Tag Archives: Pressure Measurement

PRODUCTION LOGGING

Event

22 – 25 Mei 2018 | Rp 8.500.000/person di Bandung
05 – 08 Juni 2018 | Rp 8.500.000/person di Bandung
17 – 20 Juli 2018 | Rp 8.500.000/person di Bandung
28 – 31 Agustus 2018 | Rp 8.500.000/person di Bandung

Jadwal Training 2018 Selanjutnya …

 



TRAINING
DESCRIPTION:

The training covers the practical and theoretical aspects modern production logging operations in terms of tool selection and data requirements, measurement limitations, analysis and its pitfalls. In the practical sessions, real field data are analyzed and the results discussed in depth.

 



OBJECTIVE

This training is designed for engineers and other technical personnel who are involved at any stage in the specification, acquisition or interpretation of cased-hole wireline measurements. The training aims to provide a practical understanding of the physical phenomena involved, measurement principles, equipment types and the analysis of production logging surveys.



MATERIAL OUTLINE TRAINING PRODUCTION LOGGING :

1. Introduction

  •  Overview of layered reservoir behavior in producers/injectors as measured by wireline tools

2. Flow Rate Measurement

  • Measurement of flow rate by spinner, spinner flow meter calibration
  • Case Study: Spinner calibration and interpretation in an inclined well, shut in and flowing, layered inflow performance

3. Fluid Identification

  •  Phase hold up by pressure gradient, radio active fluid density and dielectric (capacitance) based methods

4. Temperature Measurement

  • Main features of temperature profiles in producing and injecting wells
  • Anomalous temperature profiles

5. Pressure Measurement
6. Calliper, Gamma Ray, CCL, and Depth Control: Modern Production Logging Toolstrings
7. Two Phase Flow

  • PVT properties, flow regimes, simplistic slip velocity model
  • Case study cont; two-phase interpretation, shut in and flowing, complicating factors, well deviation misleading responses

8. Three phase flow

  •  Horizontal wells: problems encountered with conventional logging sensors
  •  Recent developments: probe tools, hold-up imaging, phase velocity measurement

9. Miscellaneous Sensors

  • Fiber optics, down-hole video, noise logging

 

INSTRUCTOR 

Ir. Sudiharto, MT. and team

Ir. Sudiharto, MT,  is alumnus from Bandung Institute of Technology (ITB) department of petroleum engineering. Ir. Sudiharto besides as instructor and researcher at Geothermal Laboratory ITB, he is also being as Production Engineer at LAPI ITB, Production & Reservoir Analist and  expert board (Dewan Pakar) at Forum Komunikasi Daerah Penghasil Migas, and joining in Community Development Team Dirjen Migas since 2003.

Some projects have been handled by him such as policy analysis expert on oil and gas subsector, oil and gas production expert, and field economicity such as: projection study investation potency energy and mineral resources, implementation study national energy consumtion, study on field use of Brownfield in Indonesia, inventarization research of old well potential in regency of Muaro Jambi,  blueprint arrangement manpower on oil and gas subsector, development operation cost estimation system oil and gas: geological and geophysical stage, study of combustion flare gas at PERTAMINA DOH Jawa Bagian Barat, survey and development of GIS based datas for planning and distribution BBM  and transportation gas through pipe, study on planning of Indonesia – Asean pipeline system, etc. Ir. Sudiharto have trained for training class for many companies in Indonesia. Some topics that have been frequently delivered by him as follows :

  1. Electric Submercible Pump, Problem and Trouble Shooting Mecanism
  2. Crude Oil Analysis
  3. Drilling, Production and Workover Strategy
  4. Well Workover and Completion Stretegy
  5. Petroleum Finance, Acconting and Reservoir Management
  6. Plan of Development in Oil and Gas Industries
  7. Pressure Control for Drilling Engineer
  8. Plan of Development (POD) & Authorization For Expenditures (AFE)
  9. Management Skills Secretary Petroleum Gas and Oil Industries
  10. Pressure Transient Analysis and Well Testing Data Interpretation
  11. Oil Production System and Operation
  12. Formation Damaged and Well Stimulation
  13. Simulasi Reservoir for Petroleum Engineer
  14. Oil and gas transportation/measurement, etc

 

VENUE 

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

DURASI TRAINING 

4 hari

 

