SURFACE PRODUCTION OPERATION & EQUIPMENT

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)


TRAINING MATERIAL OUTLINE SURFACE PRODUCTION OPERATION & EQUIPMENT

1.    Gas Surface Production Operation and Equipments

  • a.    Introduction to Gas Handling and Facilities
  • b.    Gas Properties
    • Ideal gas
    • Real Gas
    • Gas Formation Volume Factor
    • Gas Compressibility
    • Gas-Water System
    • Gas-Condensate System
  • c.    Gas Reservioir Performance
    • Reservoir Gas Flow
    • Gas Reserves
    • Well Completion Effect
    • Tight Gas Well
    • Gas Well Testing
  • d.    Gas Piping System
    • Basic  Flow Equation
    • Flow in Wells and Flow in Pipelines
    • Effect of Liquids
    • Use of Pressure Traverse Curve
    • Liquid Removal from Gas Wells
  • e.    Gas Compression
    • Type of Compressors
    • Compressor Design
    • Centrifugal Compressor
  • f.    Total System Analysis
    • Tubing and Flow Line Effect
    • Separator Pressure Effect
    • Compressor Selection
  • g.    Flow Measuring
    • Orifice Metering
    • Metering System Design
    • Other Metering Methods
  • h.    Gas Condensate Reservoir
    • Well Testing and Sampling
    • Gas Cycling
  • i.    Field Operation Problems
    • Pressure Cumulative Production Plot
    • Hydrate Formation
    • Sour Gas Production
    • Corrosion Control With Inhibitors
    •  Sulfur Deposition
  • j.    Gas Processing
    • Field treatment of Natural Gas
    • Gas Plant Operation
    • Gas Dehydration
    • Gas Sweetening

2.    Oil Surface Production Operation and Equipments

  • a.    Oil Well Surface Production Equipment and Operation
    • Oil Well Equipment
    • Oil Well Production Operation
    • Well Automatic Safety Device
  • b.    Oil Gathering System. Manifold and Flowline
    • Oil Gath ring System
    • Manifold e System
    • Flowline Sizing and Design
  • c.    Crude Oil and Gas Separation
    • Separator and Principle of Separation
    • Design of Separator
    • Oil Dehydration
  • d.    Principles of Measurement
    • Introduction to Measurement
    • Crude Oil Measurement
    • Gas Measurement
  • e.     Well Test
    • Introduction
    • Responsibility for Test
    • Preparation for Test
    • Types of Well Test
    • Equipment and Procedures
    •  Accuracy of Fluid Measurement
    • Problem in Testing
    • Type of Test
  • f.    Artificial Lift Method
    • Gas Lift
    • Submersible Pump
    • Succker Rod Pump
    • Hydraulic Pump

3.    Cases study and discussion



INSTRUKTUR TRAINING SURFACE PRODUCTION OPERATION & EQUIPMENT

Dr.Ir. Sudjati Rachmat, DEA. and Team

Dr.Ir. Sudjati Rachmat, DEA. adalah dosen di jurusan perminyakan ITB sejak tahun 1979 sampai sekarang. Beliau alumnus dari ITB lulus tahun 1977, kemudian melanjutkan pendidikannya di Diplome d’Etude Approfondie Ecole Centrale de Lyon, UCB Lyon I, FRANCE. Dan pada tahun 1985 – 1987 beliau mengambil program Docteur en Mecanique de Fluide (Methode Numerique) Ecole Centrale de Lyon, UCB Lyon I, FRANCE.

Dr. Sudjati Rachmat sering menjadi instruktur dalam banyak pelatihan yang berkaitan dengan perminyakan untuk perusahaan di seluruh Indonesia, diantaranya seperti Pertamina, Chevron, Badak LNG, Total, Vico, Mobil Oil Indonesia, Ministery of Mining and Energy, Unocal Indonesia, Lemigas, IATMI-IWPL Migas, PPTM Migas, PT Caltex Pacific Indonesia, Gulf, Arco, dll.

