Tag Archives: Power System

ETAP: ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP

Acara

25 – 28 Juni 2018 | Rp 7.950.000/ person di Bandung
23 – 26 Juli 2018 | Rp 7.950.000/ person di Bandung
13 – 16 Agustus 2018 | Rp 7.950.000/ person di Bandung
24 – 27 September 2018 | Rp 7.950.000/ person di Bandung

Jadwal Selanjutnya …

 

 

TRAINING OBJECTIVES  ETAP 

Pelatihan ini bertujuan meningkatkan penbgetahuan dan wawasan mengenai analisa system tenaga. Untuk mensimulasikan hasil Analisa digunakan software Aplikasi ETAP. Pelatihan ditekankan pada analisa pada jaringan tenaga listrik Tegangan menengah hingga tegangan rendah yang meliputi Studi Aliran daya, Analisa Hubung singkat, Analisa Transien dan Harmonisa sehingga setelah mengikuti pelatihan peserta akan dapat :

  • Meningkatkan pengetahuan dan wawasan mengenai kondisi operasi Sistem Tenaga
  • Melakukan analisa Aliran Daya menggunakan ETAP
  • Melakukan Analisa Hubung Singkat menggunakan ETAP
  • Melakukan Analisa Motor Starting menggunakan ETAP
  • Melakukan Analisa Transient menggunakan ETAP
  • Melakukan Studi Harmonisa dan menentukan ukuran Filter

 

TRAINING MATERIAL OUTLINE ETAP

  1. Electric power grid representation and characteristic. (System overview, Elements of Electrical Power System, per-unit System)
  2. Building One-Line Diagram Using ETAP . (Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)
  3. Load Flow Calculation Methods. (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)
  4. Load Flow Study Using ETAP . (Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)
  5. Fault Calculation Methods. (Impedance Methode, Symetrical Component Methode)
  6. Short-Circuit Analysis. (Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)
  7. Motor Starting Analysis. (Motor Starting Methods, Motor Starting Calculation)
  8. Motor Starting Analysis Using ETAP . (Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)
  9. Transient Stability Anaysis. (Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)
  10. Transient Stability Anaysis Using ETAP . (Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)
  11. Harmonic Analysis. (Definition, Harmonic Parameters, Harmonic Sources)
  12. Harmonic Analysis Using ETAP . (Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)

 

WHO SHOULD ATTEND THIS TRAINING  ETAP 

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

 

TRAINING INSTRUCTOR

Ir. Hasan Surya, MT. and Team

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

 

VENUE TRAINING ETAP

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)

 

TRAINING DURATION

4 days

 

TRAINING TIME 

  1. 25 Jun 2018-28 Jun 2018
  2. 23 Jul 2018-26 Jul 2018
  3. 13 Aug 2018-16 Aug 2018
  4. 24 Sep 2018-27 Sep 2018
  5. 23 Oct 2018-26 Oct 2018
  6. 26 Nov 2018-29 Nov 2018
  7. 03 Dec 2018-06 Dec 2018

 

INVESTATION PRICE/ PERSON : 

  •  Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructorPractice session
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

RECOMMENDATION TO PARTICIPANTS :

Participants are recommended to bring laptop for practice sessions

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ELECTRICAL POWER SYSTEM ANALYSIS AND PROTECTION

Acara

04 – 07 Juni 2018 | Rp 7.950.000/person di Yogyakarta
16 – 19 Juli 2018 | Rp 7.950.000/person di Yogyakarta
13 – 06 Agustus 2018 | Rp 7.950.000/person di Yogyakarta
17 – 20 September2018 | Rp 7.950.000/person di Yogyakarta

Jadwal Selanjutnya …

 

 

OBJECTIVES ELECTRICAL POWER SYSTEM TRAINING

The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem. In this 5-day course the participant will:

  • Learn and get better understanding of electric power system operation and condition
  • Learn and better understanding the types of electric power configuration
  • Be able to calculate basic calculation of electric power system
  • Be able to analyze disturbance
  • Learn and better understanding of monitoring system and control
  • Learn and better understanding effect of load in power system



MATERI TRAINING ELECTRICAL POWER SYSTEM:

  1. Electric power grid representation and characteristic.
  2. Type of electric power system configuration and characteristic.
  3. Load shedding system and load analysis.
  4. Basic calculation in normal condition.
  5. Basic calculation in disturbance condition and disturbance analysis.
  6. Electrical power system monitoring equipment and selection.
  7. Electrical Protection Practice and Basic Technology (Protective Gear. Reliability, Selectivity ,Speed, Stability and Sensitivity ,Circuit quantities & conventions , Fault calculations)
  8. Fundamental protection concepts:  time-inverse , differential , directional impedance, etc
  9. Static Relays
  10. Circuits using analogue techniques , Digital techniques , Output and Tripping circuits ,   Electrical Interference , Future trends
  11. Relay input sources:      VTs, CTs, CVTs,  CCVTs,  optical voltage and   current transducers.
  12. Bus Protection,
  13. Capacitor bank protection.
  14. Line protection : directional comparison,  blocking,   unblocking,  transfer trip, etc
    System stability, reclosing, and load shedding
  15. Protection Schemes and substation design diagrams
  16. Generator protection
  17. Motor protection
  18.  Transformer protection
  19. Differential protection
  20. Industrial Power System Protection
  21. Installation, testing and maintenance of protection systems



SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?

