Tag Archives: Predictive Maintenance

MAINTENANCE MANAGEMENT

ACARA

02 – 04 Mei 2018 | Rp 6.000.000,- di Yogyakarta
26 – 28 Juni 2018 | Rp 6.000.000,- di Yogyakarta
10 – 12 Juli 2018 | Rp 6.000.000,- di Yogyakarta
01 – 03 Agustus 2018 | Rp 6.000.000,- di Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI

Maintenance Management adalah suatu manajemen perawatan mesin tentang tata cara melakukan kegiatan maintenance mesin-mesin dalam suatu pabrik secara efektif dan efisien. Perawatan merupakan bagian yang sangat penting guna menjamin keberlangsungan kegiatan produksi dari sebuah instalasi industri. Beragamnya jenis peralatan, teknologi yang digunakan, kondisi kerja peralatan dan sebagainya membuat jenis perawatannyapun sangat beragam, dimana setiap metoda perawatan akan sangat sesuai dengan kondisi spesifik peralatan maupun operasinya. Pada pelatihan ini peserta diharapkan akan mampu memahami jeis-jenis perawatan serta peneraannya di industri, sehingga dapat menganalisa ataupun memahami metoda perawatan yang dilaksanakannya.

Pelatihan ini akan membahas bagaimana mengelola program maintenance secara komprehensif, sistematis, namun praktis dan aplikatif guna mendukung proses produksi dan penjualan melalui penciptaan produk bermutu.

 

TUJUAN

Setelah mengikuti pelatihan ini diharapkan peserta dapat:

  • Memahami peran dan fungsi Maintenance Management guna mendukung proses produksi dan penjualan
  • Membuat keputusan menyangkut sistem perawatan dan perlakuan yang terbaik terhadap suatu mesin
  • Mampu meingkatkan nilai daya saing perusahaan melalui proses pengendalian fungsi dan kinerja mesin yang terkendali, terukur, efektif dan efisien
  • Memahami pengelolaan manajemen perawatan dan dan continuous improvement

MATERI TRAINING MAINTENANCE MANAGEMENT

  1. Introduction
  2. Tipe–tipe Maintenance:
    • Overhaul Maintenance, Break Down Maintenance, Preventive Maintenance, Predictive Maintenance, Maintenance Procedure, Work Organization Maintenance Division
  3. Maintenance Planning and Control:
    • Maintainability and Reliability, Maintenance Planning, Work Schedule, Equipment Replacement, Overhaul and Repair Scheduling
  4. Managing the Maintenance Staff:
    • Scheduling and Implementation, Labor Standards and Efficiency, On-the-Job Training, Motivating the Maintenance Staff
  5. Budget Planning and Maintenance Schedule:
    • Introduction to Maintenance Budget, Maintenance Budget Estimation, Strategy and Replacement method, Objective Performance, Availability
  6. Predictive Maintenance Technique:
    • Vibration Monitoring, Thermography, Tribology, Process Parameters, Visual Inspection, Ultrasonic Monitoring.
  7. Machine Vibrating Monitoring:
    • Basic of vibration, vibration characteristic, transducer for vibration, vibration parameter.
  8. The Economic of Maintenance and Inspection
  9. Age Replacement Calculation
  10. Sampling Inspection
  11. Maintenance Management Logistics
  12. Continuous Improvement In Maintenance
    • Problem Solving and Solution
    • Audit of the Maintenance Organization

 

NSTRUKTUR:

  • Teguh Pudji Purwanto, MT.
  • Ir. Tri Prakosa, M.Eng.

Nara sumber adalah pakar Mechanical Engineering yang sering memberikan materi di berbagai training, seminar, workshop, terutama yang berkaitan dengan topik Maintenance Management.

 

METODE:

  • Presentasi
  • Diskusi Interaktif
  • Studi Kasus
  • Simulasi
  • Evaluasi

 

PESERTA

Pelatihan ini sesuai untuk diikuti oleh: General Manager, Manager, Supervisor, Teknisi, Engineer, Staff yang bagian perawatan dan Engineering, serta personal yang bekerja pada Divisi Maintenance and Operation.

WAKTU & TEMPAT TRAINING

  • Batch 5: 02 – 04 Mei 2018
  • Batch 6: 26 – 28 Juni 2018
  • Batch 7: 10 – 12 Juli 2018
  • Batch 8: 01 – 03 Agustus 2018
  • Batch 9: 25 – 27 September 2018
  • Batch 10: 16 – 18 Oktober 2018
  • Batch 11: 06 – 08 November 2018
  • Batch 12: 11 – 13 Desember 2018
  • 08.00 – 16.00 WIB

Yogyakarta: Cavinton Hotel Yogyakarta ; Neo Malioboro Hotel Yogyakarta

  Ibis Styles Hotel Yogyakarta

Surabaya: Hotel Santika Pandegiling Surabaya

Malang: Best Western OJ Hotel Malang ; Harris Hotel & Convention Malang

Jakarta: Dreamtel Jakarta Hotel ; Ibis Jakarta Tamarin Hotel

Bandung: Golden Flower Hotel Bandung ; Serela Cihampelas Hotel Bandung

Bali: Ibis Bali Kuta Hotel ; Harris Kuta Raya Hotel Bali

In House Training : Depend on request

BIAYA:

Yogyakarta:

  • Publish Rate              : Rp 6.000.000,- /participant
  • Special Rate              : Rp 5.500.000,- /participant (min 3 participants from the same company)

Bandung / Jakarta / Surabaya / Malang:

  • Publish Rate              : Rp 7.000.000,- /participant

Bali:

  • Publish Rate              : Rp 8.000.000,- /participant

FASILITAS:

  • Meeting Room at Hotel
  • Coffe Break & Lunch
  • Module (hard & soft copy/flashdish)
  • Training Kit & Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

 

