Tag Archives: PIPELINE

CORROSION CONTROL AND MONITORING

Acara

18 – 21 December 2017 | Rp 8.750.000/person di Bandung


 

INTRODUCTION :

Corrosion control and monitoring course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.



PRE-REQUISITE
:

NONE. No previous training in corrosion control is required. However, to gain the most from this course, a basic understanding of physics, chemistry and basic unit operations will be helpful.



TRAINING MATERIAL OUTLINE :

  1. Review of oil & gas surface production facility and operations.
  2. Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
  3. Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
  4. Uniform, galvanic and localized corrosion failures.
  5. Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
  6. External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
  7. External corrosion of topside structure caused by marine atmosphere.
  8. Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
  9. Corrosion control and prevention with painting & coatings and the cathodic protection.
  10. Measurement of corrosion potential and corrosion current.
  11. Protection with sacrificial anode and impressed current.
  12. Understanding NACE Standard RP-01-69 to stop external corrosion attack.
  13. Requirement, design and criteria of cathodic protection.
  14. Sacrificial anode specification, installation and construction.
  15. Testing, monitoring, and inspection of cathodic protection.
  16. Inspection and maintenance of transformer-rectifier and sacrificial anode.
  17. Field test, measurement techniques and instrument.
  18. Data recording and evaluation of cathodic protection system.
  19. Case studies of corrosion control and prevention with cathodic protection.
  20. Internal corrosion problem in the pipeline and surface facility.
  21. Oil/gas/water fluid properties and the corrosion tendency.
  22. Deterioration by H2S, CO2, and acidic corrosive components.
  23. Pipeline leakage and rupture by microbial induced corrosion.
  24. Corrosion caused by SRB and the pitting mechanism.
  25. Corrosion caused by oxygen penetration.
  26. Examples and case studies of equipment corrosion damage and pipeline leakage.
  27. Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
  28. Practical internal corrosion monitoring methods.
  29. Access fittings, corrosion coupon and corrosion probes.
  30. Practical internal corrosion control and prevention methods.
  31. Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
  32. Dosage and injection methods of corrosion inhibitors.
  33. SRB control with biocides and the selection of suitable and low risk biocide formula.
  34. Dosage and injection methods of biocides.
  35. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
  36. Dosage and injection methods of oxygen scavenger.
  37. Safety in the use of chemicals for internal corrosion prevention.
  38. Review of gas dehydration process and operations.
  39. Internal corrosion problem in glycol contactor (dehydration) unit.
  40. Method and materials use to control the corrosiveness of rich glycol solution.
  41. Review of amine sweetening process and operations.
  42. Internal corrosion problem in amine sweetening unit.
  43. Method and materials use to control the corrosiveness of rich amine solution.
  44. Examples and case studies of internal corrosion control



TRAINING INSTRUCTOR

Ir. Hilman Ahmad, DCE

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.



VENUE
:

Bandung (Golden Flower, Banana Inn, Grand Seriti, Carrcadin, Amaroossa, Grand Serela, Gino Feruci, Verona Palace, Malaka, Zodiac Taurus)



TRAINING DURATION
:

4  days

 


INVESTATION PRICE/ PERSON
:

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

 

 

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Bag
  7. Training Photo
  8. Training room with Full AC facilities and multimedia
  9. Lunch and twice coffeebreak every day of Corrosion control training
  10. Qualified Instructor
  11. Transportation for participants from hotel of participants to/from hotel of training – VV (if minimal participants is 4 persons from the same company)



RECOMMENDATION TO PARTICIPANTS
:

Participants are recommended to bring laptop for practice sessions

 

INTERNAL AND EXTERNAL CORROSION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPING & PIPELINE SYSTEM

Acara

20 – 23 November 2017 | Rp. 8.500.000/peserta di Bandung
04 – 07 Desember 2017 | Rp. 8.500.000/peserta di Bandung

 

OBJECTIVE

After completion of training, participants will

  • Having knowledges more expanded in Piping and pipeline.
  • Understanding parameters which determining of design.
  • Be able to do material selection
  • Understanding the fabrication ways of components and testing.
  • Be able to handle critical problems related to piping and pipeline

 

WHO SHOULD ATTEND THIS TRAINING?

  • Piping and Pipeline Engineers
  • Operation Engineers
  • Maintenance Engineers
  • Production Engineers
  • Technical Supports Engineers
  • Technical Staffs
  • Everyone who want to know and have interest in piping and pipeline system

 

PIPING & PIPELINE SYSTEM MATERIAL OUTLINE:

A.    Piping Design

  • Design Concept of Pipeline based on ASME B31.1 and ASME B31.3
  • Line Pipe Material Selection
  • Piping Fabricationa and Inspection
  • Mechanics of Fluids / Hydraulics Calculation and Piping Diameter Selection
  • Internal Pressure, Stress Analysis and Piping Thickness Determination
  • Plastic Deformation Analysis
  • Thermal Expansion Analysis
  • Vibration and Fatigue Analysis of the Piping
  • Piping Isometric, PFD and P&ID Basic Concept

B.    Pipeline Design

  • Design Concept of Pipeline based on ASME B31.4 and ASME B31.4
  • Line Pipe Material Selection
  • Pipeline Fabricationa and Inspection
  • Gas and Oil Hydraulics Calculation and Pipeline Diameter Selection
  • Internal Pressure, Stress Analysis and Pipeline Thickness Determination
  • Plastic Deformation Anallysis
  • Thermal Expansion Analysis
  • Free Span Analysis
  • vibration and Fatigue Analysis of the Pipeline
  • Coating and Cathodic Protection Design

C.    Piping and Pipeline Components

  • Valves Criteria and Sizing Selections
  • Flanges and Elbow
  • Connector, Supports and Other Junctions
  • Piping Insulator and Coating Selection
  • Metering and Instrumentation System

 