Topik-topik training yang Beliau sampaikan diantaranya adalah production surface and down hole equipment, Basic Reservoir Engineering, Sucker Rod Pumping Theory and Practice, Production Logging Engineering, Nodal Analysis and Production Optimization, Well Test, Operation and Interpretation, Well Design, Completion and Workover, Numerical and Statistical Method for Petroleum Engineering Problems, Oil-Well Stimulation, Hydraulic Fracturing, Statistics for Petroleum Engineering, Reservoir Simulation for Enhanced Oil Recovery, Applied Reservoir Engineering and Reservoir Simulation, Aspects of Horizontal Well Technology, Geology and Geophysics Modeling, Advanced Programming on Numerical Analysis and Industrial Information System, Management Information System, Well Stimulation of Oil and Gas Reservoir, Horizontal Well Technology, Transportation of Oil and Gas, Sand Control Technology, dan lain-lain.

Beliau banyak melakukan penelitian di bidang MIGAS dan telah mempublikasikan dan menseminarkannya di forum dunia.



TRAINING VENUE SURFACE PRODUCTION OPERATION & EQUIPMENT

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

DURASI TRAINING :  

4 hari

 

JADWAL TRAINING

  1. 09 Apr 2018-11 Apr 2018
  2. 16 May 2018-18 May 2018
  3. 27 Jun 2018-29 Jun 2018
  4. 09 Jul 2018-11 Jul 2018
  5. 13 Aug 2018-15 Aug 2018
  6. 10 Sep 2018-12 Sep 2018
  7. 17 Oct 2018-19 Oct 2018
  8. 12 Nov 2018-14 Nov 2018
  9. 12 Dec 2018-14 Dec 2018

 

INVESTATION PRICE/PERSON :

  1. Rp. 8.950.000/person (full fare) or
  2. Rp. 8.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 8.500.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

SURFACE PRODUCTION OPERATION & EQUIPMENT

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Basic Oil Gas Production Operations – HALF CONFIRMED

ACARA

25 – 27 April 2017 | Rp 7.500.000 di Hotel Horison Ultima Riss, Yogyakarta

 

DESKRIPSI & TUJUAN TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

The overall aim of the program is to make the participants understand the various aspects Oil & Gas Industries and will be able to improve delegates’ knowledge of:

  • Understand Oil & Gas Operation from Exploration until Production
  • Better Performing of their Job
  • Having better coordination with other  Department/Function
  • The origins of oil and gas
  • The process of exploring for hydrocarbons
  • How governments control the exploitation  of hydrocarbons
  • The terminology and language of the business
  • The process of drilling for oil and gas.
  • The process of producing petroleum

MATERI TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

  1. The Origins of Oil & Gas
    • The formation of petroleum
    • Different kinds of reservoirs
    • Reservoir characteristics
  2. World Energy Demand & Supply
    • Petroleum reserves
    • Classification of reserves
  3. Products from Petroleum
    • Refining
    • Petrochemicals
    • Hydrocarbon pricing
  4. Control of Petroleum Exploitation
    • Ownership of reserves
    • The control and award of petroleum concessions
    • Unitisation
    • Production Sharing Agreements
  5. The Reservoir Life Cycle
    • Exploration
    • Appraisal
    • Development
    • Production
    • Abandonment
  6. Petroleum Economics
    • How exploration, appraisal and development decisions are made
  7. Drilling
    • Drilling a well
    • Drilling time depth/cost curve
    • Drilling equipment
    • The mud system
    • Casing and tubing
    • Cementing
    • Directional drilling
    • Side-tracking
    • Dual completions
    • Multilateral and horizontal wells
  8. Production
    • Reservoir drive mechanisms
    • Artificial lift systems
    • Well treatment and work over – fracturing, sand control, acidizing
    • Surface treatment – separation, compression
    • Storage and transportation
  9. Maintenance Activities
    • Different kinds of maintenance – reliability, condition based, planned, breakdown
  10. Logistics
    • Materials management and warehousing
    • Air and marine transportation
  11. Crude Storage
    • On Shore & Off Shore
  12. Finance
  13. Support Function

