Tag Archives: training AC

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEM

ACARA

16 – 19 Oktober 2017 | Rp. 7.950.000/person di Yogyakarta
20 – 23 November 2017 | Rp. 7.950.000/person di Yogyakarta
18 – 21 Desember 2017 | Rp. 7.950.000/person di Yogyakarta

 

PENDAHULUAN TRAINING AC AND REFRIGERATION

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.



CAKUPAN MATERI TRAINING AC AND REFRIGERATION

  1. Basic Concept of AC & DC.
  2. Instalasi dan trouble shooting
  3. Perawatan
  4. Intro To Load Estimating
  5. Load Estimating : Cooling and Heating
  6. Load Estimating : System Design
  7. Mechanical Refrigeration : Cycle Descrip.
  8. Mechanical Refrigeration Cycle Analysis
  9. Ducting Design : Principle & Method
  10. Fundamental of Psychrometric
  11. Psychrometric : Properties of Air ADV.PROG.
  12. Refrigerant Piping System
  13. Water Piping & Pump Selection
  14. Multi Room Buildings,Load CH.SYS.PROG.
  15. Ducting Design : Air Side
  16. Ducting Design : Centrifugal Fan
  17. Ducting Design : Room Air Distribution
  18. Cooling Coil Performance
  19. Air Handling Unit : Central SYS.
  20. Heat Rejection Equipment & Cooling Tower
  21. Control Principles & Method.
  22. Test Merancang Sistem Tata Udara
  23. Centrifugal REF.Equipment
  24. Absorption REF.Equipment
  25. Reciprocating REF.Equipment
  26. Reciprocating Chiller
  27. Large Packaged Equipment

SIAPA SEBAIKNYA MENGIKUTI TRAINING AC AND REFRIGERATION INI?:

Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.



INSTRUKTUR TRAINING AC AND REFRIGERATION

Ir. Y. Agus Jayatun, MT.,IPP. And Team

Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.



TEMPAT TRAINING AC AND REFRIGERATION

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

DURASI TRAINING AC AND REFRIGERATION

4 hari

 

 WAKTU TRAINING:

  • 16 Oct 2017-19 Oct 2017
  • 20 Nov 2017-23 Nov 2017
  • 18 Dec 2017-21 Dec 2017

 

HARGA INVESTASI/PESERTA TRAINING AC AND REFRIGERATION

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

FASILITAS UNTUK PESERTA TRAINING AC AND REFRIGERATION

  1. Modul Training
  2. CD Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. Jaket atau rompi
  6. Tas atau ransel
  7. Foto training
  8. Ruangan training dengan fasilitas full AC dan multimedia
  9. lunch dan dua kali coffee break
  10. Instruktur yang qualified
  11. Transportasi untuk peserta dari hotel penginapan peserta ke hotel tempat training (jika minimal peserta dari 1 perusahaan ada 4 orang)

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEM

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEMS – Confirmed

ACARA

12 – 14 September 2017 | Rp 7.000.000 di Hotel Horison Ultima Riss, Yogyakarta



DESKRIPSI

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.



MATERI TRAINING AC AND REFRIGERATION

  • Basic Concept of AC & DC.
  • Instalasi dan trouble shooting
  • Perawatan
  • Intro To Load Estimating
  • Load Estimating : Cooling and Heating
  • Load Estimating : System Design
  • Mechanical Refrigeration : Cycle Descrip.
  • Mechanical Refrigeration Cycle Analysis
  • Ducting Design : Principle & Method
  • Fundamental of Psychrometric
  • Psychrometric : Properties of Air ADV.PROG.
  • Refrigerant Piping System
  • Water Piping & Pump Selection
  • Multi Room Buildings,Load CH.SYS.PROG.
  • Ducting Design : Air Side
  • Ducting Design : Centrifugal Fan
  • Ducting Design : Room Air Distribution
  • Cooling Coil Performance
  • Air Handling Unit : Central SYS.
  • Heat Rejection Equipment & Cooling Tower
  • Control Principles & Method.
  • Test Merancang Sistem Tata Udara
  • Centrifugal REF.Equipment
  • Absorption REF.Equipment
  • Reciprocating REF.Equipment
  • Reciprocating Chiller
  • Large Packaged Equipment



PEMATERI

Ir. Y. Agus Jayatun MT and Team

Ahli di bidang Mechanical & Operation

METODE

Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:

  1. Presentation
  2. Discuss
  3. Case Study
  4. Evaluation

PESERTA

Peserta yang diharapkan berpartisipasi dalam program ini antara lain Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.

