Tag Archives: DCS

DCS (DISTRIBUTED CONTROL SYSTEM)

EVENT

17 – 19 April 2018 | Rp 6.000.000 di Yogyakarta
22 – 24 Mei 2018 | Rp 6.000.000 di Yogyakarta
05 – 07 Juni 2018 | Rp 6.000.000 di Yogyakarta
17 – 19 Juli 2018 | Rp 6.000.000 di Yogyakarta

Jadwal Training 2018 Selanjutnya …

 



COURSE OVERVIEW DCS (DISTRIBUTED CONTROL SYSTEM)

This course will cover the practical applications of distributed control systems. Included is the relationship between PLC and the DCS. Further included is the importance of Human Computer Interfaces (HMI) and advanced control strategies, which would not be possible without the application of a computer. This course is non-specific but will include a number of manufacturers DCS systems, such as Honeywell TDC rage. Each delegate will receive a comprehensive course manual. The concept of field buses is introduced with some study of Foundation of assets management as a tool for proactive maintenance systems.
After completing this course, participants will be able to understand the principles of maintenance and troubleshooting of DCS hardware and software, diagnose DCS component status, and also manage and respond to process interface including Operation and Monitoring.



COURSE OBJECTIVES DCS (DISTRIBUTED CONTROL SYSTEM)

The purpose of this training is to give a best practice on a solid understanding of the architecture and operation of Distributed Control Systems (DCSs), ability to design the overall DCS and process control system, improved process performance for your plant, understanding of the key ergonomic issues in design of operator displays, apply advanced control strategies to your plant control system and to get more effective use of your existing DCS process control capabilities.



COURSE CONTENTS DCS (DISTRIBUTED CONTROL SYSTEM)

  • DCS Introduction
  • DCS, PLC, and SCADA comparison
  • Basic DCS Controller Configuration
  • Computer Interfacing
  • Programming of DCS
  • Uninterrupted Automatic Control
  • DCS System & Components
  • Advanced DCS Systems
  • Advanced Control Strategies
  • Box Level Control
  • Field Sensor  and Process Transmitter
  • Instrument Calibration
  • Data Communication System in a DCS
  • The Operator Interface
  • DCS Alarm Management
  • DCS Topology and Configuration
  • Sequence Programs Linked to Control from Data Highway Box Level
  • Practical Examples of Level 2/3 Control
  • Maintenance Considerations
  • Maintenance Requirements of System and System Elements
  • Procedure for Checking Control Loop Calibration
  • IN-built Diagnostics and Maintenance Diagnostic Routines
  • Requirements for Installation of UPS System
  • Advanced Control Strategies
  • Troubleshooting and Maintenance of DCS System



WHO SHOULD ATTEND

This course is dedicated to: Production Operator, Maintenance Technician, Instrument Engineer, Process Production Supervisor, Superintendent or Personnel who want to broaden his knowledge about DCS.



METHODS DCS (DISTRIBUTED CONTROL SYSTEM)

  • Presentation
  • Discuss
  • Sharing
  • Simulation
  • Case Study
  • Evaluation



COURSE LEADER DCS (DISTRIBUTED CONTROL SYSTEM)

Tugino, S.T., M.T. & Team

 

WAKTU & TEMPAT

  • Batch4: 17 – 19 April 2018
  • Batch 5: 22 – 24 Mei 2018
  • Batch 6: 05 – 07 Juni 2018
  • Batch 7: 17 – 19 Juli 2018
  • Batch 8: 07 – 09 Agustus 2018
  • Batch 9: 04 – 06 September 2018
  • Batch 10: 23 – 25 Oktober 2018
  • Batch 11: 13 – 15 November 2018
  • Batch 12: 18 – 20 Desember 2018
  • 08.00 am – 16.00 pm (WIB)
  • Ibis Malioboro Hotel Yogyakarta ; Ibis Styles Hotel Yogyakarta ; Horison Ultima Riss Hotel Yogyakarta

In House Training : Depend on request



TUITION FEE

  • 6.000.000 IDR /participant (non residensial)*


FASILITAS

  • Meeting Room di Hotel
  • Module/Materi (hard & soft copy)
  • Training Kit
  • Coffe Break & Lunch
  • Souvenir
  • Sertifikat
  • Airport pick up services
  • Transportation during training



DCS (DISTRIBUTED CONTROL SYSTEM): OPERATION & MAINTENANCE

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

DISTRIBUTED CONTROL SYSTEM (DCS)