INSTRUKTUR TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

Ir. Nursuhartono, MT and Team

METODE TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:

  1. Presentation
  2. Discuss
  3. Case Study
  4. Evaluation

PESERTA TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

  • Finance personnel
  • Human resource professionals
  • Information systems specialists
  • Secretaries, administrative and technical support staff,
  • New Hire Engineer & Managers,
  • HR personnel,
  • Procurement / Logistic personnel,
  • Staff and Senior staff at all business functions

WAKTU & TEMPAT TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

  • 25 – 27 April 2017
  •  Pukul 08.30 – 16.00 WIB

Hotel Horison Ultima Riss Yogyakarta

 Request for Training Venue: Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

In House Training Depend on request

INVESTASI TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

Course Fee : Rp. 7.500.000,-/participant (non residential)

FASILITAS TRAINING BASIC OIL GAS PRODUCTION OPERATIONS

  1. Training Hand Out
  2. Digital Material
  3. Certificate
  4. Exclusive Souvenir
  5. Qualified Bag
  6. Training Photo
  7. Training room with full AC facilities and multimedia
  8. Once lunch and twice coffee break every day of training
  9. Qualified Instructor
  10. Transportation from airport / railway to hotel and from hotel to the training venue (2 person from one company)

Basic Oil Gas Production Operations

 

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PRODUCTION OPERATION AND PROBLEM SOLVING

Acara

17 – 20 November 2015 | IDR 9.750.000,-/Person di Jakarta
01 – 04 Desember 2015 | IDR 9.750.000,-/Person di Bandung / Yogyakarta

 

COURSE TARGETS :

After completing this course participants are expected to be able to:

  • Comprehend basic principles of calculation and conduct optimization when wells production operations, oil wells, gas and geothermal reservoir implemented, develop this production optimization implementation to improve wells and fields performance and production.
  • Conduct simple diagnosis and comprehend settlement problems on production wells operation of, oil wells and gas and geothermal reservoir.
  • Create a simple analysis of wells oil, gas and geothermal data, forecast performance and plan production operations development
  • Conduct simple quantitative calculations entire acquisition data: tubing, flowline, chokes, perforation, Gravel-pack, sub-surface safety, wells valve, plan its development by considering capability from each well.
  • Practice knowledge of production operations for settlement problems occur when cementation process, handling scale, sand, corrosion and damage of oil and gas wells.n
  • Understanding basic principles on design: cementation, workover, wells stimulation with acidizig and hydraulics rupture, planning workover, etc.

 

PRE-REQUISITE:

Backgrounds: Operator, Senior Operator, Engineer/Non Engineer

 

OUTLINE COURSE PRODUCTION OPERATION AND PROBLEM SOLVING

Geologic Considerations in producing Operation

  • Introduction
  • Sandstone Reservoirs
  • Geologic Factors Affecting Reservoir Properties in Sandstone
  • Application of Geologic concepts in Specific Sandstone
  • Carbonate Reservoirs
  • Application of Geologic Concepts in Carbonate Reservoirs

Reservoir Considerations in Well Completions

  • Introduction
  • Hydrocarbon Properties of Oil and Gas
  • Recommendations of Obtaining Good Test Data
  • “Eyeball” Interpretation of Pressure Charts

Primary Cementing

  • Introduction
  • Cementing Materials
  • Cement Additives
  • Cement Bonding
  • Flow Properties of Primary Cements
  • Displacement Mechanics
  • Cost of Primary Cementing
  • Special Problem Situations-New Developments
  • Primary Cementing Practices

Well Completion Design

  • Factors Influencing Well Completion Design
  • Conventional Tubular Configuration
  • Unconventional Tubular Configurations
  • Sizing Production Tubular
  • Completion Interval
  • Permanent Well Completions (PWC)
  • Tubingless Completion