TRAINING INSTRUCTOR

Dr. Ahmad Taufik, M.Eng.
Dr.Ahmad Taufik,M.Eng. is Risk and Integrity Specialist, and  Chairman for Indonesian Society for Reliability (ISR). He got his doctorate program from Georgia Institute of Technology, Atlanta, USA (1996). He is now also a lecturer at Graduate Study Program at Bandung Institute of Technology (ITB) teaching for risk and integrity assessment related courses. He has been interacting with oil and gas companies for more than 10 years for training, consultant and project implementation. This much experiences in oil and gas industries will be shared by him in training class. Dr. Ahmad Taufik has much work experiences joining in some institution such as at Lloyd’s Register as Operation Manager PT. Surveyor Indonesia and PT. AT Solusi as consultant and trainer. And at present Dr. Ahmad Taufik is an Asset Integrity Specialist for PT Pertamina PHE-ONWJ (formerly BP West Java, Indonesia). He has performed in depth study in integrity  research for pipeline, mechanical and pressurized system. He is member of ASM and ASME. He has wide interest including RBI, PIM, FTA, FMECA, RCA, RAM study and many other risk engineering areas. Dr. Ahmad Taufik has been chairman and speakers for many Oil and Gas International Conferences in Indonesia, (INDOPIPE, MAPREC), Malaysia (ASCOPE), Singapore and China (IPTEC) for the last five years. He has taught many training class on his expertise topics for many companies in Indonesia.

VENUE :

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

 

TRAINING DURATION 

5 days

 

TRAINING TIME 

  1. 20 Nov 2017-23 Nov 2017
  2. 04 Dec 2017-07 Dec 2017

 

HARGA INVESTASI/PESERTA :

  1. 8,500,000/peserta (bayar penuh) atau
  2. 8,250,000/peserta (early bird, yang membayar 1 minggu sebelum training) atau
  3. 8,000,000/peserta (peserta bergroup yang terdiri dari 3 peserta atau lebih dari 1 perusahaan yang sama)

 

FACILITIES FOR PARTICIPANTS 

  1.   Training Module
  2. Training CD Contains Training Material
  3. Certificate
  4.  Stationeries: NoteBook and Ballpoint
  5.  Jacket or Waistcoat or T-Shirt
  6. Bag or Backpackers
  7. Training Photo
  8. Training Room with Full AC Facilities and multimedia
  9. Once lunch and twice coffeebreak every day of training
  10. Qualified and experienced instructor
  11. Transportation for participants from hotel of participants to/from venue of training(if minimal number of participants from one company is 4 persons)


PIPING & PIPELINE SYSTEM: DESIGN, SPECIFICATION, INSTALLATION & MAINTENANCE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PROCESS PIPING & PIPELINE SYSTEM

Acara

16 – 19 Oktober 2017 | Rp. 7.950.000/person di Yogyakarta
28 November – 01 Desember 2017 | Rp. 7.950.000/person di Yogyakarta
04 – 07 Desember 2017 | Rp. 7.950.000/person di Yogyakarta



DESKRIPSI & TUJUAN
TRAINING :

Pelatihan process piping & pipeline system ini dibuat untuk menghasilkan skill dan pemahaman komprehensif tentang proses perpipaan dan sistem jaringan pipa. Setelah mengikuti pelatihan ini, peserta diharapkan dapat mengembangkan pengetahuan dan kemampuan yang diperlukan didalam pengendalian perpipaan, perlindungan pada korosi sistem jaringan pipa, mengembangkan kemampuan didalam memahami dan mengevaluasi hasil dari chemical injection dan peralatan pressure release.


 

CAKUPAN MATERI TRAINING PROCESS PIPING & PIPELINE:

  1. Specification and standard of process piping & pipeline system
  2. Piping, pipeline operation & basic technical calculation
  3. Erotion and corrosion problem in piping and pipeline system
  4. Technical aspect of chemical injection into process and tranportation pipeline system
  5. Access fitting assembly for chemical injection and fluid sampling
  6. Safety equipment / pressure release device
  7. Introduction of stress analysis
  8. Latihan, Diskusi dan tanya jawab



SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?
:

Beberapa kategori para profesional yang dapat mengikuti kursus :

D3 atau SLTA yang berpengalaman kerja minimal 3 tahun atau setara sebagai teknisi, operator, foreman supervisor produksi dan supervisor pipeline.



INSTRUKTUR

Ir. Y. Agus Jayatun, MT.,IPP. And Team

Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

VENUE :  

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

TRAINING DURATION :  

4 hari

 TRAINING TIME:

  • 16 Oct 2017-19 Oct 2017
  • 28 Nov 2017-01 Dec 2017
  • 04 Dec 2017-07 Dec 2017

 

INVESTATION PRICE/PERSON :

  1. Rp 7.950.000/person (full fare)  or
  2. Rp 7.750.000/person (early bird, payment 1 week before training)  or
  3. Rp 7.500.000/person (if there are 3 or more participants from the same company)

FACILITIES TRAINING PIPING & PIPELINE SYSTEM :

  1. Modul Training Process Piping & Pipeline System
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

PROCESS PIPING & PIPELINE SYSTEM

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPELINE FOR NON PIPELINE

Acara

03 – 06 Oktober 2017 | Rp. 7.950.000/person di Yogyakarta
13 – 16 November 2017 | Rp. 7.950.000/person di Yogyakarta
12 – 15 Desember 2017 | Rp. 7.950.000/person di Yogyakarta

 

 

DESKRIPSI & TUJUAN TRAINING PIPELINE FOR NON PIPELINE :

Pipeline atau perpipaan merupakan salah satu peralatan utama di dalam industri baik industri petrokimia, perminyakan dan gas, pertambangan dan lain-lain. Komponen utama perpipaan adalah pompa/kompresor dan jaringan pipa, sementara komponen-komponen bantu adalah katub-katub dan strainer (block valve, control valve, strainer, foot valve, dll), fiting (elbow, tee, reducer, inducer, dll) dan berbagai alat bantu lain yang diperlukan. Selain komponen utama dan bantu, perpipaan masih dilengkapi dengan beberapa instrumen misalnya instrumen alat ukur.