Acara

13 – 15 Februari 2018 | IDR 6.500.000 per peserta di Yogyakarta
20 – 22 Februari 2018 | IDR 6.500.000 per peserta di Yogyakarta
06 – 08 Maret 2018 | IDR 6.500.000 per peserta di Yogyakarta
13 – 15 Maret 2018 | IDR 6.500.000 per peserta di Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

DESCRIPTION DISTRIBUTED CONTROL SYSTEM (DCS)

 Pelatihan distributed control system memberikan pengetahuan dasar tentang sistem pengaturan terdistribusi (distributed control system) yang merupakan suatu pengetahuan dasar teknis yang banyak digunakan dalam suatu proses industri. Kursus ini memberikan gambaran dasar, definisi, teori dasar, perancangan, dan operasi dari suatu sistem kontrol terdistribusi. Penjelasan dalam kursus akan memberikan pengetahuan mengapa perlu distributed control system dalam suatu proses produksi atau proses industri.

 

OUTLINES DISTRIBUTED CONTROL SYSTEM (DCS)

  • Dasar sistem kontrol
  • Dasar Prosess kontrol
  • Process Control Instrumentation and Component
  • Process Control using Minimum System
  • Distributed controlled system fundamental in process control
  • Basic Design and operation distributed control system

 

INSTRUCTOR DISTRIBUTED CONTROL SYSTEM TRAINING

Miftakhul Huda, ST., M.Eng.

 

WHO SHOULD ATTEND?

Perancang, operator, engineer, supervisor, manajer, dan lain-lainnya yang ingin mengetahui/mendalami sistem kontrol terdistribusi

 

METHOD

Lecturing, workshop, interactive discussion, sharing and case study.

 

TIME & VENUE

  • 13 – 15 Februari 2018
  • 20 – 22 Februari 2018
  • 6 – 8 Maret 2018
  • 13 – 15 Maret 2018
  • 20 – 22 Maret 2018
  • 3 – 5 April 2018
  • 10 – 12 April 2018
  • 17 – 19 April 2018
  • 2 – 4 Mei 2018
  • 15 – 17 Mei 2018
  • 22 – 24 Mei 2018
  • 5 – 7 Juni 2018
  • 12 – 14 Juni 2018
  • 19 – 21 Juni 2018
  • 3 – 5 Juli 2018
  • 10 – 12 Juli 2018
  • 17 – 19 Juli 2018
  •  1 – 3 Agustus 2018
  • 14 – 16 Agustus 2018
  • 27 – 29 Agustus 2018
  • 4 – 6 September 2018
  • 18 – 20 September 2018
  • 25 – 27 September 2018
  • 2 – 4 Oktober 2018
  • 9 – 11 Oktober 2018
  • 16 – 18 Oktober 2018
  • 6 – 8 November 2018
  • 13 – 15 November 2018
  • 21 – 23 November 2018
  • 4 – 6 Desember 2018
  • 11 – 13 Desember 2018
  • 18 – 20 Desember 2018

Hotel Ibis Styles Dagen/ Hotel Ayaartta/ Hotel Novotel, Yogyakarta

 

TRAINING DISTRIBUTED CONTROL SYSTEM (DCS) FEE

  • Biaya training IDR 6.500.000 per peserta – Nonresidential, belum termasuk pajak. Pelaksanaan di Yogyakarta minimal peserta 2 orang.
  • Venue training lain: Bandung, Surabaya, Malang, Bali, Lombok, Batam, dengan minimal peserta 4 orang. Biaya investasi – call

 

TRAINING DISTRIBUTED CONTROL SYSTEM (DCS) FACILITIES

  •  Quality Training Modul
  •  Tas Backpack
  •  Stationeries
  •  Sertifikat
  •  Exclusive Polo shirt atau jaket
  •  Flashdisk berisi materi training
  •  2x coffee break dan lunch
  • Training akan running apabila telah tercapai kuota minimal peserta 2 orang.
  • Transportasi Peserta dari Bandara/Stasiun KA ke training venue. (Minimal 2 orang peserta dari perusahaan yang sama)

 

BASIC ENGINEERING DISTRIBUTED CONTROL SYSTEM (DCS)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Distributed Control System (DCS): Method & Analysis

ACARA

13 – 15 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
18 – 19 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
20 – 22 November 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
25 – 26 November 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2017 Selanjutnya …