MAINTENANCE MANAGEMENT

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

MAINTENANCE MANAGEMENT

Acara

03 – 04 April 2018 | Rp. 3.750.000 di Hotel Menara Peninsula Slipi, Jakarta
03 – 04 Mei 2018 | Rp. 3.750.000 di Hotel Menara Peninsula Slipi, Jakarta
05 – 06 Juni 2018 | Rp. 3.750.000 di Hotel Menara Peninsula Slipi, Jakarta
03 – 04 Juli 2018 | Rp. 3.750.000 di Hotel Menara Peninsula Slipi, Jakarta

Jadwal Training 2018 Selanjutnya …

 

DESKRIPSI TRAINING EFFECTIVE MAINTENANCE MANAGEMENT

Sebagai salah satu kinerja perfomansi suatu perusahaan manufaktur moderen saat ini adalah cepat tanggapnya sistem pelaksanaan perawatan yang diakibatkan adanya perubahan dan perkembangan fasilitas pabrik yang dirancang sedemikian rupa kompkleks dengan sasaran untuk menghasilkan produk dengan kualitas tinggi dan cepat. Pada dasarnya perawatan merupakan kombinasi dari semua tindakan teknik dan tindakan administratatif untuk mempertahankan kondisi atau mengembalikan kondisi fungsi komponen.

Strategic & Operation Management

Maintenance Management adalah suatu manajemen perawatan mesin yang mengulas tentang tata cara melakukan kegiatan maintenance mesin-mesin dalam suatu pabrik secara simple, terstruktur dan praktis.

Di dalam training ini akan dibahas tentang “8 Pilar Maintenance Manajemen” dimana di dalamnya akan membahas mulai dari bagaimana membuat sebuah Maintenance System secara terstruktur dan terintegrasi (bahkan dengan ISO 9001), Bagaimana membuat suatu maintenance plan, Bagaimana membuat keadaan ideal suatu mesin, Apa itu Quantity dan Quality of Maintenance, Bagaimana mengontrol Spare Part mesin melalui Spare Part Availability Management, Bagaimana cara membuat Maintenance dan Performance Report dari suatu mesin, Bagaimana melakukan suatu improvement dari suatu mesin sampai dengan bagaimana melakukan control terhadap biaya / cost dari suatu kegiatan maintenance.

Maintenance Manajemen ini telah diaplikasikan di dalam sebuah industri dan sanggup menurunkan break down machine sampai 50%, mengurangi personel maintenance sampai 40%, menjawab permasalahan ketersediaan spare part sampai dengan penurunan biaya maintenance hingga 50%.

Pelatihan ini sangat cocok sekali bagi seorang teknisi pemula yang berkecimpung dalam kegiatan maintenance atau suatu perusahaan yang mulai concern terhadap perawatan mesin atau bahkan suatu perusahaan yang bingung terhadap apa yang terjadi / apa yang akan dilakukan terhadap mesin-mesin yang merongrong kegiatan produksi. Pelatihan ini juga sangat baik sebagai bahan benchmarking terhadap implementasi kegiatan maintenance yang telah dijalankan.

 

MATERI TRAINING EFFECTIVE MAINTENANCE MANAGEMENT

  • Triangle Maintenance System.Sistem yang mengintegrasikan Maitenance Sistem dengan persyaratan ISO 9001, Maintenance Regulataion, Maintenance Procedure, Plan Maintenance, Checklist and Reporting.
  • Ideal State of Machine.Mempelajari kondisi ideal suatu mesin berdasakan metode Fundamental Function dan Fundamental Condition.
  • Quantity of Maintenance. Mempelajari cara melakukan manajemen terhadap jumlah mesin dan jumlah personel maintenance.
  • Quality of Maintenance. Mempelajari cara mengukur kualitas dari pekerjaan maintenance yang dilakukan oleh personel maintenance.
  • Spare Part Manajemen. Mempelajari manajemen spare part yang mengelola inventori spare part sehingga menjamin ketersediaan spare parts suatu mesin.
  • Machine Effectiveness Calculation. Mempelajari cara menghitung effectiveness suatu mesin, pembuatan control chart suatu kegiatan maintenance serta laporan performance suatu mesin / line.
  • Machine Improvement. Mempelajari cara melakukan improvement terhadap kerusakan mesin dengan menggunakan metode Pareto Chart
  • Maintenance Cost Manajemen. Mempelajari cara pengontrolan biaya yang dikeluarkan dalam kegiatan maintenance beserta cara melakukan cost down / penurunan biaya maintenance.

 

METODE TRAINING EFFECTIVE MAINTENANCE MANAGEMENT

Pelatihan menekankan penggunaan diskusi,simulasi, kasus-kasus dan latihan, multimedia.

 

INSTRUKTUR TRAINING EFFECTIVE MAINTENANCE MANAGEMENT

Praktisi Expert yang telah banyak memberikan training tentang EFFECTIVE MAINTENANCE MANAGEMENT dengan menggunakan tools yang maksimal dalam meningkatkan keterampilan dalam komunikasi.