Tubing Strings,Packers,Subsurface Control Equipment

  • Tubing Strings
  • Steel Grades
  • Tubing Connections
  • Makeup of API Threaded connection
  • Design of Tubing Strings
  • High Strength Tubing
  • Physical Properties of Steel
  • Sensitivities of High Strength Tubing
  • Tubing Inspection
  • Tubing Handling Practices
  • Equipment for Use With-Strength Tubing
  • Tubing Running Practices
  • API Publication List
  • Packers and Subsurface Control Equipment
  • Production Packers
  • Subsurface Control Equipment

Perforating Oil and Gas Wells

  • Introduction
  • Types of Perforators
  • Evaluation of Perforator Performance
  • Factors  Aftecting Gun Perforating Results
  • Perforating in a Clean Fluid with Differential Pressure Into Wellbore
  • A Comparison between the GEO-VANN System and Other Perforating Methods in Wells Equipped with Packers

Completion and Workover Fluids

  • Functions-Requirements-Selection Criteria
  • Formation Damage Related to Solids
  • Oil Fluids-Practical Application
  • Conventional Water-Base Mud
  • Oil Base or Invert-Emulsion Muds
  • Foam
  • Perforating Fluids
  • Packer Fluids
  • Well Killing

Through-Tubing Production Logging

  • Introduction
  • Logging Device
  • Application of Through-Tubing Production logging
  • Field Examples of Production Logging Techniques
  • Primary Cement Evaluation

Problem Well Analysis

  • Problem Wells
  • Problem Well Analysis Checklist

Parafin and Asphaltene

  • Introduction
  • Paraffin and Asphaltene Chemistry
  • Deposition Mechanisms
  • Removal of Wax Deposits
  • Preventing or Decreasing Wax Deposition
  • Design of Wax Control

Squeeze Cementing-Remedial Cementing

  • Introduction
  • Theoretical Considerations
  • Practical Considerations
  • Special Squeeze Cementing Situations
  • Planning a Squeeze Cement Job
  • Normal Operational Procedures
  • Other Operational Procedures
  • Plug-Back Operations
  • Special Cement Systems

Sand Control

  • Introduction
  • Reduction of Drag Force
  • Mechanical Methods of Sand Control
  • Practical Considerations in Gravel Packing
  • Use of screen Without Gravel
  • Resin Consolidation Methods

Formation Damage

  • Introduction
  • Basic Causes of Damage
  • Classification of Damage Mechanisms
  • Reduced Absolute Permeability
  • Increased Fluid Viscosity (Emulsion)
  • Diagnosis of Formation Damage

Surfactants for Well Treatments

  • Characteristics of Surfactants
  • Use and Action of Surfactant
  • Formation Damage Susceptible to Surfactant Treatment
  • Preventing or Removing Damage
  • Well Stimulation With Surfactants
  • Increasing Effectiveness of Rod Pumping
  • Prevention of Well Damage

Acidizing

  • Acids Used in Well Stimulation
  • Acid Additives
  • Carbonate Acidizing
  • Acidizing Techniques for Caronat Formations
  • Sandstone Acidizing
  • Potential Safety Hazard in Acidizing

Hydraulic Fracturing

  • Introduction
  • Mechanics of Fracturing
  • Production Increase from Fracturing
  • Propping the Fracture
  • Frac Fluids
  • Frac Job Design
  • Frac Job Evaluation Techniques

Scale Deposition,Removal,and Prevention

  • Introduction
  • Causes of Scale Deposition
  • Prediction and Identification of Scale
  • Scale Removal
  • Scale Prevention

Corrosion Control

  • The Corrosion Process
  • Detection and Measurement of Corrosion
  • Corrosion Control

Workover and Completion Rigs Workover System

  • Conventional Production Rigs
  • Non-Conventional Workovers System
  • Concentric Tubing Workovers

Workover Planning

  • Reasons for Workover
  • Workover to Alleviate Formation Damage
  • Workover for Low Permeability Well
  • Workover of Wells in Partially Pressure-Depleted Reservoirs
  • Workover to Reduces Water Production in Oil and Gas Wells
  • Workover to Reduces Gas Production in Oil Wells
  • Workover for Sand Control
  • Workover to Repair Mechanical Failure
  • Workover to Change Zones or Reservoirs
  • Workover to Multicomplete
  • Workover to Increase Production in Well Producing High Viscosity (Low Gravity) Oil
  • Workover Economics