02 – 04 Januari 2018 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
06 – 07 Januari 2018 (Weekend 2018) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

 

 

DESKRIPSI TRAINING DISTRIBUTED CONTROL SYSTEM

DCS merupakan sistem kontrol yang mampu menghimpun (mengakuisisi) data dari lapangan dan memutuskan akan diapakan data tersebut, secara singkat DCS -> ambil/baca data + lakukan pengontrolan berdasar data tersebut. Data-data yang telah diakuisisi (diperoleh) dari lapangan bisa disimpan untuk rekaman atau keperluan-keperluan masa datang, atau digunakan dalam proses-proses saat itu juga, atau bisa juga, digabung dengan data-data dari bagian lain proses, untuk kontrol lajutan dari proses yang bersangkutan.

 

TUJUAN TRAINING DISTRIBUTED CONTROL SYSTEM

Peserta akan memahami:

  • berbagai jenis alat ukur di lapangan
  • Jenis-jenis kesalahan yang mengikuti proses pengukuran
  •  kesalahan yang muncul akibat sifat material sensor
  • prinsip kerja alat-alat ukur dari berbagai jenis
  • cara kerja dan sifat fisik dari sensor
  • teori dasar pengukuran dan kendali
  • teori dasar statistik dan analisis data

 

MATERI TRAINING DISTRIBUTED CONTROL SYSTEM

  1. Operator Console
    Alat ini mirip monitor komputer. Digunakan untuk memberikan informasi umpan balik tentang apa yang sedang dikerjakan atau dilakukan dalam pabrik, selain itu juga bisa menampilkan perintah yang diberikan pada sistem kontrol. Melalui konsol ini juga, operator memberikan perintah pada instrumen-instrumen di lapangan.
  2. Engineering Station
    Ini adalah stasion2 untuk para teknisi yang digunakan untuk mengkonfigurasi sistem dan juga mengimplementasi algoritma pengontrolan.
  3. History Module
    Alat ini mirip dengan harddisk pada komputer. Alat ini digunakan untuk menyimpan konfigurasi DC dan juga konfigurasi semua titik di pabrik. Alat ini juga bisa digunakan untuk menyimpan berkas-berkas grafik yang ditampilkan di konsol dan banyak sistem saat ini mampu menyimpan data-data operasional pabrik.
  4. Data Historian.
  • Biasanya berupa perangkat lunak yang digunakan untuk menyimpan variabel2 proses, set point dan nilai-nilai keluaran. Perangkat lunak ini memiliki kemammpuan laju scan yang tinggi dibandingkan History Module.
  1. Control Module.
  • Ini seperti otaknya DCS. Disinilah fungsi-fungsi kontrol dijalankan, seperti kontrol PID, kontrol pembandingan, kontrol rasio, operasi-operasi aritmatika sederhana maupun kompensasi dinamik. Saat ini sudah ada peralatan modul kontrol yang lebih canggih dengan kemampuan yang lebih luas.
  1. I/O
    Bagian ini digunakan untuk menangani masukan dan luaran dari DCS. Masukan dan luaran tersebut bisa analog, bisa juga digital. Masukan/luaran digital seperti sinyal-sinyal ON/OFF atau Start/Stop. Kebanyakan dari pengukuran proses dan luaran terkontrol merupakan jenis analog.

 

METODE TRAINING DISTRIBUTED CONTROL SYSTEM

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2017

Hotel Ibis Malioboro ,Yogjakarta

  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Jadwal Weekend

Hotel Ibis Malioboro ,Yogjakarta

  • 18 – 19 November 2017
  • 25 – 26 November 2017
  • 02 – 03 Desember 2017
  • 09 – 10 Desember 2017
  • 16 – 17 Desember 2017
  • 23 – 24 Desember 2017
  • 30 – 31 Desember 2017