 

 

Jadwal & Tempat

  • 01 – 02 Februari 2018
  • 01 – 02 Maret 2018
  • 03 – 04 April 2018
  • 03 – 04 Mei 2018
  • 05 – 06 Juni 2018
  • 03 – 04 Juli 2018
  • 02 – 03 Agustus 2018
  • 04 – 05 September 2018
  • 02 – 03 Oktober 2018
  • 01 – 02 November 2018
  • 04 – 05 Desember 2018
  • 09.00 – 16.00 WIB

Pkl. 09.00 – 16.00 WIB

Hotel Menara Peninsula Slipi, Hotel Puri Denpasar, Hotel Harris Tebet, Hotel Fave Gatot Subroto, Hotel Ibis Jakarta

 

Investasi:

  • Rp. 3.750.000,-/peserta
  • Including: Sertifikat,Training Modules, Workshop kit, Lunch, Snack, Foto 10R

 

EFFECTIVE MAINTENANCE MANAGEMENT

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PREVENTIVE AND PREDICTIVE MAINTENANCE

ACARA

19 – 20 Maret 2018 | Rp. 6.900.000 Per Peserta di Yogyakarta/ Semarang/ Solo
19 – 20 Maret 2018 | Rp. 7.900.000 Per Peserta di Bandung/ Jakarta/ Surabaya
19 – 20 Maret 2018 | Rp. 8.900.000 Per Peserta di Bali/ Batam/ Balikpapan/ Manado/ Lombok
26 – 27 Maret 2018 | Rp. 6.900.000 Per Peserta di Yogyakarta/ Semarang/ Solo

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI PREVENTIVE AND PREDICTIVE MAINTENANCE

The course will cover topics on maintenance information how preventive and predictive maintenance management, total productive maintenance, parameter monitoring and analysis,  schedule maintenance,  maintenance budget estimation, and equipments condition monitoring.

 

MATERI BAHASAN PREVENTIVE AND PREDICTIVE MAINTENANCE

1. Basic of Productive Maintenance

  • Introduction to Maintenance Management
  • The Important of Maintenance Management
  • The Aspects of Maintenance Management
  • Terminology of Maintenance Management

2. Types of maintenance

  • Overhaul Maintenance
  • Break Down Maintenance
  • Preventive Maintenance
  • Predictive Maintenance
  • Maintenance Procedure
  • Work Organization Maintenance Division

3. Maintenance Planning and Control

  • Maintainability and Reliability
  • Maintenance Planning
  • Work Schedule
  • Equipment  Replacement

4. Budget Planning and Maintenance Schedule

  • Introduction to  Maintenance Budget
  • Maintenance Budget Estimation
  • Strategy and Replacement method
  • Objective Performance
  • Availability

5. Predictive Maintenance Technique

  • Vibration Monitoring
  • Thermography
  • Tribology
  • Process Parameters
  • Visual Inspection
  • Ultrasonic Monitoring

6. Machine Vibrating Monitoring

  • Basic of vibration
  • vibration characteristic
  • transducer for vibration
  • vibration parameter

 

PESERTA

Technician, Engineer, Supervisor and personnel who work at maintenance and Operation Division

 

METODE

  • Presentasi
  • Diskusi
  • Studi Kasus

 

 

 

Jadwal Training 2018

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 19 – 20 Maret 2018
  • 26 – 27 Maret 2018
  • 02 – 03 April 2018
  • 09 – 10 April 2018
  • 16 – 17 April 2018
  • 23 – 24 April 2018
  • 02 – 03 Mei 2018
  • 07 – 08 Mei 2018
  • 14 – 15 Mei 2018
  • 21 – 22 Mei 2018
  • 30 – 31 Mei 2018
  • 04 – 05 Juni 2018
  • 25 – 26 Juni 2018
  • 02 – 03 Juli 2018
  • 09 – 10 Juli 2018
  • 16 – 17 Juli 2018
  • 23 – 24 Juli 2018
  • 30 – 31 Juli 2018
  • 06 – 07 Agustus 2018
  • 13 – 14 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 28 Agustus 2018
  • 03 – 04 September 2018
  • 12 – 13 September 2018
  • 17 – 18 September 2018
  • 24 – 25 September 2018
  • 01 – 02 Oktober 2018
  • 08 – 09 Oktober 2018
  • 15 – 16 Oktober 2018
  • 22 – 23 Oktober 2018
  • 29 – 30 Oktober 2018
  • 05 – 06 November 2018
  • 12 – 13 November 2018
  • 21 – 22 November 2018
  • 26 – 27 November 2018
  • 03 – 04 Desember 2018
  • 10 – 11 Desember 2018
  • 17 – 18 Desember 2018
  • 26 – 27 Desember 2018

 

Investasi dan Fasilitas

  • Rp 8.900.000 (Non Residential) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • Rp 7.900.000 (Non Residential) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 (Non Residential) untuk Lokasi Solo, Semarang atau Yogyakarta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

Instruktur

Ir Teguh Pudji Poerwanto MT and Team

 

PREVENTIVE AND PREDICTIVE MAINTENANCE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PREVENTIVE & PREDICTIVE MAINTENANCE

Acara

12 – 15 Maret 2018 | Rp. 8.500.000/peserta di Bandung
09 – 12 April 2018 | Rp. 8.500.000/peserta di Bandung
07 – 10 Mei 2018 | Rp. 8.500.000/peserta di Bandung
26 – 29 Juni 2018 | Rp. 8.500.000/peserta di Bandung

Jadwal Training 2018 Selanjutnya …

 

 

TRAINING OBJECTIVE PREVENTIVE & PREDICTIVE MAINTENANCE :

Preventive & Predictive Maintenance is a maintenance system which very reliable to prevent some sudden troubles or breakdown that may happened on factory’s tools/equipments. The sudden troubles are very potential things that caused a big loss in production process. The effects of this problem are some failure to achieve production target, the lack of personnel, unprepared spare parts, etc. Preventive & Predictive Maintenance application system starts from standard arranging, activity planning, realization supervising, and, as the finish line is, evaluating and analyzing the maintenance’s result.



WHO SHOULD ATTEND TRAINING PREVENTIVE & PREDICTIVE MAINTENANCE ?

Preventive & Predictive Maintenance course is designed for manager, supervisor, engineer, planer, foreman, and technician. Also, for those who are in operations, engineering and purchasing division and who would like to acquire an understanding of how the quality of the maintenance function affects their function.



WHAT WILL THE PARTICIPANT GET FROM PREVENTIVE & PREDICTIVE MAINTENANCE TRAINING?