Course Leader:

Dr. Ir. Sudjati Rachmat, DEA graduated from Petroleum Engineering Department of ITB in 1979 and got his Doctorate Degree with honored in 1987 from Ecole Centrale de Lyon I, France . The topic of his thesis is Modelisation Numerique d’Ecoulements Polyphasiques en Milieux Poreux Application au Cas de Calcul des Champs de Pressions et de Saturations dans un Gisement de Petrole.

For the time being, he became a lecturer in Petroleum Engineering Department of ITB. His subjects are Analysis and Numerical Method, Engineering Mathematics, Computer Simulation, Flu id Mechanic, Artificial Intelligence for Petroleum Engineering.

He also gave many courses to the community, such as: basic reservoir engineering and reservoir simulation, basic production engineering, down hole well testing, statistic and numerical method for petroleum engineering, basic log interpretation, etc. He is a member of some profession organization such as: IATMI, SPE/EIME, IMA, HAIAI, FPS-USA, INAGA, and IGA.

 

General Information

Certificate of Appreciation

All attendees will receive a certificate of appreciation attesting to their participant in the training. This certificate will be providing in exchange for a completed training questionnaire.

Documentation & Dress Code

  • Quality training material kits will be on registration, additional papers, & handouts assignment by Our Partner.
  • Note-taking by participants is encourage. However, to ensure free and open discussions, no formal records will be kept.
  • Casual clothing is recommended. The training atmosphere is informal.

Facilities

  • Quality training material (hardcopy and softcopy)
  • Quality training kits included T-shirt or jacket, cap, ect.
  • Interactive presentation with discussion
  • Lunch per day
  • Morning and afternoon coffee / tea breaks for along the training
  • Certificate of Completion
  • Exclusive flash disk.

**) Optional

Tuition Fee & Registration  Deadline

  • IDR 9.750.000,-/Person
  • Registration deadline a weeks before training held.

Minimum Participant

This training will be conducted if we receive registration letter from 3 (three) participants (Minimum)

PRODUCTION OPERATION AND PROBLEM SOLVING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Advanced Production Operations For Oil & Gas

Event

04 – 06 Maret 2015 | Rp. 9.000.000 di Hotel Merapi Merbabu, Yogyakarta
08 – 10 April 2015 | Rp. 9.000.000 di Hotel Merapi Merbabu, Yogyakarta
04 – 06 Mei 2015 | Rp. 9.000.000 di Hotel Merapi Merbabu, Yogyakarta
03 – 05 Juni 2015 | Rp. 9.000.000 di Hotel Merapi Merbabu, Yogyakarta

Jadwal Training 2015 Selanjutnya …



ABSTRACK

The rapidly increasing worldwide demand for natural gas as an energy source requires expertise in gas engineering technology. Incorporating a balance between theory and application, course emphasis is on training participants for immediate application of acquired techniques to field problems.
Production is defined as the operations involved in bringing well fluids to the surface and preparing the fluids for transport to a refinery via pipelines or trucks. The first step in production is to start the well fluids flowing to the surface (called “well completion”). Well servicing and workover consists of performing routine maintenance operations (such replacing worn or malfunctioning equipment) and performing more extensive repairs, respectively. Well servicing and workover are an intermittent step and necessary to maintain the flow of oil and gas. Next, the fluid must be separated into its components of oil, gas, and water; stored; and treated (for purification), measured, and tested before being transported to the refinery.
This training will provide the principle and yet some practical and theoretical aspect that can be applied on daily work faced by production engineers and supervisor in the oil industry.