JADWAL TRAINING

  1. 22 May 2018-25 May 2018
  2. 05 Jun 2018-08 Jun 2018
  3. 17 Jul 2018-20 Jul 2018
  4. 28 Aug 2018-31 Aug 2018
  5. 18 Sep 2018-21 Sep 2018
  6. 02 Oct 2018-05 Oct 2018
  7. 20 Nov 2018-23 Nov 2018
  8. 10 Dec 2018-13 Dec 2018

 

 

INVESTATION PRICE/PERSON 

  1.  Rp 8.500.000/person (full fare)  or
  2.  Rp 8.250.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of training
  10.  Qualified Instructor
  11.  Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)

 

PRODUCTION LOGGING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PROCESS CONTROL FOR NON CONTROL ENGINEERS

Acara

24 – 26 October 2017 | IDR 6.000.000 di Hotel Horison Ultima-Riss, Yogyakarta
01 – 03 November 2017 | IDR 6.000.000 di Hotel Horison Ultima-Riss, Yogyakarta
07 – 09 November 2017 | IDR 6.000.000 di Hotel Horison Ultima-Riss, Yogyakarta
14 – 16 November 2017 | IDR 6.000.000 di Hotel Horison Ultima-Riss, Yogyakarta

Jadwal Training 2017 Selanjutnya …



TRAINING OUTLINES

Introduction

  • Basic concepts
  • Definitions
  • Overview of pressure, level, temperature and flow
  • Overview of valves

Pressure Measurement

  • Principles
  • Sources
  • Transducers and elements
  • Specifications
  • Installation issues

Level Measurement

  • Principles
  • Simple sight glasses
  • Buoyancy tape systems
  • Hydrostatic pressure
  • Ultrasonic measurement
  • Radiation measurement
  • Electrical measurement
  • Density measurement
  • Installation issues

Temperature Measurement

  • Principles
  • Thermocouples
  • Resistance temperature detectors
  • Thermistors
  • Liquid-in-glass, filled, bimetallic
  • Pyrometers
  • Installation issues

Flow Measurement

  • Principles
  • Differential pressure flowmeters
  • Open channel flow measurement
  • Oscillatory flow measurement
  • Magnetic flow measurement
  • Positive displacement
  • Ultrasonic flow measurement
  • Mass flow measurement
  • Installation issues

Control Valves

  • Principles
  • Control valve types
  • Selection
  • Characteristics / trim
  • Noise and cavitation
  • Actuators and positioners
  • Installation issues

Basic Process Control System

  • Open Loop
  • Closed Loop, feedback loop
  • On-off Controllers
  • Controller Proportional
  • Controller Proportional + Integral
  • Controller Proportional + Integral + Derivative

Tuning Process Control

  • Methode Cohen Coon
  • Methode Ziegler and Nichols
  • Optimum setting

Control Startegy

  • Introductions to:
  • Control Feed-forward
  • Ratio Control
  • Override Control
  • Batch Control
  • Adaptive Control System
  • Advanced Process Control

 

INSTRUCTOR

Miftahul Huda, ST., M. Eng.

 

TIME & VENUE

 

  • 24-26 October 2017
  • 1-3 November 2017
  • 7-9 November 2017
  • 14-16 November 2017
  • 21-23 November 2017
  • 5-7 December 2017
  • 12-14 December 2017
  • 19-21 December 2017
  • 26-28 December 2017

Hotel Horison Ultima-Riss/ Mangkubumi/ Hotel Neo Malioboro | Yogyakarta

 

TRAINING FEE

  • Training fee : IDR 6.000.000 per peserta – nonresidential, 3 days training duration in Yogyakarta with the minimal participant of 2 persons. For the company sending more than 3 persons IDR 5.8000
  • Other Training Venues: Bandung, Semarang, Surabaya, Balikpapan, Samarinda, Malang, Bali, Lombok, Batam, Pakanbaru with the minimal quota of 4 persons. Training fee – call

 

TRAINING FACILITIES

  1. Training Module
  2. Training kits
  3. Qualified instructor
  4. Fine bag pack
  5. USB/Flashdisk containing materials
  6. Certificate
  7. Exclusive polo shirt
  8. Training photo
  9. 2x coffee break and lunch at days of training
  10. Transport Service from airport to the hotel (min. 2 persons from th


PROCESS CONTROL FOR NON CONTROL ENGINEERS

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days