Unjuk kerja perpipaan mempunyai pengaruh yang sangat signifikan terhadap unjuk kerja proses. Unjuk kerja perpipaan sangat dipengaruhi oleh proses perencanaan (design), cara mengoperasikan (operation) dan perawatan (maintenance).

Kursus ini membahas dasar-dasar teknik perpipaan sehingga mudah diikuti oleh mereka yang sehari-hari tidak secara khusus berkecimpung di bidang pipeline.

 

CAKUPAN MATERI TRAINING PIPELINE FOR NON PIPELINE :

1. Pendahuluan : transportasi fluida cair dan gas di dalam pipa, aturan dan standard.

  • Egineering units : mass, length, time, velocity, floww, pressure, head, stress.
  • Hukum kontinuitas aliran fluida atau gas
  • Reynold Number, laminar and turbolent flow
  • Bernoulli equation
  • Moody Diagram
  • Hanzen-William Diagram
  • Major losses
  • Minor losses

2. Pipe standard material and design : ASTM

3. Instrumen pada perpipaan :

  • flow meter
    • venturi
    • orrifice
    • turbine
  • alat ukur tekanan
    • Bourdon type
    • Water coulomn type
    • Membrame type
  • thermometer

4. Valve and fitting : Gate valve, butterfly valve, check valve, control valve, pipe fitting.

5. Jaringan pipa bertekanan : ASME B31

6. Jaringan pipa distribusi Gas : ASME B31.8

7. Dasar-dasar korosi dan pengendalian

  • Mekanisme korosi pada perpipaan
  • Pencegahan korosi pada perpipaan
  1. Coating
  2. Cathodic protection
    • Sacrifial anode
    • Impressed current

 

INSTRUCTOR :

Ir. Y. Agus Jayatun, MT.,IPP. And Team

Ir. Y. Agus Jayatun, MT.,IPP. Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

 

VENUE :

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

TRAINING DURATION :

4 days

 

 

 WAKTU TRAINING:

  • 03 Oct 2017-06 Oct 2017
  • 13 Nov 2017-16 Nov 2017
  • 12 Dec 2017-15 Dec 2017

 

 

 

INVESTMENT PRICE/PERSON :

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)

 

 

 

FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

 PIPELINE FOR NON PIPELINE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPELINE ENGINEERING

Acara

17 – 20 Oktober 2017 | Rp. 7.950.000/person di Yogyakarta
13 – 16 November 2017 | Rp. 7.950.000/person di Yogyakarta
19 – 22 Desember 2017 | Rp. 7.950.000/person di Yogyakarta

 




DESKRIPSI & TUJUAN
TRAINING:

Pipeline atau perpipaan merupakan salah satu peralatan utama di dalam industri baik industri petrokimia, perminyakan dan gas, pertambangan dan lain-lain. Komponen utama perpipaan adalah  pompa/kompresor dan jaringan pipa, sementara komponen-komponen bantu adalah katub-katub dan strainer (block valve, control valve, strainer, foot valve, dll), fiting (elbow, tee, reducer, inducer, dll) dan berbagai alat bantu lain yang diperlukan. Selain komponen utama dan bantu, perpipaan masih dilengkapi dengan beberapa instrumen misalnya instrumen alat ukur.

Unjuk kerja perpipaan mempunyai pengaruh yang sangat signifikan terhadap unjuk kerja proses. Unjuk kerja perpipaan sangat dipengaruhi oleh proses perencanaan (design), cara mengoperasikan (operation) dan perawatan (maintenance).

Kursus ini membahas dasar-dasar teknik perpipaan baik dari sisi desain, konstruksi dan maintenance.



CAKUPAN M
ATERI TRAINING BASIC PIPELINE ENGINEERING:

  1. Pendahuluan : transportasi fluida cair dan gas di dalam pipa, aturan dan standard.
    1. Egineering units : mass, length, time, velocity, flow, pressure, head, stress.
    2. Hukum kontinuitas aliran fluida atau gas
    3. Reynold Number, laminar and turbolent flow
    4. Bernoulli equation
    5. Moody Diagram
    6. Hanzen-William Diagram
    7. Major losses
    8. Minor losses
  2. Pipe standard material and design : ASTM
  3. Instrumen pada perpipaan :
    1. alat ukur tekanan
      1. Bourdon type
      2. Water coulomn type
      3. Membrame type
    2. flow meter
      1. venturi
      2. orrifice
      3. turbine
    3. thermometer
  4. Valve and fitting : Gate valve, butterfly valve, check valve, control valve, pipe fitting.
  5. Jaringan pipa bertekanan : ASME B31
  6. Jaringan pipa distribusi Gas : ASME B31.8
  7. Dasar-dasar korosi dan pengendalian
    1. Mekanisme korosi pada perpipaan
    2. Pencegahan korosi pada perpipaan
      1. Coating
      2. Cathodic protection
        • Sacrifial anode
        • Impressed current

 



PIPELINE ENGINEERING INSTRUCTOR :  

Ir. Y. Agus Jayatun, MT.,IPP.  And Team

Ir. Y. Agus Jayatun, MT.,IPP.Adalah lulusan dari teknik mesin UGM, dan sekarang Beliau menjadi dosen di Teknik Mesin Sekolah Tinggi Teknologi Nasional Yogyakarta. Pak Agus Jayatun sudah sering menjadi instruktur untuk training-training di bidang kompetensi Beliau, seperti: Centrifugal Pump; Operation and Maintenance, Compressor; Operation and Maintenance, Boiler; Operator Sertification, Maintenance Management, Total Alignment and Balancing, Mechanical Power Transmision, Pipeline design, construction and maintenance, Control Valve, design, operation and maintenance, Rotating Equipment; Operation and Maintenance, Bearing; Design and Maintenance, Lubrication, Vibration analysis and diagnostic, Above Ground Storage Tank, Corrosion Control : Sacrifice Anode, Impressed Current, Galvanizing, Metallurgy for non metallurgic engineers, Metallurgy in Welding, Health, Safety and Environment (HSE). Pak Agus Jayatun juga sudah berpengalaman bekerja di beberapa perusahaan dengan berbagai posisi seperti dari sales engineer, Mechanical and Electrical Site Engineer, M/E. Site Engineer pada Process of Clean Water Instalation, M/E. Site Engineer pada Office Building of PLN, Supervisor M/E Engineer, Mechanical Engineer pada Detail Engineering Design of Non Liquid Waste of Komplek Industri Kulit dan masih banyak yang lainnya. Beliau memiliki beberapa sertifikasi profesional dari PII dalam bidang Plumbing/Piping, Air Conditioning, Indoor Building Transportation, Mechanical, dan electrical.