OBJECTIVE

All aspects of completions are covered in sufficient detail to permit participants to review his/her current practices The fundamental concepts of production operations and their proper application in the field Production equipment such as wellhead, tubing and packers, well completions and workover as well as well test and problems, production logging and cementing will also covered Production logs and how and when to use them; evaluation techniques for cement bond logs and pulse echo tools

  • Learn how to plan and implement well completions, workovers, stimulation treatments, and routine production operations with an efficiency that increases profits
  • Learn about the role of rock mechanics in completions, stimulation, and workovers
  • Be able to give suggest or discover the procedures and techniques that increase production and cut operating costs
  • Be Able to identify and implement production improvement opportunities that can be carried out by either rig or non-rig well interventions
  • Implementation of appropriate technology, either from internal or external sources, in well design, whilst ensuring that the well value is maximized



OUTLINE TRAINING ADVANCE PRODUCTION OPERATION

1. GEOLOGICAL CONSIDERATION

  • Formation Rock
  • Primary and Secondary Migrations
  • Reservoir Traps

2. RESERVOIR FUNDAMENTALS THEORY

  • The Nature of Rocks and Fluids
  • Porosity and Permeability
  • Productivity Index
  • Volumetric Calculation
  • Other Calculations and Decline Curves

3. FLUID FLOW

  • Well Productivity
  • Choke and Reservoir Fluids
  • Inflow and Outflow

4. PRODUCTION OPERATIONS

  • Well head and Well Head EquipmentMultiple Orifice
  • Routine Operations
  • Opening and Shut-in Well Procedure

5. WELL TESTING AND SATELLITE SYSTEM

  • Test Separator Operations and Equipments
  • Gas Systems Instruments
  • Flare System and Depressurizing
  • Pigging Techniques and ProceduresSampling and Analysis
  • BS & W and API Gravity Measurement
  • Protective Steam Tracing

6. SURFACE PRODUCTION OPERATIONS

  • Process, Level, Temperature and Pressure Controls
  • Oil treating , Heater treater and Dehydrator
  • Separators, Stage Separators and Sizing
  • Two-phase and Three-phase Separation Skimmer tank and Flotation unit

7. WELL PROBLEMS

  • Low Production and Formation Damage
  • Low Reservoir
  • Plug-in Tubing or Perforations
  • High Viscosity
  • High Back Pressure
  • Inadequate Artificial Lift
  • Water Production and Mechanical Problem
  • Protective Steam Tracing

8. PRODUCTION LOGS

9. WELL COMPLETIONS

10. PRIMARY CEMENTING AND SQUEEZE CEMENTING

11. FLUID COMPLETIONS

12. SAND CONTROL

  • Gravel Pack, Resin and Fraspac

13. WORKOVERS

14. PARAFFIN AND ASPHALTENES

  • hemical analysis
  • Precipitation Mechanism
  • The wax and Paraffin Problems

15. OIL EMULSIONS

  • Emulsion Built-up and Emulsifying Agent
  • Sampling and Analysis
  • Emulsion Treating
  • Heat and Chemical Treatment
  • Electrostatic Coalescing

16. SCALE PROBLEMS

  • Scale Composition, Prediction and Identification
  • Mechanic and Chemical methods
  • Scale Prevention and Inhibitors

17. CORROSION PREVENTIONS

  • Basic Theory
  • Detection and Measurement
  • Prevention and Material Used
  • Coating and Chemicals
  • Cathodic Protections and inhibitors

INSTRUCTOR

Dr.Ir. KRT. Nursuhascaryo, MSc

  PARTICIPANT

  • Production, Operations, Facilities and Senior Petroleum Engineers
  • Surface Equipment Technicians, Technical or Reservoir Engineers
  • Supervisory Personnel who interact with field facility engineers/operators
  • Production Managers and Field Production Supervisors
  • Engineers and other personnel involved with the daily operation and management of producing oil and gas wells.