After completing this course, participants will be able to:

  • Develop, implement and supervise the Preventive & Predictive Maintenance program
  • Economize the time, money and company’s resources by using sophisticated technique and method in order to optimize the affectivity of maintenance.
  • Prevent the company’s equipment and tools from damage and make the machine’s living period longer.
  • Decrease the down time
  • Increase the profit



TRAINING MATERIAL OUTLINE PREVENTIVE & PREDICTIVE MAINTENANCE:

1.    Why Preventive & Predictive Maintenance

  • Apprising maintenance performance and effectiveness
  • Typical maintenance controls
  • Reactive maintenance
  • Anticipative maintenance
  • Ascertainment of equipment condition
  • The need for preventive maintenance
  • Why preventive maintenance
  • Preventive & Predictive Maintenance objectives
  • Preventive & Predictive Maintenance prerequisites
  • Preventive maintenance feasibility analysis
  • Policies
  • PM program functions
  • Cost impact
  • Saving potential

2.    Developing the Preventive & Predictive Maintenance Program

  • Assignment of organizational responsibilities typical maintenance functional assignments operational concepts
  • Equipment to be included
  • Equipment inventory sheet – examples
  • Equipment numbering concepts
  • The PM work order
  • Developing the inspection sheet
  • ECS rating sheet as cross reference
  • Sample of equipment components
  • Spare parts and material needs
  • Inspection sheet examples
  • Determining the frequency cycle
  • Frequency cycle examples
  • Scheduled frequency overview
  • Developing job safety practices – typical examples
  • Considering manual versus computerization
  • Predictive maintenance can determine maintenance requirement
  • Predictive maintenance and its applied techniques as part of the PM program
  • Vibration analysis
  • Wear particle analyzing
  • Thermography

3.    IMPLEMENTATION OF PREVENTIVE MAINTENANCE PROGRAM

  • Job planning
  • The planning function
  • Planning, Service to do
  • Job planning prerequisite
  • Planners qualifications
  • Duties and responsibilities of planners
  • The hob package
  • Line supervisors qualifications
  • Planning permits Us, to forecast, communicate and measure
  • What job should be planned
  • Time required to perform work…labor content
  • Standard defined
  • Consistency of estimating
  • Estimating methods
  • Work backlog
  • Scheduling of maintenance work
  • PERT and CPM as scheduling tools
  • Loading of the PM work order
  • Load leveling
  • Weekly scheduling
  • Manpower requirements forecasting
  • Forecasting by crew
  • Forecasting by department
  • Weekly schedule – Computer and manual example
  • Training of personnel

4.    CONTROLLING THE PREVENTIVE PREDICTIVE MAINTENANCE PROCESS

  • Preventive maintenance administration
  • Planned maintenance
  • Special tools and equipment
  • Service user coordination
  • Equipment availability
  • Service user notification – examples
  • Automotive notification – examples
  • Control reporting
  • What should be included
  • Schedule for supervisor
  • Schedule for supervisor service user
  • Overdue for maintenance and service user
  • Missed PM report for maintenance and service user
  • Complete PM’s
  • Summary report of all PM’s completed
  • Listing of all PM’s set-up in program
  • Planning and scheduling index example
  • Assurance of work performed
  • Conformance and auditing
  • Feedback evaluation/corrective action cycle

5.    EXAMINING RESULTS

  • Effectiveness of the preventive maintenance program
  • Refining the PM program
  • 3Correlating preventive maintenance to breakdown maintenance
  • Measuring and appraising the PM program
  • Equipment history
  • Analyzing equipment failures
  • Some relevant maintenance control indices

6.    APPLICATION EXERCISE

  • How to organize, develop and implement a successful preventive maintenance program summary
  • Adapting the PM concept at your location
  • Hands-on exercise


INSTRUKTUR TRAINING PREVENTIVE & PREDICTIVE MAINTENANCE TRAINING

Dr. Ir. Edy Suwondo and Team

Dr. Ir. Edy Suwondo is a lecturer at the Aerospace Engineering Department, Institute Technology of Bandung (ITB) and a member of the Aircraft Design, Operation and Maintenance Research Group, ITB. He has been working in the area of maintenance since 1992. His expertise is in Reliability Centered Maintenance, Reliability Control Program, Maintenance Planning and Life Cycle Costing. He has conducted various research in those area at GMF AeroAsia, Royal Dutch Airlines (KLM), Nusantara Turbine and Propulsion (PT NTP) and Indonesian Aerospace Company (IAe). He involves also in various projects in his research group. Mr. Edy Suwondo received his bachelor degree from the Aerospace Engineering ITB and his doctor degree from Aerospace Engineering, Delft University of Technology (TU Delft), The Netherlands. His doctor research was in the applications of Life Cycle Costing in maintenance area.



VENUE PREVENTIVE & PREDICTIVE MAINTENANCE TRAINING:

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll


TRAINING DURATION

4 days

 

JADWAL TRAINING

  1. 12 Mar 2018-15 Mar 2018
  2. 09 Apr 2018-12 Apr 2018
  3. 07 May 2018-10 May 2018
  4. 26 Jun 2018-29 Jun 2018
  5. 09 Jul 2018-12 Jul 2018
  6. 06 Aug 2018-09 Aug 2018
  7. 10 Sep 2018-13 Sep 2018
  8. 08 Oct 2018-11 Oct 2018
  9. 12 Nov 2018-15 Nov 2018
  10. 10 Dec 2018-13 Dec 2018

 

INVESTMENT PRICE/PERSON PREVENTIVE & PREDICTIVE MAINTENANCE TRAINING:

  1. Rp 8.500.000/person (full fare) or
  2. Rp 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp 7.950.000/person (if there are 3 or more participants from the same company)



FASILITAS TRAINING PREVENTIVE & PREDICTIVE MAINTENANCE :

  1. Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified  instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)

PREVENTIVE & PREDICTIVE MAINTENANCE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PREVENTIVE MAINTENANCE (SCHEDULE & PREDICTIVE MAINTENANCE)

ACARA

12 – 15 Februari 2018 | Rp. 7.950.000/ peserta di Bandung
13 – 16 Maret 2018 | Rp. 7.950.000/ peserta di Bandung
10 – 13 April 2018 | Rp. 7.950.000/ peserta di Bandung
22 – 25 Mei 2018 | Rp. 7.950.000/ peserta di Bandung

Jadwal Training 2018 Selanjutnya …

 

TUJUAN TRAINING PREVENTIVE MAINTENANCE

Setelah pelatihan peserta diharapkan dapat memahami teori dasar tentang program perawatan, mempunyai persepsi yang sama tentang preventive maintenance serta dapat mengaplikasikan di lapangan.