 



VENUE :

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 



TRAINING DURATION : 

4 days

 TRAINING TIME:

  • 17 Oct 2017-20 Oct 2017
  • 13 Nov 2017-16 Nov 2017
  • 19 Dec 2017-22 Dec 2017

 



INVESTMENT PRICE/PERSON :

  1. Rp. 7.950.000/person (full fare) or
  2. Rp. 7.750.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.500.000/person (if there are 3 persons or more from the same company)



FACILITIES FOR PARTICIPANTS:

  1. Modul Training
  2. Flashdisk Training berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

BASIC PIPELINE ENGINEERING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPELINE INSPECTOR

ACARA

11 – 13 September 2017 | Rp 7.900.000,- per peserta di Hotel Ibis, Yogyakarta
18 – 20 September 2017 | Rp 7.900.000,- per peserta di Hotel Ibis, Yogyakarta
25 – 27 September 2017 | Rp 7.900.000,- per peserta di Hotel Ibis, Yogyakarta
02 – 04 Oktober 2017 | Rp 7.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2017 Selanjutnya …

 

Deskripsi Training Pipeline Inspector

Seni desain dan konstruksi sistem perpipaan dan pipa jika dilihat kembali ke peradaban paling awal. Kemajuannya mencerminkan evolusi stabil budaya di seluruh dunia, kebutuhan pengembangan pertanian, pertumbuhan kota-kota, revolusi industri dan penggunaan tenaga uap, penemuan dan penggunaan minyak, perbaikan dalam pembuatan baja dan teknologi pengelasan, penemuan dan penggunaan plastik, pertumbuhan yang cepat dari industri kimia dan listrik, dan meningkatnya kebutuhan untuk jaringan pipa air, minyak dan gas yang dapat diandalkan. Namun, banyak akibat yang dialami jika sistem pipa terkendala mulai dari rugi secara materi, waktu, financial yang lumayan besar bahkan kerugian jiwa. Oleh sebab itu melalui training ini akan dibahas mengenai penjaminan mutu dan operasional yang konsisten, berkesinambungan serta pengoptimalisasian sistem pipa.

Tujuan Training Pipeline Inspector

Setelah selesai mengikuti training ini, peserta diharapkan akan:

  1. Mengerti dan memahami serta dapat mendesain perpipaan
  2. Mampu memahami manufaktur dan pabrikasi perpipaan
  3. Mampu memahami arti penting Pipeline Inspection
  4. Mampu mengidentifikasi masalah dalam transportasi pipa minyak dan gas.

Materi Training Pipeline Inspector

  1. Introduction of Pipeline
  2. Oil and Gas Flowstream Characteristics
  3. Materials, Equipment and Facilities
  4. Pipeline Design
  5. Pipeline Inspection
    • Material
    • Non konformasi
    • Lingkup Inspeksi
  6. Pipeline Construction and Instalation
  7. Receiving Inspection
  8. Pengangkutan, penyimpanan, perlindungan.
  9. Maintenance
  10. Quality Control of Inspections
  11. Studi kasus

Peserta Training Pipeline Inspector

Tenaga teknis dan non-teknis perusahaan minyak dan gas bumi yang terlibat dalam desain, pemilihan, penanganan, instalasi, operasi dan pemeliharaan minyak hulu dan hilir dan gaspipelines dan / atau pipa industri dan mereka yang bertanggung jawab dalam stabilitas minyak dan gas melalui sistem perpipaan serta Lulusan D3 atau Lulusan S1 Teknik fresh graduate

Metode Training Pipeline Inspector

Presentasi, diskusi, dan studi kasus

Jadwal Training Pipeline Inspector

Hotel Ibis Malioboro ,Yogjakarta

  • 11 – 13 September 2017
  • 18 – 20 September 2017
  • 25 – 27 September 2017
  • 02 – 04 Oktober 2017
  • 09 – 11 Oktober 2017
  • 16 – 18 Oktober 2017
  • 23 – 25 Oktober 2017
  • 30 Oktober – 01 November 2017
  • 06 – 08 November 2017
  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Investasi dan Fasilitas Training Pipeline Inspector

  • 7.900.000 (Non Residential, Belum Termasuk Pajak)
  • VIP training 9.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

Lead Instruktur Training Pipeline Inspector

Murono Haryanto, ST dan team

PIPELINE INSPECTOR

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPING AND PIPELINE NETWORK

Acara

17 – 20 April 2017 | Rp 8.500.000/person di Yogyakarta
15 – 18 Mei 2017 | Rp 8.500.000/person di Yogyakarta
12 – 15 Juni 2017 | Rp 8.500.000/person di Yogyakarta
17 – 20 Juli 2017 | Rp 8.500.000/person di Yogyakarta

Jadwal Selanjutnya …

 

 




CAKUPAN MATERI TRAINING :

  1. Overview codes for design and construction piping and Pipeline(As per code ASME B 31.1,  ASME B 31.3, B 31.4 and B 31.8).
  2. Engineering Design of Piping in the Indutrial Plants.
  3. Engineering Design of Pipeline
  4. Fluid Mechanics of  Piping Networks
  5. Fluid flow in Complex Piping Networks
  6. Hidraulic Analysis for Liquid Distribution.
  7. Hidraullic Analysis for Gas Transmission.
  8. Engineering Sofwares for Hidraullic Analysis of  Piping and

 


INSTRUKTUR TRAINING
:

Ir.  Joko Waluyo,MT., Ph.Dand team

 



VENUE :

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

 

TRAINING DURATION : 