TIME AND VENUE

  • Hotel Merapi Merbabu Yogyakarta
  • 12-14 Jan, 2-4 Feb, 4-6 Mar, 8-10 Aprl, 4-6 Mei, 3-5 Jun, 1-3 Jul, 12-14 Agst, 7-9 Sept, 7-9 Okt, 4-6 Nov, 7-9 Des 2015
  • Pukul : 08.00 – 16.00 WIB



TUTION FEE

Biaya Rp. 9.000.000 per peserta (Non Residential)


FACILITIES
Training Modules, Training Kit, Certificate, Exclusive Souvenir, Dinner & City Tour, Coffee Break & Lunch

Advanced Production Operations For Oil & Gas

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

SURFACE PRODUCTION OPERATION & EQUIPMENT

ACARA

20 – 23  May  2014 | Rp 7.200.000,-/person di Bali / Yogyakarta / Bandung
3 – 5  June  2014 | Rp 7.200.000,-/person di Bali / Yogyakarta / Bandung
24 – 27  June  2014 | Rp 7.200.000,-/person di Bali / Yogyakarta / Bandung

 

COURSE DESCRIPTION SURFACE PRODUCTION OPERATION & MAINTENANCE

          Describes the process for the gathering system, fluid treatment, transportation, measurements and storage. Natural gas and oil physics characteristics are exposed as well as and their effect on separation, treatment and measurements. The participant will learn through exercises how to design and operates the surface facilities production equipments and process

COURSE OBJECTIVESURFACE PRODUCTION OPERATION & MAINTENANCE

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

COURSE OUTLINE SURFACE PRODUCTION OPERATION & MAINTENANCE

Gas Surface Production Operation and Equipments

  •  Introduction to Gas Handling and  Facilities
  • Gas Properties
  •  Gas Reservioir Performance
  • Gas Piping System
  •  Gas Compression
  •  Total System Analysis
  •  Flow Measuring
  •  Gas Condensate Reservoir
  • Field Operation Problems
  •  Gas Processing

Oil Surface Production Operation and Equipments

  • Oil Well Surface Production Equipment and Operation
  •  Oil Gathering System. Manifold and Flowline
  •  Crude Oil and Gas Separation
  •  Principles of Measurement
  •  Artificial Lift Method

COURSE  SCHEDULE SURFACE PRODUCTION OPERATION & MAINTENANCE

BALI / YOGYAKARTA / BANDUNG

  • 20 – 23  May  2014
  • 3 – 5  June  2014
  • 24 – 27  June  2014

Promo Rate SURFACE PRODUCTION OPERATION & MAINTENANCE

  • Rp 7.200.000,- / person++non- residentiaL ++
  • Rp 8.500.000,- / person ++ residentiaL ++

SURFACE PRODUCTION OPERATION & EQUIPMENT

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Surface Production System & Facility

EVENT

02 – 05 Desember 2013 | Rp 5.800.000 at Jogjakarta Plaza Hotel, Yogyakarta

 

TRAINING OBJECTIVES Surface Production System & Facility

  • Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
  • Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
  • Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
  • Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

 

TRAINING AUDIENCE Surface Production System & Facility

Operator/Sr. Operator/Engineer or Non Engineer

 

COURSE OUTLINE Surface Production System & Facility

Gas Surface Production Operation and Equipments

  • Introduction to Gas Handling and Facilities
  • Gas Properties
    • Ideal gas
    • Real Gas
    • Gas Formation Volume Factor
    •  Gas Compressibility
    • Gas-Water System
    • Gas-Condensate System
  • Gas Reservioir Performance
    • Reservoir Gas Flow
    • Gas Reserves
    • Well Completion Effect
    • Tight Gas Well
    • Gas Well Testing
  • Gas Piping System
    • Basic Flow Equation
    • Flow in Wells and Flow in Pipelines
    • Effect of Liquids
    • Use of Pressure Traverse Curve
    • Liquid Removal from Gas Wells
  • Gas Compression
    • Type of Compressors
    • Compressor Design
    • Centrifugal Compressor
  • Total System Analysis
    • Tubing and Flow Line Effect
    • Separator Pressure Effect
    • Compressor Selection
  • Flow Measuring
    • Orifice Metering
    • Metering System Design
    • Other Metering Methods
  • Gas Condensate Reservoir
    • Well Testing and Sampling
    • Gas Cycling
  • Field Operation Problems
    • Pressure Cumulative Production Plot
    • Hydrate Formation
    •  Sour Gas Production
    • Corrosion Control With Inhibitors
    • Sulfur Deposition
  • Gas Processing
    • Field treatment of Natural Gas
    • Gas Plant Operation
    • Gas Dehydration
    • Gas Sweetening

