Wastewater Treatment & Disposal
Acara
16 – 18 Oktober 2013 | 08:00-16:00 WIB | Rp 6.000,000,-/peserta (Non resindential) di Yogyakarta
Description
Satisfactory disposal of wastewater, whether by surface, subsurface methods or dilution, is dependent on its treatment prior to disposal. Adequate treatment is necessary to prevent contamination of receiving waters to a degree which might interfere with their best or intended use, whether it be for water supply, recreation, or any other required purpose.
Wastewater treatment consists of applying known technology to improve or upgrade the quality of a wastewater. Usually wastewater treatment will involve collecting the wastewater in a central, segregated location (the Wastewater Treatment Plant) and subjecting the wastewater to various treatment processes. Most often, since large volumes of wastewater are involved, treatment processes are carried out on continuously flowing wastewaters (continuous flow or “open” systems) rather than as “batch” or a series of periodic treatment processes in which treatment is carried out on parcels or “batches” of wastewaters. While most wastewater treatment processes are continuous flow, certain operations, such as vacuum filtration, involving as it does storage of sludge, the addition of chemicals, filtration and removal or disposal of the treated sludge, are routinely handled as periodic batch operations.
Wastewater treatment, however, can also be organized or categorized by the nature of the treatment process operation being used; for example, physical, chemical or biological. Examples of these treatment steps are shown below. A complete treatment system may consist of the application of a number of physical, chemical and biological processes to the wastewater.
Tujuan training :
After completing Wastewater Treatment& Disposal, students will be equipped with a basic understanding of the following:
- How to identify the various forms of biological growth
- Available disinfectant technologies
- Measurement and monitoring systems
- Feeding systems and requirements
- Environmental and safety concerns associated
- How to implement a robust control plan
Outline Training Wastewater Treatment & Disposal :
- Introduction to Wastewater Treatment
- Solids Storage and Transport
- Wastewater Treatment Methods
- Physical
- Chemical
- Biological
- Conditioning
- Thickening
- Dewatering
- Stabilization
- Thermal Processing
- Disposal method of Wastewater
- Process Residuals
- Types of Process Residuals
- . Design Considerations and Criteria
- Residuals Handling Considerations
Who Should Attend
This training is intended for workers in the department of K3 and or executor / process engineer at a wastewater treatment operator or WWTP
Instruktur :
Riyanto, S.Pd., M.Si., Ph.D.
Course Method
- Presentation
- Discuss
- Case Study
- Simulation
- Evaluation
Waktu dan Tempat Pelaksanaan :
- Batch 4: 16-18 Oktober 2013
- Yogyakarta
Fee:
Rp 6.000.000,- /participant (non residensial)*
Special Rate
Rp 5.000.000,- (min 5 participants from the same company:
Fasilitas Training Wastewater Treatment & Disposal
- Module / Handout
- Sertifikat
- Training Kit
- Coffe Break & Lunch
- Souvenir
Waste Water Treating & Disposal