4 days

TRAINING TIME 

  1. 17 Apr 2017-20 Apr 2017
  2. 15 May 2017-18 May 2017
  3. 12 Jun 2017-15 Jun 2017
  4. 17 Jul 2017-20 Jul 2017
  5. 21 Aug 2017-24 Aug 2017
  6. 18 Sep 2017-21 Sep 2017
  7. 16 Oct 2017-19 Oct 2017
  8. 13 Nov 2017-16 Nov 2017
  9. 18 Dec 2017-21 Dec 2017

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)


FASILITAS UNTUK PESERTA :

  1. Modul Training
  2. Flashdisk berisi materi training
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10. Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

 

 

HYDRAULIC ANALYSIS FOR PIPING AND PIPELINE NETWORK

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

 

PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

ACARA

11 – 13 April 2017 | Rp 6.000.000 di Yogyakarta
16 – 18 Mei 2017 | Rp 6.000.000 di Yogyakarta
13 – 15 Juni 2017 | Rp 6.000.000 di Yogyakarta
25 – 27 Juli 2017 | Rp 6.000.000 di Yogyakarta

Jadwal Selanjutnya …


 

DESKRIPSI TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Pelatihan ini menjelaskan langkah-langkah dan pemahaman tentang pentingnya perawatan rutin dalam perpipaan, karena pemahaman berdasarkan rincian kualitatif, perhitungan, dan teknik sangat penting dalam mendukung keputusan yang kompeten. Pelatihan ini ditujukan untuk menyoroti metode yang digunakan dalam desain pipa (Pipeline Design) dan juga akan melihat ke dalam prosedur apa yang digunakan untuk memelihara dan merehabilitasi jaringan pipa, concentrating on Sewers. Kursus ini juga akan melihat analisis jaringan pipa dan berbagai fenomena dalam pipa

Dalam pelatihan ini akan dibahas pula mengenai persyaratan dalam mendesain untuk proses sistem perpipaan dan persyaratan yang harus dipenuhi terhadap sistem pemeliharaannya. Pelatihan ini menyajikan beberapa contoh kasus yang akan menstimulus peserta sebagai bahan latihan untuk dapat melakukan aplikasi praktis dengan prosedur yang tepat, sampai pada menemukan solusinya.

Program Pipeline ini dirancang untuk memberikan gambaran yang lengkap dan up-to-date dalam Teknologi Proses Perpipaan. Ini mencakup persyaratan Kode dari desain melalui start-up dari sistem perpipaan baru, serta standar untuk inspeksi dan perbaikan sistem perpipaan yang telah ada, sebagaimana diatur dalam API 570, Piping Inspection Code dan API 579 Fitness for Services. Topik umum dalam pelatihan ini meliputi: Gambaran singkat tentang kode ASME B 31.3, desain tekanan dalam komponen perpipaan, pemilihan flensa, pertimbangan fleksibilitas, material, pengujian dampak, fabrikasi, pemeriksaan dan pengujian. Selanjutnya akan diberikan konsep dan metode untuk menjamin integritas mekanik sistem perpipaan yang ada, yang menyajikan pemahaman menyeluruh tentang bagaimana metodologi API 570 serta API 579 dapat diterapkan untuk menilai integritas struktural komponen perpipaan, dan memutuskan untuk melanjutkan pemakaian. Hal ini juga menunjukkan langkah-langkah perbaikan untuk mitigasi kerusakan dan dengan demikian memperpanjang umur Sistem Perpipaan.

Melalui program pelatihan ini peserta akan mempelajari cakupan kode dan standar, analisis desain, pengelasan dan inspeksi, mekanisme korosi, fitness-untuk-layanan dan analisis kegagalan, dan gambaran seleksi katup dan aplikasi. Hal tersebut adalah fitur dasar teknis pipa dan peraturan desain kode pipa untuk kondisi operasi normal dan occasional loads dan membahas prinsip-prinsip dasar dari material, desain, fabrikasi, pengujian dan korosi, dan efeknya pada integritas sistem. Peserta akan memahami prinsip-prinsip yang akan membantu membangun keseimbangan antara produksi, keamanan biaya, dan integritas perpipaan dan sistem perpipaan.

 

TUJUAN TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Tujuan dari pelatihan Pipeline ini adalah:

  • Peserta akan memperoleh pengetahuan yang mendalam tentang pipa dan spesifikasi material yang tepat, manufaktur, proses fabrikasi dan pengaruhnya terhadap kekuatan dan ketangguhan propeti mekanikal, untuk membantu dalam pemilihan material dan failure analysis. Selanjutnya peserta akan memahami dan memastikan integritas struktural total dari sistem perpipaan, pengolahan, dan manfaatnya
  • Peserta dapat memahami latar belakang teknis untuk formula desain, dan aplikasi untuk desain sistem perpipaan dan pipa. Kursus ini membahas aturan praktek yang tepat dalam tata letak sistem perpipaan untuk pengoperasian yang handal
  • Untuk membiasakan peserta dengan konsep utama, dari kode B 31.3, memahami apakah kode ASME B31.3 telah diterapkan dengan benar ataukah belum, dan memberikan kepada peserta langkah-langkah pendekatan dalam penggunaan B 31.3 kode untuk Desain, fabrikasi, inspeksi instalasi, dan pengujian, sehingga persyaratan desain dari Kode ASME B 31.3 dapat didiskusikan dan diterapkan dengan baik.
  • Peserta dapat mencapai tingkat yang lebih tinggi dalam melakukan pemeliharaan yang unggul dalam proses kegiatan industri, dapat melakukan sertifikasi pengujian tekanan, mengetahui tentang inspeksi pipa, teknik mengevaluasi dan menganalisis data Inspeksi, dan dapat mengetahui bagaimana menghitung laju korosi, interval inspeksi dan parameter yang sama pada  inspeksi pipa.
  • Peserta dapat memeriksa dan menerapkan persyaratan pemeliharaan dan pemeriksaan API 570 untuk sistem perpipaan.
  • Peserta dapat memperoleh pemahaman praktis tentang pipa dan pipa modus kegagalan, mekanisme korosi, mulai tahap pengenalan, mengklasifikasikan, sampai pada penyelesaiannya.
  • Peserta dapat mempelajari modus kerusakan sistem perpipaan dan pipa, serta mempelajari mengenai penilaian risiko dan konsekuensi yang akan dihadapi jika kegagalan (dalam pipa) terjadi
  • Peserta akan diperkenalkan dengan teknik terbaru dan penelitian dalam pipa dan pipa integritas untuk menganalisis kondisi terdegradasi baik kerusakan yang disebabkan karena korosi atau mekanis, serta dapat mengenali penyebab degradasi in-service, dan menerapkan teknik analisis integritas untuk membuat run-perbaikan-ganti keputusan. Dengan kata lain dapat mempelajari metode yang tepat dalam melakukan perbaikan, perubahan dan rerating
  • Peserta dapat melakukan desain audit engineering dengan prosedur yang tepat

