Tag Archives: turbomachinery

TURBOMACHINERY: OPERATION, MAINTENANCE AND TROUBLESHOOTING

ACARA

28 – 31 Maret 2017 | Rp 7.950.000/person di Bandung
18 – 21 April 2017 | Rp 7.950.000/person di Bandung
09 – 12 Mei 2017 | Rp 7.950.000/person di Bandung
13 – 16 Juni 2017 | Rp 7.950.000/person di Bandung

Jadwal Training 2017 Selanjutnya …

 

TUJUAN TRAINING TURBOMACHINERY:

Diharapkan setelah pelatihan turbomachinery, peserta :

  • Mampu mengidentifikasi bagian bagian utama dari turbo machinery
  • Memahami prinsip kerja turbomachinery
  • Mengetahui prosedur operasi yang efektif
  • Mengetahui instrumentasi dan kontrol pada turbomachinery
  • Memahami peralatan pendukung turbomachinery
  • Mampu menganalisis problem seperti kavitasi, surging, vibrasi
  • Mampu mengatasi problem yang terjadi
  • Mengetahui prosedur perawatan

 

CAKUPAN MATERI TRAINING TURBOMACHINERY:

Turbin gas

  1. Prinsip kerja turbin gas
  2. Komponen komponen utama (kompresor, ruang bakar, turbin gas, rotor, sudu rotor)
  3. Prosedur operasi pada turbin gas
  4. Prestasi atau unjukkerja pada turbin gas
  5. Peralatan pendukung pada turbin gas (sistem starting, sistem pelumasan, sistem bahan bakar, sistem udara pemasukan )
  6. Chooking fenomena, surging, dan vibrasi pada turbin gas
  7. Instrumentasi dan kontrol
  8. Trouble shooting pada turbin gas
  9. Perawatan pada turbin gas

Turbin Uap

  1. Prinsip kerja turbin uap
  2. Komponen komponen pada turbin uap
  3. Prosedur operasi
  4. Prestasi turbin uap
  5. Sistem pelumasan pada turbin uap
  6. Instrumentasi, kontrol dan peralatan proteksi pada turbin uap
  7. Trouble shooting

Pompa dan Kompresor

  1. Prinsip kerja pompa dan kompresor
  2. Komponen komponen pompa dan kompresor
  3. Prosedur operasi pompa dan kompresor
  4. Prestasi pompa dan kompresor
  5. Chooking fenomena, surging, kavitasi dan vibrasi pada pompa dan kompresor
  6. Instrumentasi dan kontrol
  7. Trouble shooting
  8. Perawatan pada pompa dan kompresor

INSTRUCTOR TURBOMACHINERY:

Ir. Maridjo,MT. and team

Ir. Maridjo,MT. is alumnus from Mechanical Engineering Bandung Institute of Technology (ITB). He has been lecturer at PEDC and now as lecturer at mechanical engineering Polytechnique ITB (POLBAN). Ir. Maridjo has taught many topics related to his expertise to many companies in Indonesia, such as predictive and preventive maintenance, lubrication system, diesel machine, pump, gas turbine, piping and pipeline, compressor, boiler, and many others. Many participants from companies have been trained and collaborated with him such as Chevron, Semen Gresik, semen Baturaja, Pertamina, Pusri, GGPC, employee of Qatar and lybia oil and gas company, UP IV Balonganpertamina, PT. Indocement, some PLTA, some hotels, PT.PupukKujang, PT.BioFarma, BPPT, PT. BintangAgung, some other oil and gas companies in Indonesia and etc. Ir.Maridjo has been researching and publishing the results on his core competencies on academics standing.

VENUE TURBOMACHINERY:

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :

4 days

  JADWAL TRAINING

  1. 28 Mar 2017-31 Mar 2017
  2. 18 Apr 2017-21 Apr 2017
  3. 09 May 2017-12 May 2017
  4. 13 Jun 2017-16 Jun 2017
  5. 18 Jul 2017-21 Jul 2017
  6. 08 Aug 2017-11 Aug 2017
  7. 19 Sep 2017-22 Sep 2017
  8. 17 Oct 2017-20 Oct 2017
  9. 28 Nov 2017-01 Dec 2017
  10. 18 Dec 2017-21 Dec 2017