WAKTU & TEMPAT

  • 12 – 14 September 2017
  •  Pukul 08.30 – 16.00 WIB

Hotel Horison Ultima Riss Yogyakarta

Request for Training Venue: Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

Investasi

  • Course Fee : Rp. 7.000.000,-/participant (non residential)
  • Special price : Rp. 6.500.000,-/participant (non residential) min kirim 2 peserta dari perusahaan yang sama.

 

Fasilitas

  • Training Module
  • Free High Quality Electronic Books
  • Certificate
  • Jacket or Batik
  • Qualified Bag
  • Training Photo
  • Training room with full AC facilities and multimedia
  • Once lunch and twice coffee break every day of training
  • Qualified Instructor
  • Transportation from airport / railway to hotel and from hotel to the training venue

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEMS

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

AC AND REFRIGERATION: SAFETY AND CONTROL SYSTEMS

Acara

25 – 27 Mei 2016 | Rp. 8.500.000 per peserta di Hotel Merapi Merbabu, Yogyakarta
22 – 24 Juni 2016 | Rp. 8.500.000 per peserta di Hotel Merapi Merbabu, Yogyakarta
27 – 29 Juli 2016 | Rp. 8.500.000 per peserta di Hotel Merapi Merbabu, Yogyakarta
23 – 25 Agustus 2016 | Rp. 8.500.000 per peserta di Hotel Merapi Merbabu, Yogyakarta

Jadwal Selanjutnya …




ABSTRACK TRAINING AC AND REFRIGERATION 

Memberikan pengetahuan tentang dasar peralatan kontrol dan keamanan pada mesin-mesin pendingin atau mesin refrigerasi. Berbagai macam peralatan dan sistem keamanan dijelaskan secara komprehensif mulai dari pemilihan, prinsip kerja, perawatan, dan penanganan masalah dalam proses pendinginan.

 

OUTLINE AC AND REFRIGERATION

  1. Basic Concept of AC & DC.
  2. Instalasi dan trouble shooting
  3. Perawatan
  4. Intro To Load Estimating
  5. Load Estimating : Cooling and Heating
  6. Load Estimating : System Design
  7. Mechanical Refrigeration : Cycle Descrip.
  8. Mechanical Refrigeration Cycle Analysis
  9. Ducting Design : Principle & Method
  10. Fundamental of Psychrometric
  11. Psychrometric : Properties of Air ADV.PROG.
  12. Refrigerant Piping System
  13. Water Piping & Pump Selection
  14. Multi Room Buildings,Load CH.SYS.PROG.
  15. Ducting Design : Air Side
  16. Ducting Design : Centrifugal Fan
  17. Ducting Design : Room Air Distribution
  18. Cooling Coil Performance
  19. Air Handling Unit : Central SYS.
  20. Heat Rejection Equipment & Cooling Tower
  21. Control Principles & Method.
  22. Test Merancang Sistem Tata Udara
  23. Centrifugal REF.Equipment
  24. Absorption REF.Equipment
  25. Reciprocating REF.Equipment
  26. Reciprocating Chiller
  27. Large Packaged Equipment

INSTRUCTOR

Ir. Prajitno, M.T.

 

  PARTICIPANT

Teknisi, Engineer, Supervisor yang bekerja pada bidang maintenance di perusahaan.

 

 

DATE  AND VENUE

  • Hotel Merapi Merbabu, Yogyakarta
  • 25-27 Mei, 22-24 Juni, 27-29 Juli, 23-25 Agustus,  27-29 September,  24-26 Oktober, 21-23 November,  28-30 Desember 2016
  • Pukul : 08.00 – 16.00 WIB

 

TUTION FEE

  • Biaya Rp. 8.500.000 per peserta (Non Residential).
  • Pembayaran dapat dilakukan pada saat pelatihan

 

FACILITIES
Training Modules, Training Kit, Certificate, Exclusive Souvenir, Dinner & City Tour, Coffee Break & Lunch

AC AND REFRIGERATION: SAFETY  AND CONTROL SYSTEMS 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days