Tag Archives: Flow Diagram

System Dynamics Dengan STELLA

ACARA

01 – 03 Oktober 2018 | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta
08 – 10 Oktober 2018 | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta
15 – 17 Oktober 2018 | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

02 – 04 Januari 2019 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
07 – 09 Januari 2019 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2019 Selanjutnya …

 

 

Deskripsi Training System Dynamics dengan STELLA

Pemodelan system dinamis adalah metodologi untuk mempelajari simulasi sistem yang kompleks, biasanya digunakan ketika model analitis resmi tidak ada, atau sulit untuk diterapkan. Penggunaan system dinamik diarahkan kepada bagaimana memahami perilaku system tersebut sehingga dapat meningkatkan efektivitas dalam merencanakan suatu kebijakan dan pemecahan masalah yang timbul. Training ini akan membahas mengenai dasar-dasar system dinamis simulasi system dinamis.

 

Materi Training System Dynamics dengan STELLA

  1. Complex system & system thinking:
    • Pengenalan
    • Proses yang diperlukan untuk mempelajari system dynamics
    • Tantangan yang dihadapi dalam mempelajari system dynamics
    • Hal-hal yang diperlukan untuk berhasil mempelajari system dynamics
    • Peran penting simulasi dalam system dynamics
  2. Aplikasi system dynamics:
  3. Proses pemodelan:
    • Tujuan menggunakan model
    • Langkah-langkah pemodelan
    • Overview dari proses pemodelan
  4. Struktur dan perilaku complex system
    • Modus dasar dari dinamika perilaku sistem
    • Interaksi antar modus dasar dari dinamika perilaku sistem
    • Modus lain dari dinamika perilaku sistem
  5. Conceptual Model:
    • Sub system diagram
    • Boundary chart diagram
  6. Causal Loop Diagram (CLD):
    • Notasi dalam CLD
    • Prinsip membangun CLD
    • Praktek membangun CLD
  7. Flow Diagram:
    • Stocks, Flow dan akumulasi
    • Mengidentikasi stock dan flow
    • Menterjemahkan CLD kedalam Flow Diagram
  8. Tools untuk memodelkan dinamika perilaku sistem:
    • Delays
    • Coflows
    • Modeling Decission Making
  9. Praktek
    • Membangun CLD & model dasar dengan powersim
    • Membangun model lanjutan dengan powersim
    • Membangun model alternatif dan simulasi
  10. Validasi dan pengujian model:
    1. Boundary adequacy test
    2. Structure assessment test
    3. Dimensional consistency
    4. Parameter assessment
    5. Extreme condition test
  11. Simulasi dan analisis kebijakan

 

Metode Training System Dynamics dengan STELLA

Presentasi, Study Kasus, Diskusi.

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training 2019

Hotel Ibis Malioboro, Yogykarta

  • 2 – 4 Januari 2019
  • 7 – 9 Januari 2019
  • 14 – 16 Januari 2019
  • 21 – 23 Januari 2019
  • 28 – 30 Januari 2019
  • 6 – 8 Februari 2019
  • 11 – 13 Februari 2019
  • 18 – 20 Februari 2019
  • 25 – 27 Februari 2019
  • 4 – 6 Maret 2019
  • 11 – 13 Maret 2019
  • 18 – 20 Maret 2019
  • 25 – 27 Maret 2019
  • 1 – 2 April 2019
  • 8 – 10 April 2019
  • 15 – 17 April 2019
  • 22- 24 April 2019
  • 29 – 30 Mei 2019
  • 6 – 8 Mei 2019
  • 13 – 15 Mei 2019
  • 20 – 22 Mei 2019
  • 27 – 29 Mei 2019
  • 10 – 12 Juni 2019
  • 17 – 19 Juni 2019
  • 24 – 26 Juni 2019
  • 1 – 3 Juli 2019
  • 8 – 10 Juli 2019
  • 15 – 17 Juli 2019
  • 22 -24 Juli 2019
  • 29 – 31 Juli 2019
  • 5 – 7 Agustus 2019
  • 13-15 Agustus 2019
  • 19 – 21 Agustus 2019
  • 26 -28 Agustus 2019
  • 02 – 04 September 2019
  • 09-11 September 2019
  • 16 – 18 September 2019
  • 23 – 25 September 2019
  • 30 September – 02 Oktober 2019
  • 07 – 09 Oktober 2019
  • 14 – 16 Oktober 2019
  • 21 – 23 Oktober 2019
  • 28 – 30 Oktober 2019
  • 04 – 06 November 2019
  • 11 – 13 November 2019
  • 18 – 20 November 2019
  • 25 – 27 November 2019
  • 02 -04 Desember 2019
  • 9 – 11 Desember 2019
  • 16 – 18 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