Beberapa kategori para profesional yang dapat mengikuti kursus :

  1. Supervisor / Superintendent, Teknisi dan Power Plant Maintenance, Operator dan Electric didalam bidang  kelistrikan utamanya yang berkaitan dengan operasi, maintenance dan inspeksi peralatan industri yang berkaitan dengan sistem proteksi listrik.
  2. Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
  3. Seluruh pihak yang ingin memahami topik ini

 
INSTRUCTOR

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon, PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.



VENUE 

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)



TRAINING DURATION 

4 hari

TRAINING TIME

  1. 04 Jun 2018-07 Jun 2018
  2. 16 Jul 2018-19 Jul 2018
  3. 13 Aug 2018-16 Aug 2018
  4. 17 Sep 2018-20 Sep 2018
  5. 02 Oct 2018-05 Oct 2018
  6. 19 Nov 2018-22 Nov 2018
  7. 04 Dec 2018-07 Dec 2018

 

INVESTATION PRICE/PERSON 

  • Rp 7.950.000/person (full fare)  or
  • Rp 7.750.000/person (early bird, payment 1 week before training)  or
  • Rp 7.500.000/person (if there are 3 or more participants from the same company)


FACILITIES FOR PARTICIPANTS

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

ELECTRICAL POWER SYSTEM ANALYSIS AND PROTECTION

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

POWER DISTRIBUTION SYSTEM: OPERATION, CHARACTERISTIC, PROTECTION & RELAYING

ACARA

05 – 07 Juni 2018 | Rp 6.000.000,- di Yogyakarta
03 – 05 Juli 2018 | Rp 6.000.000,- di Yogyakarta
28 – 30 Agustus 2018 | Rp 6.000.000,- di Yogyakarta
18 – 20 September 2018 | Rp 6.000.000,- di Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI TRAINING POWER DISTRIBUTION SYSTEM

“Your Power Distribution System is your backbone”. Istilah ini sering atau mungkin pernah kita dengar sebelumnya. Sayangnya , masih banyak prinsip yang diterapkan  “jika tidak rusak, tidak perlu memperbaikinya”, akibatnya banyak perusahaan, khususnya pada departemen pemeliharaan, rutin membuat perbaikan darurat dengan biaya yang berlebihan, dan mungkin perusahaan Anda juga pernah atau sedang berada dalam situasi seperti ini. Diperlukan adanya prosedur-prosedur efeketif untuk menangani hal ini.
Yang menjadi perhatian lagi, proteksi pada Power Distribution System juga menjadi hal yang penting dan memerlukan pemahaman khusus berkaitan dengan system faults (kesalahan-kesalahan sistem), pendeteksian yang efektif, dan sistem keamanan. Pelatihan ini menyajikan gambaran menyeluruh dan sistematis tentang konsep dan prinsip-prinsip operasi, karakteristik, dan aplikasi skema perlindungan untuk berbagai elemen sistem tenaga listrik, dimulai dengan gambaran kesalahan daya sistem, perhitungan hubungan singkat (short circuit calculations), komponen skema proteksi sistem tenaga listrik, serta sesi penuh pada relay berbasis mikroprosesor dan aplikasi mereka.

 

TUJUAN TRAINING POWER DISTRIBUTION SYSTEM

Setelah selesai mengikuti pelatihan ini, diharapkan akan memberikan pengetahuan dan pemahaman kepada peserta tentang prinsip kerja sistem dan peralatan yang berkaitan dengan distribusi dan keselamatan, dimana prinsip koordinasi dalam sistem control dan sistem proteksi dan evaluasi menggunakan sistem koordinasi dan digital sistem koordinasi relay dengan perhitungan arus hubung singkat secara manual maupun melalui software EDSA.

MATERI TRAINING POWER DISTRIBUTION SYSTEM

  • Gambaran Umum: Komponen Tenaga Listrik dan Fungsinya
  • Karakteristik Beban: Klasifikasi Beban.
  • Protection of electrical distribution system.
  • Jaringan Distribusi.
  • Bentuk Jaringan
  • Level Tegangan
  • Pembebanan Regulasi
  • Grounding System
  • Transformator Distribusi: Tipe-Tipe Transformator
  • Lightning & Transformer Protection
  • Generator & Motor Protections
  • Components of Power System Protection Schemes
  • Co-ordination of Electrical Protection Systems
  • Feeder Overcurrent Protection
  • Pengaturan Tegangan.
  • Tegangan Spread
  • Tegangan Utilisasi
  • Tegangan Zone
  • Feeder-Feeder
  • Metode Peningkatan tegangan.
  • Metode Peningkatan Tegangan dan Faktor Daya.
  • Aplikasi Kapasitor Pada Sistem Distribusi
  • Karakteristik Operasi Sistem Distribusi: Karateristik Arus & Tegangan Sistem Distribusi
  • Fenomena Harmonik pada Sistem Distribusi: Harmonik pd Sistem Berbeban Non Linier
  • Short Circuit Theory
  • Fault Studies
  • Power System Faults
  • Symmetrical and unsymmetrical fault.
  • Short circuit capability.
  • Selection and setting relay coordination.
  • High voltage testing, relay setting and fault simulation using Power System Simulator (PSS) equipment.
  • Short circuit calculation using Electrical Distribution & Transmission System Analysis (EDSA).