 

MATERI TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Materi yang akan disampaikan dalam pelatihan Pipeline ini yaitu:

1. Pengantar

  • Sejarah Teknologi Pipeline
  • Pengantar Piping Codes, Kode & Standar ASME B 31.3
  • Standar API
  • Standar NACA, MSS-SP, PFI
  • Dasar-dasar Integritas dan Pemeliharaan
  • Kategori Fluid Services
  • Pressure Design of Pipes & Design of Blanks
  • Studi kasus tentang pendesainan Pipa
  • Branches and reinforcements

2. Seleksi Material

  • Aspek Praktis Properti Metalurgi
  • Chemistry and Material Test Reports
  • Pengaruh manufaktur dalam perpipaan
  • Fabrikasi dan spesifikasi Fittings1
  • Persyaratan Material Pipa
  • Mechanical Properties: Kekuatan dan Ketangguhan
  • Teknik Pemilihan Material

3. Pengelasan

  • Pengantar: Pipe and Pipeline Welding Practice, Fabrikasi dan pengelasan
  • Persyaratan API 1104 dan ASME IX
  • Welding in-service: Tantangan dan Solusi

4. Strength Integrity for Sustained Loads

  • Operating and Design Pressure
  • Cara Menentukan Sistem Tekanan Desain
  • Introduction to Pressure Relief Valves
  • Formula pengukuran Pipa dan Pipeline beserta aplikasinya
  • Aturan Praktek yang Baik dalam layout
  • Pompa dan Piping Compressor
  • Bagaimana Mendukung Sistem perpipaan
  • Ulasan tentang support types beserta aplikasinya
  • Lesson learned from Poor Support Practices
  • Efek Temperatur (Suhu)
  • Flexibility Layout Analysis
  • Temperature Transients and Fatigue Damage
  • Vibration In Service
  • Mechanical and Hydraulic Induced Vibration in Piping
  • How to Measure Analyze Resolve Vibration
  • Persyaratan Dampak pengujian
  • Preheating dan PWHT
  • Inspeksi, Pemeriksaan dan Pengujian
  • NDT Sistem Perpipaan
  • Tekanan pengujian pipa
  • Pipa Ekspansi Thermal
  • Flensa ASME B 16.5
  • In-service Degradasi pipa

5. Strength Integrity for Occasional Loads

  • Tekanan Transien
  • Recognizing and Solving Liquid Hammer
  • Pump Station Transients
  • Studi Kegagalan Pipeline Karena Transient
  • Dua-Fase Cair-Vapor Transien
  • Dua-Fase Cair-Gas Transien
  • Gas Discharge Transients
  • Buried Pipe
  • Soil Loads & Surface Loads
  • Expansion of Buried Pipe
  • Soil settlement
  • Kegagalan dalam Pipeline
  • Study Kasus (dalam sejarah)
  • Pemahaman bagaimana bisa terjadi kegagalan dan cara mengatasinya

6. Penilaian dan Perlindungan terhadap Korosi

  • Pengantar Korosi Praktis
  • Klasifikasi Mekanisme Korosi
  • Penipisan dinding secara umum
  • Korosi Lokal: Galvanic Efek
  • Celah Korosi
  • Pitting Corrosion
  • Dampak Lingkungan
  • Efek Hidrogen dan H2S
  • Korosi Mikrobologi
  • Perlindungan terhadap Korosi
  • Cathodic Protection Overview

7. Risk Assessment Overview

  • Pengantar risk assessment
  • Risk Criteria
  • API 570 metodologi penilaian Integritas
  • Remaining Life Assesment
  • Probabilitas Kegagalan
  • Third party damage
  • Aspek-Aspek Korosi
  • Aspek-Aspek Pendesainan
  • Pengoperasian yang salah
  • Konsekuensi dari kegagalan
  • Product hazard
  • Spill assessment
  • Dispersion calculation
  • Receptors
  • Risk Representasi
  • Evaluasi data Inspeksi
  • API 579: prosedur penilaian fitness-for service
  • Concept of Remaining strength factor
  • Penilaian general metal loss
  • Penilaian keretakan (crack-like flaws)

8. Pemeliharaan & perbaikan

  • Flange and Mechanical Joints
  • Ikhtisar Berbagai Jenis Flensa dan Aplikasinya
  • Penyebab Kebocoran Flange dan Cara mengatasinya
  • Studi Kasus Kegagalan Flange
  • Assembly of Flange Joints and Leak Tightness
  • Tekanan dan Pengujian Leak
  • Perbedaan Antara Pengujian Leak dan Pengujian Tekanan
  • Ulasan mengenai Difference Testing Techniques
  • Tujuan dari Test Hydro & Cara melakukan Tes Hydro
  • Pengujian Sistem Pipeline dan piping
  • Pneumatic Testing
  • Teknik Perbaikan & Standart Perbaikan : The New ASME
  • Perbaikan dan sistem perubahan perpipaan
  • Pipe retirement thickness
  • Re-rating pipa yang ada
  • Integritas penilaian pipa tertanam
  • The Fundamentals of Repair package
  • Pipa dan Penggantian Komponen
  • Grinding dan pengelasan
  • Welded Sleeve: Tipe A dan B

 

PESERTA TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Pelatihan Pipeline ini sesuai bagi mereka yang terlibat dalam desain, analisis, fabrikasi, instalasi, dan pemeliharaan sistem perpipaan, seperti:

Engineers, chief Engineers, Senior Draftsmen, Maintenance Engineers, Facilities Engineers, Mechanical Engineers, Inspection Engineers, Process Engineers, Design Engineers, Planning Engineers, Operations Engineers, Corrosion Engineers, Structural Engineers, Plant engineers in mechanical reliability programs, structure engineer, plant inspectors, central engineering staff, consultants for refining and petrochemicals, and quality assurance personnel who work in the Chemical, Petroleum, Utilities, Petrochemical Plants, Fertilizer Plants etc.