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 02 – 04 Januari 2018
  • 08 – 10 Januari 2018
  • 15 – 17 Januari 2018
  • 22 – 24 Januari 2018
  • 29 – 31 Januari 2018
  • 05 – 07 Februari 2018
  • 12 – 14 Februari 2018
  • 19 – 21 Februari 2018
  • 26 – 28 Februari 2018
  • 05 – 07 Maret 2018
  • 12 – 14 Maret 2018
  • 19 – 21 Maret 2018
  • 26 – 28 Maret 2018
  • 02 – 04 April 2018
  • 09 – 11 April 2018
  • 16 – 18 April 2018
  • 23 – 25 April 2018
  • 02 – 04 Mei 2018
  • 07 – 09 Mei 2018
  • 14 – 16 Mei 2018
  • 21 – 23 Mei 2018
  • 30 Mei – 01 Juni 2018
  • 04 – 06 Juni 2018
  • 25 – 27 Juni 2018
  • 02 – 04 Juli 2018
  • 09 – 11 Juli 2018
  • 16 – 18 Juli 2018
  • 23 – 25 Juli 2018
  • 30 Juli – 01 Agustus 2018
  • 06 – 08 Agustus 2018
  • 13 – 15 Agustus 2018
  • 20 – 21 Agustus 2018
  • 27 – 29 Agustus 2018
  • 03 – 05 September 2018
  • 12 – 14 September 2018
  • 17 – 19 September 2018
  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

 

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 06 – 07 Januari 2018
  • 13 – 14 Januari 2018
  • 20 – 21 Januari 2018
  • 27 – 28 Januari 2018
  • 03 – 04 Februari 2018
  • 10 – 11 Februari 2018
  • 17 – 18 Februari 2018
  • 24 – 25 Februari 2018
  • 03 – 04 Maret 2018
  • 10 – 11 Maret 2018
  • 17 – 18 Maret 2018
  • 24 – 25 Maret 2018
  • 31 Maret – 01 April 2018
  • 07 – 08 April 2018
  • 14 – 15 April 2018
  • 21- 22 April 2018
  • 28 – 29 April 2018
  • 05 – 06 Mei 2018
  • 12 – 13 Mei 2018
  • 19 – 20 Mei 2018
  • 26 – 27 Mei 2018
  • 02 – 03 Juni 2018
  • 09 – 10 Juni 2018
  • 30 Juni – 01 Juli 2018
  • 07 – 08 Juli 2018
  • 14 – 15 Juli 2018
  • 21 – 22 Juli 2018
  • 28 – 29 Juli 2018
  • 04 – 05 Agustus 2018
  • 11 – 12 Agustus 2018
  • 18 – 19 Agustus 2018
  • 25 – 26 Agustus 2018
  • 01 – 02 September 2018
  • 08 – 09 September 2018
  • 15 – 16 September 2018
  • 22 – 23 September 2018
  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018

 

 Investasi dan Fasilitas

  • Rp. 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.900.000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING DISTRIBUTED CONTROL SYSTEM

Ir. Paryana Puspaputra, M.Eng. and Team

Distributed Control System (DCS): Method & Analysis

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

SISTEM KONTROL: BASIC ENGINEERING DISTRIBUTED CONTROL SYSTEM (DCS)

ACARA

07 – 09 Agustus 2017 | Rp. 8.500.000 di Hotel Merapi Merbabu, Yogyakarta

 

ABSTRACK SISTEM KONTROL

Pelatihan ini memberikan pengetahuan dasar tentang sistem pengaturan terdistribusi (distributed control system) yang merupakan suatu pengetahuan dasar teknis yang banyak digunakan dalam suatu proses industri. Kursus ini memberikan gambaran dasar, definisi, teori dasar, perancangan, dan operasi dari suatu sistem kontrol terdistribusi. Penjelasan dalam kursus akan memberikan pengetahuan mengapa perlu distributed control system (DCS) dalam suatu proses produksi atau proses industri.

OUTLINE TRAINING SISTEM KONTROL

  1. Dasar Sistem Kontrol
  2. Dasar Prosess Kontrol
  3. Process Control Instrumentation And Component
  4. Process Control Using Minimum System
  5.  Distributed Controlled System Fundamental In Process Control
  6. Basic Design And Operation Distributed Control System

 

INSTRUCTOR SISTEM KONTROL

Ir. Teguh Santosa

 PARTICIPANT SISTEM KONTROL

Peserta training adalah semua sarjana teknik atau umum yang telah memiliki dasar pelaksanaan sistem pengaturan distribusi

DATE  AND VENUE SISTEM KONTROL

  • Hotel Merapi Merbabu Yogyakarta
  • 07 – 09 Agustus 2017
  • 08.00 – 16.00 WIB

 

TUTION FEE SISTEM KONTROL

Biaya Rp. 8.500.000 per peserta (Non Residential)
FACILITIES SISTEM KONTROL
Distributed Control System Training Modules, Training Kit, Certificate, Exclusive Souvenir, Dinner & City Tour, Coffee Break & Lunch