 

PESERTA TRAINING POWER DISTRIBUTION SYSTEM

Pelatihan ini disarankan untuk diikuti oleh:

  • Para Teknisi & Operator, min pendidikan SLTA/D3 dengan pengalaman kerja 3 tahun, yang terlibat dalam manajemen kelistrikan
  • Pihak lain yang dalam tugasnya memerlukan dan terkait dengan materi pelatihan.

 

METODE TRAINING POWER DISTRIBUTION SYSTEM

  • Presentation
  • Discussion/Sharing
  • Case Study
  • Evaluation
  • Simulation

 

INSTRUKTUR TRAINING POWER DISTRIBUTION SYSTEM

  • Tugino, S.T., M.T.
  • Janny F. Abidin, S.T., M.T.

(Praktisi Electrical Engineering)

 

WAKTU & TEMPAT TRAINING CONTRACT DRAFTING AND MANAGEMENT

  • Batch 6: 05 – 07 Juni 2018
  • Batch 7: 03 – 05 Juli 2018
  • Batch 8: 28 – 30 Agustus 2018
  • Batch 9: 18 – 20 September 2018
  • Batch 10: 09 – 11 Oktober 2018
  • Batch 11: 27 – 29 November 2018
  • Batch 12: 04 – 06 Desember 2018
  • 08.00 – 16.00 WIB

Ibis Malioboro Hotel Yogyakarta ; Jambuluwuk Malioboro Hotel Yogyakarta ; Horizon Hotel Yogyakarta ; Phoenix Hotel Yogyakarta

In House Training : Depend on request



BIAYA TRAINING POWER DISTRIBUTION SYSTEM

Rp 6.000.000,- /participant (non residensial)

FASILITAS TRAINING POWER DISTRIBUTION SYSTEM

  • Meeting Room di Hotel
  • Module/Materi (hard & soft copy)
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

POWER DISTRIBUTION SYSTEM: OPERATION, CHARACTERISTIC, PROTECTION & RELAYING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Marine/ Offshore High Voltage Maintenance

ACARA

12 – 14 Maret 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
19 – 21 Maret 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
26 – 28 Maret 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
02 – 04 April 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

DESKRIPSI MARINE/ OFFSHORE HIGH VOLTAGE MAINTENANCE

High voltage training course participants learn how to manage risk and develop safe working practices .At the end of the course the participants will be aware of the risks of working with high voltage equipment on board, the dangers of electrical hazards, how to avoid them and how to minimize the consequences of electrical accidents.

COURSE OUTLINE MARINE/ OFFSHORE HIGH VOLTAGE MAINTENANCE

  1. Basics knowledge of electrical
  2. Electrical power systems
  3. Electrical power system protections
  4. Switchgear origin and types
  5. Safe working procedures
  6. Protective devices
  7. Assignment of qualified personnel to carry out maintenance and repairs
  8. High voltage electrical equipment testing methods
  9. Performing test of insulation resistance and polarization index
  10. High voltage equipment maintenance
  11. Taking remedial actions necessary during faults
  12. Carrying out a switching and isolation procedure on marine high voltage safety documentation

DETAILED TEACHING SYLLABUS Learning objectives:

  1. Basics knowledge of electrical – (1h)
    – general concept of IMO, SOLAS, ISM, STCW
  2. Electrical power systems – (1h)
    – the necessity for high voltage industrial plant
  3. Protection of electrical power system – (2h)
    – generators, motors, transformers, distribution switchboards, circuit breakers, protection relays, drives
  4. Switchgear origin and types – (3h)
    – explanation of definitions used with high voltage systems
  5. Safe working procedures – (3h)
    – basic steps to be taken for issue of a permit to work
  6. Protective devices – (2h)
    – function and principle of operation
  7. High voltage electrical equipment testing methods – (2h)
    – introduction with high voltage testing equipment (primary injection, secondary injection, conductance test, electrical pressure test, insulation
    – resistance test, function test)
  8. Transformer testing – (1h)
    – introduction with transormer testing methods (open circuit test, short circuit test)
  9. High voltage equipment maintenance – (1h)
    – introduction with high voltage equipment types of maintenance (fault, post fault and preventive maintenance)
    – assignment of qualified personnel to carry out maintenance and repairs)
  10. Work on simulator – (4h)
    – reading and understanding of schematics and practical application on training center simulator (carrying out a switching and isloation procedure on marine high voltage safety documentation)
    – taking remedial action necessary during faults
    – SF6 and vacuum breakers operating principles

COURSE SCHEDULE MARINE/ OFFSHORE HIGH VOLTAGE MAINTENANCE

  1. International requisites for high voltage knowledge (1h classroom)
  2. Advantages of high voltage systems (1h classroom)
  3. Hazards (1h classroom)
  4. High voltage equipment on board (2h classroom)
  5. High voltage safety rules (3h classroom)
  6. Safe working procedures (2h classroom – 1h practical)
  7. Protective devices (1h classroom-1h practical)
  8. High voltage electrical equipment testing methods (1h classroom – 1h practical)
  9. Transformer testing (1h classroom)
  10. High voltage equipment maintenance (1h classroom)
  11. Work on simulator (1h classroom-3h practical)

Total number of course lessons will be 21 hours (15 hours classroom and 6h practical).