 

METODE TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

  • Presentation
  • Discussion/Sharing
  • Case Study
  • Evaluation
  • Simulation

 

INSTRUKTUR TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Ir. Rini Dharmastiti, M.Sc, Ph.D & Team

  • Instruktur menyelesaikan program Doktoral dari School of Mechanical Engineering Leed University UK tahun 2001, saat ini menjabat sebagai Tim Ahli Bidang Teknik Dan Penngelola Lab Hidrodinamika Fakultas Teknik Universitas Gajah Mada Yogyakarta.
  • Bidang keahlian yang menjadi kompetensinya adalah Bidang Tribology, Mechanical Integritiy, Piping & Pipeline System, Risk Assessment & RBI, Fittness for Services, Mechanical Design, Solid Mechanics, Stress Analysis, Smart Structures & Advanced, Materials, Contact Mechanics, Impact and Crashworthiness.

 

WAKTU & TEMPAT TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

  • Batch 2 : 07 – 09 Februari 2017
  • Batch 3 : 07 – 09 Maret 2017
  • Batch 4 : 11 – 13 April 2017
  • Batch 5 : 16 – 18 Mei 2017
  • Batch 6 : 13 – 15 Juni 2017
  • Batch 7 : 25  – 27 Juli 2017
  • Batch 8 : 08 – 10 Agustus 2017
  • Batch 9 : 26 – 28 September 2017
  • Batch 10 : 10 – 12 Oktober 2017
  • Batch 11 : 01 – 03 November 2017
  • Batch 12 : 12 – 14 Desember 2017
  • 08.00 – 16.00 WIB
  • Hotel Ibis Malioboro Yogyakarta

In House Training : Depend on request

 

BIAYA TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Rp 6.000.000,- /participant (non residensial)*

 

FASILITAS TRAINING PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

  • Meeting Room di Hotel
  • Module/Materi (hard & soft copy)
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training

 

ADVANCED TECHNOLOGY OF PIPELINE DESIGN, CONSTRUCTION, & MECHANICAL INTEGRITY

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Internal and External Corrosion Control and Monitoring for Pipeline and Surface Facility

ACARA

20 – 23 Februari 2017 | Rp 8.750.000/person di Bandung
28 Februari – 03 Maret 2017 | Rp 8.750.000/person di Bandung
24 – 27 April 2017 | Rp 8.750.000/person di Bandung
15 – 18 Mei 2017 | Rp 8.750.000/person di Bandung

Jadwal Training 2017 Selanjutnya …

 

 

 

INTRODUCTION :

This course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.

Pre-Requisite

NONE. No previous training in corrosion control is required. However, to gain the most from this course, a basic understanding of physics, chemistry and basic unit operations will be helpful.

Course Content

  • Review of oil & gas surface production facility and operations.
  • Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
  • Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
  • Uniform, galvanic and localized corrosion failures.
  • Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
  • External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
  • External corrosion of topside structure caused by marine atmosphere.
  • Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
  • Corrosion control and prevention with painting & coatings and the cathodic protection.
  • Measurement of corrosion potential and corrosion current.
  • Protection with sacrificial anode and impressed current.
  • Understanding NACE Standard RP-01-69 to stop external corrosion attack.
  • Requirement, design and criteria of cathodic protection.
  • Sacrificial anode specification, installation and construction.
  • Testing, monitoring, and inspection of cathodic protection.
  • Inspection and maintenance of transformer-rectifier and sacrificial anode.
  • Field test, measurement techniques and instrument.
  • Data recording and evaluation of cathodic protection system.
  • Case studies of corrosion control and prevention with cathodic protection.
  • Internal corrosion problem in the pipeline and surface facility.
  • Oil/gas/water fluid properties and the corrosion tendency.
  • Deterioration by H2S, CO2, and acidic corrosive components.
  • Pipeline leakage and rupture by microbial induced corrosion.
  • Corrosion caused by SRB and the pitting mechanism.
  • Corrosion caused by oxygen penetration.
  • Examples and case studies of equipment corrosion damage and pipeline leakage.
  • Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
  • Practical internal corrosion monitoring methods.
  • Access fittings, corrosion coupon and corrosion probes.
  • Practical internal corrosion control and prevention methods.
  • Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
  • Dosage and injection methods of corrosion inhibitors.
  • SRB control with biocides and the selection of suitable and low risk biocide formula.
  • Dosage and injection methods of biocides.
  • Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
  • Dosage and injection methods of oxygen scavenger.
  • Safety in the use of chemicals for internal corrosion prevention.
  • Review of gas dehydration process and operations.
  • Internal corrosion problem in glycol contactor (dehydration) unit.
  • Method and materials use to control the corrosiveness of rich glycol solution.
  • Review of amine sweetening process and operations.
  • Internal corrosion problem in amine sweetening unit.
  • Method and materials use to control the corrosiveness of rich amine solution.
  • Examples and case studies of internal corrosion control

Instructor

Ir. Hilman Ahmad,DCE. And Associates

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

WHO SHOULD ATTEND THIS TRAINING ? :

  1. Anyone who needs to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility, in oil and gas surface production facility and pipelines.
  2. Anyone involved in combating and controlling corrosion from internal and external source.
  3. Technicians and field operators and engineers of any discipline.
  4. Onshore / offshore facility and pipeline cathodic protection inspectors.
  5. Onshore / offshore structure painting and coating applicators and inspectors.
  6. Amine sweetening, glycol dehydration and gas processing plant operators.
  7. Beginners who interested in.