 

MATERI TRAINING PREVENTIVE MAINTENANCE

  1. Pendahuluan (Pengertian perawatan, pentingnya program perawatan, organisasi departemen, konsep dasar pembentukan departemen perawatan).
  2. Perawatan di Industri (Tugas departemen perawatan, pekerjaan-pekerjaan dasar program preventive maintenance, keuntungan diterapkannya program perawatan, prosedur merawatan, kebutuhan sumber daya perawatan).
  3. Preventive Maintenance (Evolusi program perawatan, perencanaan perawatan, sasaran perencanaan perawatan, penentuan masalah, estimasi pekerjaan perawatan, kebutuhan untuk perencanaan perawatan).
  4. Schedule maintenance (Perencanaan awal perawatan berkala, inventarisasi peralatan, data historis mesin, penentuan waktu perawatan).
  5. Kartu Perawatan ( Riwayat mesin, kartu pelumasan, kartu inspeksi alat, instruksi).
  6. Faktor Penunjang Program Perawatan (Daftar fasilitas, daftar rencana perawatan, laporan pekerjaan perawatan).
  7. Sistem Operasi secara manual ( uraian system perawatan, inisialisasi, perintah kerja rutin, perbaikan segera, administrasi perawatan).
  8. Predictive Maintenance (monitoring konsidi mesin, monitoring minyak pelumas, monitoring getaran mesin, monitoring geometris mesin).
  9. Studi Kasus (Pembuatan Program perawatan yang aplikatif yang bisa di terapkan langsung di lapangan).
  10. ALAT PERAGA: Vibrometer, Combi Laser, Alat Uji Geometris Mesin ( Alignment Machine & Misalignment ) Visco Tester.

 

INSTRUKTUR TRAINING PREVENTIVE MAINTENANCE

Ir. M.Munir Fahmi, Dipl.ME.,MT. and Team

 

TEMPAT TRAINING PREVENTIVE MAINTENANCE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

4 days

 

JADWAL TRAINING

  1. 12 Feb 2018-15 Feb 2018
  2. 13 Mar 2018-16 Mar 2018
  3. 10 Apr 2018-13 Apr 2018
  4. 22 May 2018-25 May 2018
  5. 26 Jun 2018-29 Jun 2018
  6. 10 Jul 2018-13 Jul 2018
  7. 31 Jul 2018-03 Aug 2018
  8. 11 Sep 2018-14 Sep 2018
  9. 09 Oct 2018-12 Oct 2018
  10. 13 Nov 2018-16 Nov 2018
  11. 03 Dec 2018-06 Dec 2018

 

INVESTATION PRICE/PERSON  PREVENTIVE MAINTENANCE:

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

 

TRAINING FACILITIES  PREVENTIVE MAINTENANCE

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

PREVENTIVE MAINTENANCE (SCHEDULE & PREDICTIVE MAINTENANCE)

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

MAINTENANCE PLANNING AND SCHEDULING – Confirmed

Acara

22 – 24 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Hotel Ibis, Yogyakarta
27 – 28 Januari 2018 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
29 – 31 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Hotel Ibis, Yogyakarta
03 – 04 Februari 2018 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

19 – 21 Februari 2018 | Rp 6.900.000,- per peserta di Hotel Hotel Ibis, Yogyakarta – CONFIRMED

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI TRAINING MAINTENANCE PLANNING AND SCHEDULING

Maintenance Planning and Scheduling is designed to build competency in Work Control as a primary skill set in the Competency Map for Facilities Maintenance Management. The course will focus on the six phases of work management (work identification, planning, prioritization, scheduling, execution and history capture). Also covered will be: optimizing preventive and condition-monitoring activities, critical equipment analysis and critical spares control, managing shutdowns/turnarounds, emergency response work, and developing meaningful Key Performance Indicators. The objective of this course is to develop a sound understanding of work control so that delegates’ work management systems can be improved and streamlined to gain the results of higher productivity, greater equipment/process reliability, and lower operational costs. Critical issues, relevant to the participant’s own experiences, are identified and analyzed to maximize effectiveness and equipment care standards.

 

TUJUAN TRAINING MAINTENANCE PLANNING AND SCHEDULING

  • Employ business process analysis techniques in work control
  • Perform a gap analysis on your work management system
  • Improve the operation and/or implementation of your CMMS
  • Balance resources and manage backlogs
  • Create more useful equipment and work histories

 

MATERI TRAINING MAINTENANCE PLANNING AND SCHEDULING

  1. Work identification
  2. Planning
  3. Prioritization
  4. Scheduling
  5. Execution
  6. Preventive maintenance planning
  7. Predictive maintenance planning
  8. Critical equipment focus
  9. Shutdown/turnaround management
  10. Emergency response

 