PESERTA TRAINING MARINE/ OFFSHORE HIGH VOLTAGE MAINTENANCE

Operator, teknisi, engineer, perancang, penyelia, manajer, dan lain-lainnya yang berhubungan dengan kegiatan pengendalian yang memanfaatkan piranti-piranti instrumentasi.

Metode MARINE/ OFFSHORE HIGH VOLTAGE MAINTENANCE

Presentasi, Diskusi , Brainstorming, Case Study

 

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

Investasi dan Fasilitas

  • 6.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Lead Instruktur

Mursid Sabdullah ST MT and Team

Marine/ Offshore High Voltage Maintenance

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

ACARA

20 – 22 Maret 2018 | Rp 6.000.000 di Yogyakarta
24 – 26 April 2018 | Rp 6.000.000 di Yogyakarta
22 – 24 Mei 2018 | Rp 6.000.000 di Yogyakarta
26 – 28 Juni 2018 | Rp 6.000.000 di Yogyakarta

Jadwal Selanjutnya …


 

DESKRIPSI TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

Energi listrik merupakan energi yang sangat vital dalam  operasional perusahaan. Hampir semua peralatan dan sumber penerangan  yang digunakan berasal dari energi listrik. Namun dalam pemakaiannya  banyak dikeluhkan adanya ketidak-efisiensian energi listrik ini. Hal ini terbukti dari membengkaknya tagihan listrik yang harus dibayarkan perbulannya.  Terlebih apabila ini terjadi dilingkungan kantor atau perusahaan maka akan mengakibatkan anggaran biaya yang cukup besar.

Tingkat efisiensi pemakaian listrik di pengaruhi oleh daya listrik yang terpasang, aktivitas yang dilakukan,jenis peralatan yang terpasang dan rata-rata pemakaian listrik perhari/per bulan. Untuk mengefisiensikan pemakaian listrik, maka perlu dilakukan manajemen energi listrik dimana dengan cara tersebut akan didapatkan pengunaan energi listrik pada suatu bangunan, mengetahui kondisi peralatan yang terpasang dan mengetahui peluang untuk penghematan energi. Keberhasilan program efisiensi pemakain energi listrik, selain dipengaruhi oleh faktor teknis juga sangat bergantung pada komitmen manajemen puncak dan komitmen seluruh karyawan dalam gerakan efisiensi.

Berbagai tantangan yang dihadapi industri saat ini tidak hanya berkaitan dalam hal memproduksi dan memasarkan produk, untuk dapat mempertahankan produksinya sesuai dengan target yang dicanangkan tetapi sangat perlu didukung oleh suplai energi listrik yang baik dan pengelolaannya yang benar. Dengan demikian dirasa perlu untuk memberikan pembelajaran terhadap sumber daya yang dimiliki perusahaan untuk dapat mengetahui, memahami bagaimana cara cara yang harus dilakukan dalam sistem manajemen energi.

Pelatihan ini ditujukan buat para teknisi dan engineer dari bermacam industri yang dalam kesehariannya bertanggung jawab atas operasionalisasi sistem manajemen energi untuk menjamin keberlangsungan supplai energi.

 

TUJUAN TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

Pelatihan ini dimaksudkan untuk memberikan bekal pengatahuan dan kahlian manajemen energi kepada Sumber Daya Manusia (SDM) yang bertugas pada pengelolaan energi agar dapat memahami prinsip-prinsip penerapan penghematan energi di industri mereka, mampu mengenali potensi-potensi penghematan energi di industri, serta mampu membuat langkah-langkah program audit dan penghematan energi di perusahaan masing-masing.

Setelah selesai mengikuti kursus ini, peserta diharapkan akan mengerti dan memahami masalah sistem tenaga listrik yang mampu menjamin kelancaran kegiatan produksi dengan handal, bermutu tinggi dan ekonomis, terutama pada managemen listrik pada sisi beban. Seperti bagaimana manajemen beban dapat menyediakan listrik yang cukup disaat dibutuhkan dan bagaimana peralatan dapat berjalan dengan tingkat konsumsi listrik yang minimum.