Oil Surface Production Operation and Equipments

  • Oil Well Surface Production Equipment and Operation
    • Oil Well Equipment
    • Oil Well Production Operation
    • Well Automatic Safety Device
  • Oil Gathering System. Manifold and Flowline
    • Oil Gath ring System
    •  Manifold e System
    • Flowline Sizing and Design
  • Crude Oil and Gas Separation
    • Separator and Principle of Separation
    • Design of Separator
    •  Oil Dehydration
  • Principles of Measurement
    •  Introduction to Measurement
    • Crude Oil Measurement
    • Gas Measurement
  • Well Test
    • Introduction
    • Responsibility for Test
    • Preparation for Test
    • Types of Well Test
    • Equipment and Procedures
    • Accuracy of Fluid Measurement
    • Problem in Testing
    • Type of Test
  • Artificial Lift Method
    •  Gas Lift
    • Submersible Pump
    • Succker Rod Pump
  • Hydraulic Pump

TRAINING PARTICIPANT Surface Production System & Facility

Individu yang ingin memulai bisnis/usaha atau karyawan yang akan menghadapi masa pensiun.

Training Instructor Surface Production System & Facility

Dr. Ir. Drs. Herianto, MSc. & Team

 

TRAINING METHOD Surface Production System & Facility

Presentation, Discussion, Case Study, Evaluation

 

TRAINING DATE & PLACE Surface Production System & Facility

  • 2 – 5 Desember 2013
  • (Melia Purosani Hotel Yogyakarta)

 

TRAINING FEE

  • Rp5.800.000/ Participant/ Non residential
  • (Kuota minimal 3 orang peserta)

FACILITIES

Training Kit, Handout, Certificate, Lunch, 2 X Coffee Break, Souvenir

Surface Production System & Facility

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Logistic To Support Drilling and Production Operation

EVENT

5 – 6 September 2013 | Rp. 3,500,000 at  Hotel grand serela,  Bandung

 

 

Training Overview Logistic To Support Drilling and Production Operation

Four major topics will be discussed during the five days course i. e: Drilling Operations, Well Completions, Production Operations, Materials clearance and warehouse. After finishing the course, participant will understand the Drilling Operations, Well completion, Production operations, Material Clearance and Warehousing. By heaving the above knowledge participants will be able to support the drilling and Operations properly as a major activity in the Oil Industry.

Topik Training Logistic To Support Drilling and Production Operation

  • Petroleum Introduction
  • Drilling Operations : Hoisting System, Rotating, Power system, BOP and Instrumentation & Cementing
  • Well Completion
  • Productions Operations
  • Material Clearence and Warehousing
  • General : Logistic function as an element of support for operations, Organization in logistical management & Principles of logistical implementation ( 7 right principles )
  • Procurement
  • Standardization / Technical special
  • Material Identification System
  • Inventory Management : EOQ, Safety Stock
  • Ware house Management ( Functions, Delivery And Maintenance)
  • Transportation


Mereka yang perlu mengikuti training Logistic To Support Drilling and Production Operation ini

  • Drilling engineers, Production engineers, chief of Logistic, staff of logistic, etc.

Facilitator

  • I Team instructur have experiences in HSE more than 15 years
  • Holding HSE professional certificate local and international
  • Instructur come from academic and proffesional background

Tanggal dan Tempat Training Logistic To Support Drilling and Production Operation

  •  Hotel grand serela,  Bandung  | 5-6 September 2013

Investasi Training Logistic To Support Drilling and Production Operation

  • Rp. 3,500,000
  • Buku Analisis Laporan Keuangan, Souvenir, Flash disk, materi hand-out dan CD modul, 2x coffee break, makan siang dan sertifika

 

Logistic To Support Drilling and Production Operation

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days