METODE TRAINING MAINTENANCE PLANNING AND SCHEDULING

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 27 – 28 Januari 2018
  • 03 – 04 Februari 2018
  • 10 – 11 Februari 2018
  • 17 – 18 Februari 2018
  • 24 – 25 Februari 2018
  • 03 – 04 Maret 2018
  • 10 – 11 Maret 2018
  • 17 – 18 Maret 2018
  • 24 – 25 Maret 2018
  • 31 Maret – 01 April 2018
  • 07 – 08 April 2018
  • 14 – 15 April 2018
  • 21- 22 April 2018
  • 28 – 29 April 2018
  • 05 – 06 Mei 2018
  • 12 – 13 Mei 2018
  • 19 – 20 Mei 2018
  • 26 – 27 Mei 2018
  • 02 – 03 Juni 2018
  • 09 – 10 Juni 2018
  • 30 Juni – 01 Juli 2018
  • 07 – 08 Juli 2018
  • 14 – 15 Juli 2018
  • 21 – 22 Juli 2018
  • 28 – 29 Juli 2018
  • 04 – 05 Agustus 2018
  • 11 – 12 Agustus 2018
  • 18 – 19 Agustus 2018
  • 25 – 26 Agustus 2018
  • 01 – 02 September 2018
  • 08 – 09 September 2018
  • 15 – 16 September 2018
  • 22 – 23 September 2018
  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018

 

 Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING MAINTENANCE PLANNING AND SCHEDULING

Ir. Teguh Pudji Purwanto, MT. and Team

MAINTENANCE PLANNING AND SCHEDULING

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

TOTAL PRODUCTIVE MAINTENANCE

ACARA

13 – 15 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
18 – 19 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
20 – 22 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
25 – 26 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2017 Selanjutnya …

02 – 04 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
06 – 07 Januari 2018 (Weekend 2018) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI TRAINING TOTAL PRODUCTIVE MAINTENANCE

Peningkatan keandalan (reliabilitas) operasi sangat dipengaruhi oleh perawatan dan pemeliharaan mesin dan peralatan secara terpadu, baik perawatan secara prediktive (predictive maintenance) maupun korektif (corective maintenance). Mesin atau alat-alat produksi yang beroperasi secara terus menerus tanpa perawatan akan menyebabkan umur teknis dan ekonomisnya menjadi berkurang. Maka dari itu para teknisi atau bagian maintenance perlu melakukan perawatan secara berkala agar tidak mengurangi produktivitas yang dihasilkan dan tidak mengganggu jalannya proses produksi. Melihat hal tersebut, konsep Total Productivity Maintenance (TPM) dianggap cocok untuk digunakan dalam rangka memaksimalkan produktivitas dari peralatan seumur hidup dan akan memperpanjang umur peralatan.

 

TUJUAN & MANFAAT TRAINING TOTAL PRODUCTIVE MAINTENANCE

Dengan mengikuti training ini diharapkan peserta dapat memahami dan mengaplikasikan manajemen perawatan dan pemeliharaan alat-alat produksi sesuai dengan prosedur kerja secara  efektif dan efisien.

 

MATERI TRAINING TOTAL PRODUCTIVE MAINTENANCE

1. Pengantar dan Konsep dasar

  • Definisi Total Productive Maintenance (TPM)
  • Manfaat Total Productive Maintenance (TPM)

2. Bagaimana pengaplikasian Total Productive Maintenance (TPM)

3. Prosedur dan Proses Total Productive Maintenance (TPM)

  • Basic activities of TPM
  • Implementation and developing TPM
  • Autonomous maintenance
  • Planned Maintenance

4.Pengertian Overall Equipment Effectiveness (OEE) dan bagaimana cara       pengukurannya

5. Studi Kasus dan diskusi

 

PESERTA TRAINING TOTAL PRODUCTIVE MAINTENANCE

Pelatihan ini ditujukan bagi manajer,staff, teknisi, engineering, yang terkait dengan maintenance management di perusahaan.

 

METODE TRAINING TOTAL PRODUCTIVE MAINTENANCE

Presentasi, Diskusi , Brainstorming, Case Study.

 

Jadwal Training 2017

Hotel Ibis Malioboro ,Yogjakarta

  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Jadwal Weekend

Hotel Ibis Malioboro ,Yogjakarta

  • 18 – 19 November 2017
  • 25 – 26 November 2017
  • 02 – 03 Desember 2017
  • 09 – 10 Desember 2017
  • 16 – 17 Desember 2017
  • 23 – 24 Desember 2017
  • 30 – 31 Desember 2017

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 02 – 04 Januari 2018
  • 08 – 10 Januari 2018
  • 15 – 17 Januari 2018
  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 06 – 07 Januari 2018
  • 13 – 14 Januari 2018
  • 20 – 21 Januari 2018
  • 27 – 28 Januari 2018
  • 03 – 04 Februari 2018
  • 10 – 11 Februari 2018
  • 17 – 18 Februari 2018
  • 24 – 25 Februari 2018
  • 03 – 04 Maret 2018
  • 10 – 11 Maret 2018
  • 17 – 18 Maret 2018
  • 24 – 25 Maret 2018
  • 31 Maret – 01 April 2018
  • 07 – 08 April 2018
  • 14 – 15 April 2018
  • 21- 22 April 2018
  • 28 – 29 April 2018
  • 05 – 06 Mei 2018
  • 12 – 13 Mei 2018
  • 19 – 20 Mei 2018
  • 26 – 27 Mei 2018
  • 02 – 03 Juni 2018
  • 09 – 10 Juni 2018
  • 30 Juni – 01 Juli 2018
  • 07 – 08 Juli 2018
  • 14 – 15 Juli 2018
  • 21 – 22 Juli 2018
  • 28 – 29 Juli 2018
  • 04 – 05 Agustus 2018
  • 11 – 12 Agustus 2018
  • 18 – 19 Agustus 2018
  • 25 – 26 Agustus 2018
  • 01 – 02 September 2018
  • 08 – 09 September 2018
  • 15 – 16 September 2018
  • 22 – 23 September 2018
  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018

 

 Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

 LEAD INSTRUKTUR TRAINING TOTAL PRODUCTIVE MAINTENANCE

Rini Darmastiti,MSC,Phd & Tim

 

TOTAL PRODUCTIVE MAINTENANCE

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

 

PREVENTIVE AND PREDICTIVE MAINTENANCE

EVENT

13 – 15 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
18 – 19 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
20 – 22 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
25 – 26 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2017 Selanjutnya …

02 – 04 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
06 – 07 Januari 2018 (Weekend 2018) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI TRAINING MAINTENANCE MANAGEMENT

Provide the participants the theory and practical aspects of preventive and  predictive maintenance technology.