 

MATERI TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

Materi yang akan disampaikan dalam pelatihan audit energy ini yaitu:

  • Pengantar tentang Manajemen Energi
  • Konsep dan definisi manajemen energi
  • Keuntungan pemanfaatan energi dan implikasinya terhadap bisnis
  • Audit energy : kunci manajemen energi yang efektif
  • Identifikasi potensi penghematan energi
  • Konsep efisiensi untuk beberapa unit peralatan
  • Sistem Informasi dan Monitoring Energi (SIME)
    • Konsep SIME
    • Komponen dasar SIME
    • SIME pada bangunan komersial
  • Manajemen Energi pada Setiap Pengkondisian Udara
  • Sistem Pengkodisian udara dan sistem pengendaliannya
  • Kriteria desain
  • Teknologi dan manajemen pengendalian energi
  • Manajemen Energi pada Sistem Penerangan
  • Isu efisiensi energi lampu penerangan
  • Jenis lampu
  • Metode desain
  • Check list penerangan
  • Manajemen Energi pada Sistem Motor Listrik
  • Pengertian dan definisi efesiensi motor
  • Penghematan melalui High Efficiency Motor (HEMs)
  • Penghematan biaya dengan Varieble Speed Drives (VSDs)
  • Peluang Variable Speed Drives (VSDs)
  • Audit Energy
  • Metodologi audit energy
  • Perhitungan peluang penghematan energi
  • Studi Kasus & Diskusi

 

PESERTA TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

Pelatihan Audit Energy ini sesuai untuk diikuti oleh:

  • Para Teknisi, Operator dan Supervisor yang memiliki basic skills dan familiar dengan sistem manajemen energi.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.

 

METODE TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

  • Lecture
  • Discussion
  • Simulation
  • Animation
  • Video
  • Software
  • Virtual Laboratory

 

INSTRUKTUR TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

Tugino, S.T., M.T. & Team

(Praktisi Electrical Engineering)

 

 

WAKTU & TEMPAT:

  • Batch 2 : 14 – 16 Februari 2017
  • Batch 3: 20 – 22 Maret 2018
  • Batch4: 24 – 26 April 2018
  • Batch 5: 22 – 24 Mei 2018
  • Batch 6: 26 – 28 Juni 2018
  • Batch 7: 24 – 26 Juli 2018
  • Batch 8: 14 – 16 Agustus 2018
  • Batch 9: 12 – 14 September 2018
  • Batch 10: 02 – 04 Oktober 2018
  • Batch 11: 21 – 23 November 2018
  • Batch 12: 27 – 29 Desember 2018

08.00 – 16.00 WIB

Ibis Malioboro Hotel Yogyakarta ; Ibis Styles Hotel Yogyakarta ; Horison Hotel Yogyakarta

In House Training : Depend on request

 

BIAYA TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

  • Rp 6.000.000,- /participant (non residensial)*
  • Special Rate: Rp 5.500.000,- (min 3 participants from the same company)

 

FASILITAS TRAINING AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

  • Meeting Room di Hotel
  • Module/Materi (hard & soft copy)
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

 

 AUDIT ENERGY AND POWER SYSTEM MANAGEMENT

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

POWER SYSTEM TRANSIENT AND PROTECTIONS

ACARA

26 – 28 Februari 2018 | Rp 5.900.000,- per peserta di Hotel Ibis, Yogyakarta
05 – 07 Maret 2018 | Rp 5.900.000,- per peserta di Hotel Ibis, Yogyakarta
12 – 14 Maret 2018 | Rp 5.900.000,- per peserta di Hotel Ibis, Yogyakarta
19 – 21 Maret 2018 | Rp 5.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

COURSE OBJECTIVE POWER SYSTEM TRANSIENT AND PROTECTIONS

Reliability of electrical energy systems to a large extent is a consequence of the reliability of it’s protection system. Basic building blocks of the protection system are fuses, over current and distance relays and differential protection schemes. In this course, we will introduce their principles and applications to apparatus and system protection. Technology of relaying  has changed significantly  in  last century. The first generations of relays were electromechanical devices. The second generation  involved solid state  relays. The present generations of numerical relays are realized by digital signal processing. In this course, we will also introduce both theory  and practice  of the numerical relays.The course can be used as  a first course  in power system protection. It should be also useful to graduate students, practicing engineers as well as the research community.

 

COURSE BENEFIT POWER SYSTEM TRANSIENT AND PROTECTIONS

  • To develop an understanding of how surges and electrical transients originate and propagate throughout a power system.
  • To develop the capability to understand the nature and calculation of such surges and transients.
  • To be able to understand transients issues related to power system apparatus and overvoltage protection schemes for acceptable system operation w.r.t. insulation performance

COURSE OUTLINE POWER SYSTEM TRANSIENT AND PROTECTIONS

  1. Fundamental Notions about Electrical Transients
  2. Simple Switching Transients and Damping
  3. Transient Solutions by Laplace Transform and by Deduction
  4. Transmission Line Equations and Traveling Waves
  5. Behavior of Traveling Waves at Junctions – Surge Impedance Terminations
  6. Behavior of Traveling Waves at Junctions – Complex Terminations and Bifurcation
  7. Lattice (Bewley) Diagrams
  8. Attenuation and Distortion of Traveling Waves
  9. Transients on Practical Power Systems
  10. Fundamental principles of fuse and over current protection and application to feeder and motor protection.
  11. Fundamental principles of distance relaying  and application to transmission system protection.
  12. Fundamental principles of differential protection and application to transformer, bus bar and generator armature winding protection.
  13. Role of Current and Voltage transformers in power system protection.
  14. Relay co-ordination in transmission and distribution system.
  15. Introduction  to  Numerical  relaying.  DSP fundamentals  like  aliasing,  sampling  theorem, Discrete Fourier Transform and application to current and voltage phasor estimation.
  16. Numerical relaying algorithms for over current, distance and differential protection  with application to transmission system, transformer and bus bar protection

COURSE PARTICIPANTS POWER SYSTEM TRANSIENT AND PROTECTIONS

The course is designed for the power systems’ engineers responsible for the operation, control and protection of distribution, transmission and generation systems. It is also targeting consulting and manufacturing engineers, engineers in industrial plants, etc.