Investasi dan Fasilitas Training System Dynamics dengan STELLA

  • 6.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Lead Instruktur Training System Dynamics dengan STELLA

Joko Sulistio, ST.,M.Sc

System Dynamics Dengan STELLA

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

EVENT

01 – 04 Maret 2016 | Fee: at Proposal at Bandung
02 – 05 Agustus 2016 | Fee: at Proposal at Bandung
04 – 07 Oktober 2016 | Fee: at Proposal at Bandung

 

Training Description Oil & Gas Surface Production Operations and Facility

The job of a production facility is to separate the well stream into three components, typically called ‘phases’ (gas, oil, and water), and process these phases into some marketable product or dispose of them in an environmentally acceptable manner. Water often flows into a well along with oil and gas. All these fluids are collected by surface equipment for separation into gas, oil, and water fractions for storage and distribution. The water, which contains salt and other minerals, is usually injected into formations that are well separated from freshwater aquifers close to the surface. In many cases it is put back into the formation from which it came. At times, produced water forms an emulsion with the oil or a solid hydrate compound with the gas. In those cases, specially designed treaters are used to separate the three components. The clean crude oil is sent to storage at near atmospheric pressure. Natural gas is usually piped directly to a central processing plant (called a gasoline plant), where the remaining liquids (LOGs) are removed before it is fed to the consumer pipeline.
Therefore, The facility must provide well testing and measurement so that gas, oil, and water can be properly allocated to each well. To separate the well stream into three components as mention above, engineer must known well about separator. Separator will utilize the force of gravity to separate gas and oil mixtures. Therefore, separator is one of crucial surface facility. Other than separator, there are many other surface facility that crucial for oil and gas production.

However, while tending to this facility, some problem must be arising. The problem is circulating around pressure cumulative production, hydrate formation, sour gas production, corrosion, and sulfur deposition. Hence, we need to know how to solve this problem and also how to maintain surface facility so that the oil production will proceed well. This practical approach course is designed to provide a comprehensive understanding of Surface Production Facility, Process, Operation and Maintenance. It will be presented in order to fulfill the needs of all technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance, you should participate in this course.

COURSE CONTENT Oil & Gas Surface Production Operations and Facility

  • Surface Production Processing and Flow Diagram
  • Production Separators, Flowlines, Heater-Treater and Storage Tanks
  • Gas Gathering & Compression
  • Gas Processing and Sour Gas Treating
  • Gas Pipeline Problems and Troubleshooting

Active participation is encouraged through case studies and examples. It is possible to tailor for specific goal, upon request. The training will be delivered in the form of classroom exposition, case studies and open discussion.

Who Will You Meet ?
All technical and non-technical (field and headquartered) personnel of Oil & Gas Company who involves in or concern with onshore or offshore Oil & Gas Surface Production Facility, Process, Operation and Maintenance.
What Will You Get After Completing This Course Oil & Gas Surface Production Operations and Facility? After completion, participants will:
Understand why oil & gas must be processed in near well surface production facility, how the process is carried out, what equipment and components are needed, how each equipment works, and what are the goals to be achieved in each stage, in both technical and economical point of views.
Better classify requirements for each separation process and specification of vessels, columns, piping, valves, pump, compressor and related devices used in surface operations and improve knowledge on safety, inspection, maintenance and troubleshooting of the whole system.

INSTRUCTOR Oil & Gas Surface Production Operations and Facility

In this comprehensive course, you will be assisted by a compatible Instructor, Hilman Ahmad, IR. DCE , He is an an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Bandung Industrial Oil & Gas Education Center. He has been practicing production operation and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of Technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000. He has been delivering training course in production operation and maintenance and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

OIL & GAS SURFACE PRODUCTION OPERATIONS AND FACILITY

 

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days