The course will cover topics on maintenance information how preventive and     predictive maintenance management, total productive maintenance, parameter monitoring and analysis,  schedule maintenance,  maintenance budget estimation, and equipments condition monitoring .

 

MATERI TRAINING MAINTENANCE MANAGEMENT

Basic of Productive Maintenance

  • Introduction to Maintenance Management, The Important of Maintenance Management, The Aspects of Maintenance Management, Terminology of Maintenance Management.

Types of maintenance

  • Overhaul Maintenance, Break Down Maintenance, Preventive Maintenance, Predictive Maintenance, Maintenance Procedure , Work Organization Maintenance Division.

Maintenance Planning and Control

  • Maintainability and Reliability, Maintenance Planning,  Work Schedule,  Equipment  Replacement.

Budget Planning and Maintenance Schedule

  • Introduction to  Maintenance Budget, Maintenance Budget Estimation, Strategy and Replacement method, Objective Performance , Availability.

Predictive Maintenance Technique

  • Vibration Monitoring, Thermography,   Tribology, Process Parameters, Visual Inspection, Ultrasonic Monitoring.

Machine Vibrating Monitoring

  • Basic of vibration, vibration characteristic, transducer for vibration, vibration parameter.

 

PESERTA TRAINING MAINTENANCE MANAGEMENT

Technician, Engineer, Supervisor and personnel who work at maintenance and Operation Division

 

METODE TRAINING MAINTENANCE MANAGEMENT

Presentasi, Diskusi , Studi Kasus

Jadwal Training 2017

Hotel Ibis Malioboro ,Yogjakarta

  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Jadwal Weekend

Hotel Ibis Malioboro ,Yogjakarta

  • 18 – 19 November 2017
  • 25 – 26 November 2017
  • 02 – 03 Desember 2017
  • 09 – 10 Desember 2017
  • 16 – 17 Desember 2017
  • 23 – 24 Desember 2017
  • 30 – 31 Desember 2017

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 02 – 04 Januari 2018
  • 08 – 10 Januari 2018
  • 15 – 17 Januari 2018
  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 06 – 07 Januari 2018
  • 13 – 14 Januari 2018
  • 20 – 21 Januari 2018
  • 27 – 28 Januari 2018
  • 03 – 04 Februari 2018
  • 10 – 11 Februari 2018
  • 17 – 18 Februari 2018
  • 24 – 25 Februari 2018
  • 03 – 04 Maret 2018
  • 10 – 11 Maret 2018
  • 17 – 18 Maret 2018
  • 24 – 25 Maret 2018
  • 31 Maret – 01 April 2018
  • 07 – 08 April 2018
  • 14 – 15 April 2018
  • 21- 22 April 2018
  • 28 – 29 April 2018
  • 05 – 06 Mei 2018
  • 12 – 13 Mei 2018
  • 19 – 20 Mei 2018
  • 26 – 27 Mei 2018
  • 02 – 03 Juni 2018
  • 09 – 10 Juni 2018
  • 30 Juni – 01 Juli 2018
  • 07 – 08 Juli 2018
  • 14 – 15 Juli 2018
  • 21 – 22 Juli 2018
  • 28 – 29 Juli 2018
  • 04 – 05 Agustus 2018
  • 11 – 12 Agustus 2018
  • 18 – 19 Agustus 2018
  • 25 – 26 Agustus 2018
  • 01 – 02 September 2018
  • 08 – 09 September 2018
  • 15 – 16 September 2018
  • 22 – 23 September 2018
  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018


Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.9000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING MAINTENANCE MANAGEMENT

Ir. Teguh Pudji Purwanto, MT. and Team



MANAGEMENT MAINTENANCE (PREVENTIVE AND PREDICTIVE MAINTENANCE)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

TPM: TOTAL PRODUCTIVE MAINTENANCE – Half Confirmed

ACARA

09 – 11 Oktober 2017 | Rp 6.400.000,- di Hotel Neo Malioboro, Yogyakarta – HALF CONFIRMED
16 – 18 Oktober 2017 | Rp 6.400.000,- di Hotel Neo Malioboro, Yogyakarta
23 – 25 Oktober 2017 | Rp 6.400.000,- di Hotel Neo Malioboro, Yogyakarta
30 Oktober – 01 November 2017 | Rp 6.400.000,- di Hotel Neo Malioboro, Yogyakarta

Jadwal Training 2017 Selanjutnya …

 

 

Deskripsi Training TPM

Peningkatan keandalan (reliabilitas) operasi sangat dipengaruhi oleh perawatan dan pemeliharaan mesin dan peralatan secara terpadu, baik perawatan secara prediktive (predictive maintenance) maupun korektif (corective maintenance). Mesin atau alat-alat produksi yang beroperasi secara terus menerus tanpa perawatan akan menyebabkan umur teknis dan ekonomisnya menjadi berkurang. Maka dari itu para teknisi atau bagian maintenance perlu melakukan perawatan secara berkala agar tidak mengurangi produktivitas yang dihasilkan dan tidak mengganggu jalannya proses produksi. Melihat hal tersebut, konsep Total Productivity Maintenance (TPM) dianggap cocok untuk digunakan dalam rangka memaksimalkan produktivitas dari peralatan seumur hidup dan akan memperpanjang umur peralatan. Saat ini makna TPM jauh lebih luas daripada sebuah kegiatan pemeliharaan atau operasional produksi manufacturing. TPM adalah sebuah budaya kerja khususnya di bidang manufacturing dan operasional. TPM adalah sebuah“manufacturing tools” yang tetap aplikatif dalam semua kegiatan operasional sejak era Toyota Way hingga Lean Six Sigma.