 

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

INVESTASI DAN FASILITAS POWER SYSTEM TRANSIENT AND PROTECTIONS

  • 5.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR POWER SYSTEM TRANSIENT AND PROTECTIONS

Mursid Sabdullah ST MT  and Team

 

POWER SYSTEM TRANSIENT AND PROTECTIONS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ELECTRICAL POWER SYSTEM ANALYSIS

ACARA

20 – 22 Februari 2018 | Rp 6.000.000 di Yogyakarta
20 – 22 Maret 2018 | Rp 6.000.000 di Yogyakarta
24 – 26 April 2018 | Rp 6.000.000 di Yogyakarta
15 – 17 Mei 2018 | Rp 6.000.000 di Yogyakarta

Jadwal Training 2018 Selanjutnya …



TRAINING OVERVIEW ELECTRICAL POWER SYSTEM ANALYSIS

A Power System is predominantly in steady state operation or in a state that could with sufficient accuracy be regarded as steady state. In a power system there are always small load changes, switching actions, and other transients occurring so that in a strict mathematical sense most of the variables are varying with the time. However, these variations are most of the time so small that an algebraic, i.e. not time varying model of the power system is justified.
The purpose of this course is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion, and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem.



TRAINING OBJECTIVES ELECTRICAL POWER SYSTEM ANALYSIS

  • Power System Analysis means verifying the adequacy of the power distribution system and it’s components.
  • Recognize coordination related disturbances and outages.
  • Collect the required data to perform a detailed coordination study.
  • Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC requirements



TRAINING CONTENTS ELECTRICAL POWER SYSTEM ANALYSIS

  • Introduction to Industrial Power Systems
  • Short Circuit Theory and Terminology
  • Effects of Short Circuits
  • Fault Current Sources
  • Machine Reactances
  • Fault Current Characteristics
  • Electrical Equipment Ratings
  • Fuses
  • Circuit Breakers
  • Motor Starters
  • Conductors and Bus
  • Balanced Fault Calculations
  • Coordination Fundamentals
  • Procedures
  • Data Collection
  • Scaling Factors
  • Plotting Time/Current Curves
  • Circuit Breakers
  • Fuses
  • Time Delay/Instantaneous Relays
  • Relay Coordination Intervals
  •   Equipment Protection and Coordination
  • NEC and ANSI/IEEE Criteria
  • Conductors (Low and Medium Voltage)
  • Transformers
  • Motors e. Conductors (Low and Medium)



WHO SHOULD ATTEND

This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power system.



TRAINING METHODS ELECTRICAL POWER SYSTEM ANALYSIS

  • Presentation
  • Discussion
  • Practice
  • Case Study
  • Evaluation



INSTRUCTOR
ELECTRICAL POWER SYSTEM ANALYSIS

Tugino, S.T., M.T. & Team
(expert in Electrical Power System Analysis and Instrumentation)

 

TIME & VENUE TRAINING ELECTRICAL POWER SYSTEM ANALYSIS

  • Batch 2: 20 – 22 Februari 2018
  • Batch 3: 20 – 22 Maret 2018
  • Batch4: 24 – 26 April 2018
  • Batch 5: 15 – 17 Mei 2018
  • Batch 6: 26 – 28 Juni 2018
  • Batch 7: 24 – 26 Juli 2018
  • Batch 8: 14 – 16 Agustus 2018
  • Batch 9: 12 – 14 September 2018
  • Batch 10: 02 – 04 Oktober 2018
  • Batch 11: 21 – 23 November 2018
  • Batch 12: 27 – 29 Desember 2018
  • 08.00 am – 16.00 pm (WIB)
  • Ibis Malioboro Hotel Yogyakarta ; Jambuluwuk Malioboro Hotel Yogyakarta ; Horizon Hotel Yogyakarta ; Phoenix Hotel Yogyakarta

In House Training : Depend on request



TUITION FEE TRAINING ELECTRICAL POWER SYSTEM ANALYSIS

6.000.000 IDR /participant (non residensial)*

Special Rate:

5.500.000 IDR (min 4 participants from the same company)



FACILITIES TRAINING ELECTRICAL POWER SYSTEM ANALYSIS

  • Meeting Room at Hotel
  • Module/Materi (hard & soft copy)
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training



ELECTRICAL POWER SYSTEM ANALYSIS

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ETAP: ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP – Confirmed

Acara

18 – 20 Desember 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
27 – 29 Desember 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018

02 – 04 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta – CONFIRMED
08 – 10 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
15 – 17 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta – CONFIRMED

Jadwal Training 2018 Selanjutnya …

 

 

 

Tujuan Training Electrical Power System Analysis Using ETAP

Pelatihan ini ditujukan untuk ahli listrik, operator sistem, Engineering untuk memperkenalkan dasar – dasar Transmisi dan Distribusi menggunakan ETAP. Pelatihan ini memberikan keterampilan, pengetahuan, dan teknik yang diperlukan untuk menjadi ahli dalam ETAP untuk melakukan permodelan analisis.