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :  

4 days

  JADWAL TRAINING

  1. 20 Feb 2017-23 Feb 2017
  2. 28 Feb 2017-03 Mar 2017
  3. 24 Apr 2017-27 Apr 2017
  4. 15 May 2017-18 May 2017
  5. 05 Jun 2017-08 Jun 2017
  6. 24 Jul 2017-27 Jul 2017
  7. 21 Aug 2017-24 Aug 2017
  8. 25 Sep 2017-28 Sep 2017
  9. 23 Oct 2017-26 Oct 2017
  10. 31 Oct 2017-03 Nov 2017
  11. 18 Dec 2017-21 Dec 2017

HARGA INVESTASI/PESERTA :   

  1. Rp 8.750.000/person (full fare) or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 or more participants from the same company)

 

FACILITIES FOR PARTICIPANTS :

  1. Training Module
  2. Flash Disk contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. T-Shirt
  6. Backpack
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Lunch and twice coffeebreak everyday of training
  10. Qualified instructor
  11. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

Event

13 – 16 Maret 2017 | Rp 8.750.000/person di Bandung
10 – 13 April 2017 | Rp 8.750.000/person di Bandung
02 – 05 Mei 2017 | Rp 8.750.000/person di Bandung
06 – 09 Juni 2017 | Rp 8.750.000/person di Bandung

Jadwal Training 2017 Selanjutnya …

 

 


TRAINING DESCRIPTION AND BENEFITS PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

  • This course is for either corrosion engineers or non corrosion engineering personnel who involve in oil & gas operations and maintenance, pipeline and asset integrity management, pipeline inspection and pigging, material purchasing, chemical selection and injection, hazard and HSE management, and any corrosion related activity.
  • By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about internal corrosion control and monitoring, and understand how to select and use of corrosion inhibitors and chemicals.
  • After completion of this course, participants will understand what internal corrosion is, how to detect, predict and monitor their growth, and how to control these serious problems in the pipeline.

TRAINING HIGHLIGHTS PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

  • Internal Corrosion Problem in the Pipeline
  • H2S, CO2, and Acidic Corrosive Components
  • Sour Corrosion and Microbial Induced Corrosion
  • Equipment and Pipeline Leakage and Rupture by Corrosion
  • Fluid Properties and the Corrosion Tendency
  • Internal Corrosion Monitoring and Corrosion Prediction
  • Internal Corrosion Control and Prevention Methods

TRAINING MATERIAL OUTLINE PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

  1. Oil, condensate, gas, and water flowing in the pipeline
  2. Corrosion in water re-injection system and the injection line
  3. Corrosion in sea water injection system
  4. The role of H2S, CO2, and acidic impurities in the fluid
  5. Nature of H2S corrosion, pitting and stress corrosion cracking
  6. Nature of CO2 corrosion
  7. Sour corrosion and top of line corrosion problems
  8. Microbial induced corrosion mechanism and its related problems
  9. Corrosion caused by SRB and the pitting mechanism
  10. Corrosion caused by oxygen penetration
  11. Examples of corrosion damage and pipeline leakage
  12. Corrosion monitoring methods in oil & gas field
  13. Oil & gas filed corrosion prevention methods
  14. Corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals
  15. Dosage and injection methods of corrosion inhibitors
  16. SRB control with biocides and the selection of suitable and low risk biocide formula
  17. Dosage and injection methods of biocides
  18. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger
  19. Dosage and injection methods of oxygen scavenger
  20. Safety in oil & gas corrosion prevention

TRAINING METHOD, MATERIALS AND PROGRAM

  • The course will be delivered in the form of classroom exposition, case studies and open discussion. Course materials will be handed out as hard and soft copy.
  • The course will be given in Bahasa Indonesia.  In special case, upon request, it will be in English.

INSTRUKTUR TRAINING

Ir.Hilman Ahmad,DCE. and Associates

Ir. Hilman Ahmad, DCE., an Independent Consultant in industrial oil and gas, member of the Society of Indonesian Petroleum Engineers, who manage the Industrial Oil & Gas Education Center for Professionals and has been practicing production operation & safety and corrosion control engineering in Indonesia for more than twenty-five years. He post-graduated from Tokyo Institute of technology (sponsored by UNESCO) in 1977. He joined in-field-practice program at Nippon Kokan Steel Company & Research Center Kawasaki, Japan for production facility design & construction and corrosion prevention & control in 1983, and collaborated with Cormon Industrial Research Center Brighton UK for on-line corrosion monitoring development in 2000.He has been delivering consultative course in production operation, maintenance & safety and corrosion control for personnel from Oil & Gas Company and Petrochemical Industry since 1979.

VENUE :

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll

TRAINING DURATION :  

4 days

  JADWAL TRAINING

  1. 13 Mar 2017-16 Mar 2017
  2. 10 Apr 2017-13 Apr 2017
  3. 02 May 2017-05 May 2017
  4. 06 Jun 2017-09 Jun 2017
  5. 10 Jul 2017-13 Jul 2017
  6. 31 Jul 2017-03 Aug 2017
  7. 11 Sep 2017-14 Sep 2017
  8. 09 Oct 2017-12 Oct 2017
  9. 13 Nov 2017-16 Nov 2017
  10. 12 Dec 2017-15 Dec 2017

INVESTATION PRICE/PERSON :

  1. Rp 8.750.000/person (full fare)  or
  2. Rp 8.500.000/person (early bird, payment 1 week before training) or
  3. Rp 8.250.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS:

  1. Training Module
  2. Training CD contains training material
  3. Certificate
  4. Stationeries: NoteBook and Ballpoint
  5. Jacket or waistcoat
  6. Bag or backpackers
  7. Training Photo
  8. Training room with full AC facilities and multimedia
  9. Qualified and experienced instructor
  10. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

PIPELINE INTERNAL CORROSION CONTROL AND MONITORING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days