Materi Training TPM

  1. Pengantar dan Konsep dasar
  • Definisi Total Productive Maintenance (TPM)
  • Manfaat Total Productive Maintenance (TPM)
  1. Bagaimana pengaplikasian Total Productive Maintenance (TPM)
  2. Prosedur dan Proses Total Productive Maintenance (TPM)
  • Basic activities of TPM
  • Implementation and developing TPM
  • Autonomous maintenance
  • Planned Maintenance

4.Pengertian Overall Equipment Effectiveness (OEE) dan bagaimana cara pengukurannya

  1. Studi Kasus dan diskusi

METODE

Presentasi, lecture, studi kasus, tanya jawab, brainstorming, diskusi, Praktek

Peserta

Pelatihan ini ditujukan bagi manajer,staff, teknisi, engineering, yang terkait dengan maintenance management di perusahaan dan yang bertanggung jawab menegenai efisiensi perusahaan.

 

Jadwal Training 2017

Hotel NEO Malioboro ,Yogjakarta

  • 09 – 11 Oktober 2017
  • 16 – 18 Oktober 2017
  • 23 – 25 Oktober 2017
  • 30 Oktober – 01 November 2017
  • 06 – 08 November 2017
  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Investasi dan Fasilitas

  • 6.400.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Instruktur

Ir. Teguh Pudji Purwanto, MT and team

TOTAL PRODUCTIVE MAINTENANCE (TPM)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

ROTATING EQUIPMENT: OPERATION, MAINTENANCE AND TROUBLESHOOTING – Confirmed

EVENT

08 – 10 Agustus 2017 | Rp 7.500.000,- di Hotel Fave, Semarang – CONFIRMED
23 – 25 Agustus 2017 | Rp 7.500.000,- di Yogyakarta
05 – 07 September 2017 | Rp 7.500.000,- di Yogyakarta

 

DESKRIPSI TRAINING ROTATING EQUIPMENT

Most of plant’s equipments are rotary. Therefore, understanding the principles of rotating equipments is very essential. Identification of failure modes and monitoring methods of failure symptom are important as well, for establishing the most effective maintenance program. This course begins with discussing the definition of rotating equipments, their types and their primary functions, as well as the general characteristics of rotating equipments in relation with their performance. Then, a detailed discussion on primary rotating equipments, namely pumps, compressors, turbines and fans/blowers, will be given. The discussion includes the classification for each type, the performance characteristics and the frequent failure modes. This course is closed with a procedure to conduct alignment of axles and predictive maintenance for rotating equipments

TUJUAN TRAINING ROTATING EQUIPMENT

  • Understand the functions and general characteristics of rotating equipments.
  • Able to evaluate the performance of rotating equipments.
  • Understand the classification and the performance characteristics of pumps, compressors, turbines and fans/blowers.
  • Able to identify the anomalies and the failure modes of rotating equipments.
  • Able to conduct alignment of axles.
  • Understand the methods to implement predictive maintenance for rotating equipment

MATERI TRAINING ROTATING EQUIPMENT

  • Definition of Rotating Equipment, types, functions and general characteristics.
  • Pumps: classification, performance characteristics and frequent failure modes
  • Compressors: classification, performance characteristics and frequent failure modes.
  • Turbines: classification, performance characteristics and frequent failure modes.
  • Fan/ Blowers: classification, performance characteristics and frequent failure modes.
  • Alignment of axles.
  • Summary of rotating equipment’s failure modes.
  • Predictive maintenance for rotating equipments.
  • Method for test performance of the equipment
  • Equipment installation requirement
  • Equipment log book
  • Operation manual & parts book
  • Software for operation & maintenance
  • Pedestal Crane
  • Geometric Dimensional Measurement Techniques
  • Studi Kasus

PESERTA TRAINING ROTATING EQUIPMENT

  • Engineers / Equipment’s Operators
  • Maintenance / Workshop technicians
  • Quality Control engineers.
  • Process & Manufacturing / Engineer
  • Other professional who wants to have a better understanding and take advantage from the course

METODE TRAINING ROTATING EQUIPMENT

Kegiatan pelatihan dirancang agar peserta dapat memahami secara komprehensif materi yang disampaikan, sehingga dapat dimplementasikan secara aplikatif dalam dunia kerja. Adapun metode yang digunakan adalah:

  1. Presentation
  2. Discuss
  3. Case Study
  4. Evaluation

INSTRUKTUR TRAINING ROTATING EQUIPMENT

Ir.Agus Jayatun, MT and Team

WAKTU & TEMPAT TRAINING ROTATING EQUIPMENT

  • 8 – 10 Agt 2017
  • 23 – 25 Agt 2017
  • 5 – 7 Sept 2017
  • Hotel Fave Semarang
  • Pukul 08.30-16.00

Request for Training Venue: Semarang, Solo, Bandung, Jakarta, Balikpapan, Surabaya, Jogja, Lombok, Malang, Makassar and Batam

In House Training Depend on request

INVESTASI

  • Course Fee : Rp. 7.500.000,-/participant (non residential)
  • Special Price : Rp. 6.000.000,-/participant (non residensial) Min. 2 Peserta dari perusahaan yang sama

FASILITAS

  1. Training Hand Out
  2. Digital Material
  3. Certificate
  4. Exclusive Souvenir
  5. Qualified Bag
  6. Training Photo
  7. Training room with full AC facilities and multimedia
  8. Once lunch and twice coffee break every day of training
  9. Qualified Instructor

ROTATING EQUIPMENT: OPERATION, MAINTENANCE AND TROUBLESHOOTING

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days