 

Materi Training Electrical Power System Analysis Using ETAP

  1. Building One-Line Diagram Using ETAP. (Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)
  2. Load Flow Calculation Methods. (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)
  3. Load Flow Study Using ETAP. (Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)
  4. Fault Calculation Methods. (Impedance Methode, Symetrical Component Methode)
  5. Short-Circuit Analysis. (Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)
  6. Motor Starting Analysis. (Motor Starting Methods, Motor Starting Calculation)
  7. Motor Starting Analysis Using ETAP. (Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)
  8. Transient Stability Anaysis. (Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)
  9. Transient Stability Anaysis Using ETAP. (Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)
  10. Harmonic Analysis. (Definition, Harmonic Parameters, Harmonic Sources)
  11. Harmonic Analysis Using ETAP. (Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)
  12. Case and Study

 

 Peserta Training Electrical Power System Analysis Using ETAP

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

 

Metode  Training Electrical Power System Analysis Using ETAP

Presentasi, diskusi, studi kasus

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 02 – 04 Januari 2018
  • 08 – 10 Januari 2018
  • 15 – 17 Januari 2018
  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018


Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

Instruktur Training Electrical Power System Analysis Using ETAP

Tugino , ST,MT &Tim

 

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP – Confirmed

ACARA

28 – 29 Agustus 2017  | Rp. 6.900.000 Per Peserta di Yogyakarta /Semarang / Solo
28 – 29 Agustus 2017 | Rp. 7.900.000 Per Peserta di Bandung / Jakarta / Surabaya
28 – 29 Agustus 2017 | Rp. 8.900.000 Per Peserta di Bali / Batam /Balikpapan / Manado / Lombok

04 – 05 September 2017 | Rp. 8.900.000 Per Peserta di Hotel Santika, Bali – CONFIRMED
25 – 26 September 2017 | Rp. 7.400.000 Per Peserta di Hotel Santika, Surabaya – CONFIRMED

Jadwal Training 2017 Selanjutnya …

 

Deskripsi Training Electrical Power System Analysis Using ETAP

Pelatihan ini ditujukan untuk ahli listrik, operator sistem, Engineering untuk memperkenalkan dasar – dasar Transmisi dan Distribusi menggunakan ETAP. Pelatihan ini memberikan keterampilan, pengetahuan, dan teknik yang diperlukan untuk menjadi ahli dalam ETAP untuk melakukan permodelan analisis.

Tujuan Training Electrical Power System Analysis Using ETAP

Pelatihan ini bertujuan memberikan keterampilan, pengetahuan yang menyeluruh tentang ETAP dan teknik analisis untuk memecahkan berbagai masalah dalam pratek.

 

 

Materi Training Electrical Power System Analysis Using ETAP

  1. Building One-Line Diagram Using ETAP. (Add Elements, Select & Deselect Elements, Element and Connector Colors, Relocate Elements, Cut, Copy, & Paste, Size, Symbol, & Orientation, Protective Devices, Nodes & Buses, Group & Ungroup, Composite Networks)
  2. Load Flow Calculation Methods. (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)
  3. Load Flow Study Using ETAP. (Load Flow Toolbar, Load Flow Study Case Editor, Load Flow Display Options, Load Flow Calculation Methods, Load Flow Required Data, Load Flow Output Reports)
  4. Fault Calculation Methods. (Impedance Methode, Symetrical Component Methode)
  5. Short-Circuit Analysis. (Short-Circuit Toolbar, Short-Circuit Study Case Editor, Short-Circuit Display Options, Short-Circuit Required Data, Short-Circuit Output Reports)
  6. Motor Starting Analysis. (Motor Starting Methods, Motor Starting Calculation)
  7. Motor Starting Analysis Using ETAP. (Motor Starting Toolbar, Motor Starting Study Case Editor, Info Page, Model Page, Time Event Pages, Add Action by Starting Category, Add Action by Load, Motor Starting Display Options, Motor Starting Calculation Methods, Motor Starting Required Data, Motor Starting Output Reports, Motor Starting Time Slider Toolbar)
  8. Transient Stability Anaysis. (Purpose for Performing Transient Stability Study, Power System Stability Definition, Stability Limits)
  9. Transient Stability Anaysis Using ETAP. (Transient Stability Toolbar, Transient Stability Study Case Editor, Info Page, Events Page, Dyn Model Page, Transient Stability Plots, Transient Stability Required Data, Transient Stability Output Reports, Transient Stability Time Slider Toolbar)
  10. Harmonic Analysis. (Definition, Harmonic Parameters, Harmonic Sources)
  11. Harmonic Analysis Using ETAP. (Harmonic Analysis Toolbar, Harmonic Analysis Study Case Editor, Harmonic Analysis Display Options, Harmonic Analysis Calculation Methods, Harmonic Analysis Required Data, Harmonic Analysis Output Reports, Harmonic Analysis Order-Slider, Harmonic Analysis Frequency-Slider)
  12. Case and Study

 

Peserta  Training Electrical Power System Analysis Using ETAP

Para Operator, Teknisi, Engineer dan Supervisor yang ingin memahami dan meningkatkan pengetahuan dalam melakukan analisa system tenaga.