INVESTMENT PRICE/PERSON TURBOMACHINERY:

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS TURBOMACHINERY:

  1. Modul Training
  2. Flashdisk Training berisimateri training
  3. Sertifikat
  4. ATK: NoteBookdan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training denganfasilitas Full AC dan multimedia
  9. Makansiangdan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasiuntukpesertadari hotel penginapanke hotel tempat training – PP (jikapeserta minimal darisatuperusahaanada 4 peserta)

TURBOMACHINERY: OPERATION, MAINTENANCE AND TROUBLESHOOTING

 

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

TURBOMACHINERY MONITORING AND PROBLEM ANALYSIS

Event
08 – 10 September 2015 | Rp 8.000.000 at Yogyakarta
06 – 08 Oktober 2015 | Rp 8.000.000 at Yogyakarta
17 – 19 November 2015 | Rp 8.000.000 at Yogyakarta
08 – 10 Desember 2015 | Rp 8.000.000 at Yogyakarta

 

 

DESCRIPTION TRAINING TURBOMACHINERY MONITORING AND PROBLEM ANALYSIS

This five-day course is an intensive, intermediate level program for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbomachinery. This course focuses on defining the systems and subsystems that form the turbomachinery, the potential problems with these systems and subsystems, monitoring techniques for early detection of problems, and methods to analyze the monitored variables to detect potential problems or reconstruct reasons for failures. Case studies are used throughout the course.

 

BENEFITS TRAINING TURBOMACHINERY MONITORING AND PROBLEM ANALYSIS

  • How to evaluate turbine performance during startup and operation
  • How to identify turbomachinery system components
  • How to define and use appropriate monitoring techniques and tools
  • How to utilize effective operation and shutdown procedures
  • How to analyze common turbomachinery problems, such as vibration, temp/pressure operation and surge
  • How to solve instrumentation and control problems
  • Understand the inter-relationships of drivers, couplings, gearboxes, and driven equipment
  • Installation techniques, equipment failures and different maintenance practices
  • Economic considerations

 

OUTLINE TRAINING TURBOMACHINERY MONITORING AND PROBLEM ANALYSIS

  • Gas turbine machinery – general description
  • Operating principles of gas turbines
  • Key performance variables and means to monitor
  • Major components of axial flow compressors: rotors, blades, shafts, combustion chambers, nozzles, etc
  • Auxiliary systems: lube oil, seal oil, fuel, start-up, etc
  • Evaluation of turbine performance parameters during start-up and normal operation
  • Troubleshooting control systems for gas turbines: start-up, speed and temperature controls, vibration
  • Principles of operation and general components of compressors: rotors, seals, diaphragms, etc
  • Operating characteristics curves
  • Surging phenomenon
  • Choking phenomenon
  • Compressor instrumentation: various control loops; anti-surge control loops
  • Compressor safety interlock and trip systems
  • Gas turbine and compressor systems start-up procedures
  • Normal operation – monitoring of parameters
  • Shutdown procedures
  • Logging of monitoring checks
  • Vibration monitoring
  • Troubleshooting

 

PARTICIPANTS

Karyawan/staff hingga level Manager dari latar belakang Safety & Health Environment/Lingkungan Perusahaan, Process Engineer, Chemical Dept.,  Operator pengolahan limbah, dan semua bagian yang terlibat dalam pengolahan limbah dan pemerhati ataupun praktisi yang peduli terhadap lingkungan.

INSTRUCTUR

I Nengah Diasta

 

TRAINING METHOD

  • Presentation
  • Discussion
  • Case Study
  • Evaluation

 

 

TIME

  • 08-10 September 2015
  • 06-08 Oktober 2015
  • 17-19 November 2015
  • 08-10 Desember 2015

 

PLACE

  • JAKARTA
  • BANDUNG
  • YOGYAKARTA
  • BATAM
  • SEMARANG
  • SURABAYA
  • DENPASAR
  • MEDAN
  • DLL

 

 TRAINNING FEE

Rp 8.000.000,-/person/Non Recidential

 

 

FACILITY

  • Training Kit
  • Handout
  • Certificate
  • Lunch + 2 X Coffee Break
  • Souvenir
  • Pick Up Participant

 

TURBOMACHINERY MONITORING AND PROBLEM ANALYSIS

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days