Metode  Training Electrical Power System Analysis Using ETAP

Presentasi, diskusi, studi kasus

Jadwal Training 2017

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 28 – 29 Agustus 2017
  • 04 – 05 September 2017
  • 11 – 12 September 2017
  • 18 – 19 September 2017
  • 25 – 26 September 2017
  • 02 – 03 Oktober 2017
  • 09 – 10 Oktober 2017
  • 16 – 17 Oktober 2017
  • 23 – 24 Oktober 2017
  • 30 – 31  Oktober 2017
  • 06 – 07 November 2017
  • 13 – 14 November 2017
  • 20 – 21 November 2017
  • 27 – 28 November 2017
  • 04 – 05 Desember 2017
  • 11 – 12 Desember 2017
  • 18 – 19 Desember 2017
  • 27 – 28 desember 2017

Investasi dan Fasilitas Training Electrical Power System Analysis Using ETAP

  • 8.900.000 (Non Residential) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • 7.900.000 (Non Residential) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 (Non Residential) untuk Lokasi Solo, Semarang atau Yogyakarta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Instruktur Training Electrical Power System Analysis Using ETAP

Tugino , ST,MT &Tim

 

ELECTRICAL POWER SYSTEM ANALYSIS USING ETAP

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ELECTRICAL POWER SYSTEM ANALYSIS

Acara

24 – 27 April 2017 | Rp 7.950.000/person di Bandung
02 – 05 Mei 2017 | Rp 7.950.000/person di Bandung
06 – 09 Juni 2017 | Rp 7.950.000/person di Bandung
24 – 27 Juli 2017 | Rp 7.950.000/person di Bandung

Jadwal Selanjutnya …

 

 

TRAINING OBJECTIVE :

The purpose of Electrical Power System Analysis training is to develop a thorough understanding of power system analysis and design as well as the overall capabilities of Power Station. Class room discussion and problem-solving has been designed to provide the analytical techniques necessary to solve a wide variety of practical problem encountered at field. In this training, participants will :

  1. Learn and get better understanding of electric power system operation and condition
  2. Learn and better understanding the types of electric power configuration
  3. Be able to calculate basic calculation of electric power system
  4. Be able to analyze disturbance
  5. Learn and better understanding of monitoring system and control
  6. Learn and better understanding effect of load in power system



MATERIAL
OUTLINE ELECTRICAL POWER SYSTEM ANALYSIS:

  1. Electric power grid representation and characteristic
  2. Type of electric power system configuration
  3. Basic calculation in normal condition
  4. Load shedding system and load analysis
  5. Basic calculation in disturbance condition and disturbance analysis
  6. Electrical Power System Monitoring Equipment
  7. Interactive discussion and cases study



WHO SHOULD ATTEND
THIS TRAINING?

  1. Electric Engineer/Supervisor/Superintendent
  2. Power Plant Maintenance Engineer/Supervisor/Superintendent
  3. Power Plant Operation Engineer/ Supervisor/ Superintendent
  4. Everyone  who wants to broaden knowledge on this topics



TRAINING INSTRUCTOR

Ir. Hasan Surya, MT. and Team

Ir. Hasan Surya, MT. is graduated from Bandung Institute of Technology (ITB) for Bachelor and Master program at Electrical Engineering department. Since 1985 till now Ir. Hasan Surya is lecturer at electrical engineering Polytechnique ITB (POLBAN)  and he is a head of department at electrical engineering. Ir. Hasan Surya have delivered some training topics related to his major expertise for  many companies in Indonesia. Ir. Hasan Surya have been researching in electrical engineering and becoming speaker for some conference. Ir. Hasan Surya has also worked for some companies or institution so he has got much real experiences  and now he is ready to share his knowledge and experiences to industrial world throught training class.

VENUE :

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)



TRAINING DURATION
:

4 days

 

 

TRAINING TIME

  1. 24 Apr 2017-27 Apr 2017
  2. 02 May 2017-05 May 2017
  3. 06 Jun 2017-09 Jun 2017
  4. 24 Jul 2017-27 Jul 2017
  5. 08 Aug 2017-11 Aug 2017
  6. 25 Sep 2017-28 Sep 2017
  7. 23 Oct 2017-26 Oct 2017
  8. 07 Nov 2017-10 Nov 2017
  9. 04 Dec 2017-07 Dec 2017

 

INVESTATION PRICE/ PERSON :

  1.  Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

ELECTRICAL POWER SYSTEM ANALYSIS

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days