BASIC ENGINEERING DISTRIBUTED CONTROL SYSTEM (DCS)

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Distributed Control System (DCS)

Acara

08 – 09 Mei 2017  | Rp. 6.900.000 Per Peserta di Yogyakarta /Semarang / Solo
08 – 09 Mei 2017 | Rp. 7.900.000 Per Peserta di Bandung / Jakarta / Surabaya
08 – 09 Mei 2017 | Rp. 8.900.000 Per Peserta di Bali / Batam /Balikpapan / Manado / Lombok
15 – 16 Mei 2017  | Rp. 6.900.000 Per Peserta di Yogyakarta /Semarang / Solo

Jadwal Training 2017 Selanjutnya …

 



Tujuan Training Distributed Control System (DCS)

Peserta diharapkan dapat memperoleh pengetahuan yang menyeluruh mengenai cara perhitungan suhu, tekanan dan humidity serta tehnik pengendaliannya.

 

Materi Training Distributed Control System (DCS)

  1. SCADA system.
  2. Components, architectures, operation of Distributed Control System (DCS) and its hardware (field devices, remote terminal units)
  3. Controller structures.
  4. Sequential control and batch control.
  5. Control strategy and configuration.
  6. Alarms & trending, programmable logic controllers.
  7. Data communications and communications network.
  8. Device level communication protocol.
  9. Design of MMI.
  10. System security and implementation.

 

Peserta Training Distributed Control System (DCS)

  • D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  • Teknisi, Operator dan Supervisor didalam bidang  instrumentasi, disain, control dan automation technology, dll di berbagai macam industri.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.

Metode Training Distributed Control System (DCS)

Presentasi, diskusi, dan studi kasus

 

 

Jadwal Training 2017

Hotel Santika Kuta, Bali
Hotel Nagoya Plaza, Batam
Hotel Fave, Balikpapan
Hotel Aston, Manado
Hotel Lombok Raya, Mataram
Hotel Serela Merdeka, Bandung
Hotel Santika Pandegiling, Surabaya
Sofyan Hotel Betawi, Jakarta
Hotel Ibis Solo
Hotel Ibis Simpang Lima, Semarang
Hotel Ibis Malioboro, Yogyakarta

  • 02 – 03 Mei 2017
  • 08 – 09 Mei 2017
  • 15 – 16 Mei 2017
  • 22 – 23 Mei 2017
  • 29 – 30 Mei 2017
  • 05 – 06 Juni 2017
  • 12 – 13 Juni 2017
  • 19 – 20 Juni 2017
  • 03 – 04 Juli 2017
  • 10 – 11 Juli 2017
  • 17 – 18 Juli 2017
  • 24 – 25 Juli 2017
  • 31 Juli – 01 Agustus 2017
  • 07 – 08 Agustus 2017
  • 14 – 15 Agustus 2017
  • 21 – 22 Agustus 2017
  • 28 – 29 Agustus 2017
  • 04 – 05 September 2017
  • 11 – 12 September 2017
  • 18 – 19 September 2017
  • 25 – 26 September 2017
  • 02 – 03 Oktober 2017
  • 09 – 10 Oktober 2017
  • 16 – 17 Oktober 2017
  • 23 – 24 Oktober 2017
  • 30 – 31  Oktober 2017
  • 06 – 07 November 2017
  • 13 – 14 November 2017
  • 20 – 21 November 2017
  • 27 – 28 November 2017
  • 04 – 05 Desember 2017
  • 11 – 12 Desember 2017
  • 18 – 19 Desember 2017
  • 27 – 28 desember 2017

 

 

Investasi dan Fasilitas

  • Rp 8.900.000 (Non Residential) untuk lokasi di Bali, Batam, Balikpapan, Manado atau Lombok
  • Rp 7.900.000 (Non Residential) untuk lokasi di Bandung, Jakarta atau Surabaya
  • Rp 6.900.000 (Non Residential) untuk Lokasi Solo, Semarang atau Yogyakarta
  • Quota minimum 2 peserta
  • Quota minimum 3 peserta ( Untuk Manado, Balikpapan dan Lombok Quota minimal 4 peserta)
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)


Instruktur Training Distributed Control System (DCS)

Tugino, ST.,MT dan Tim

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.

 

Distributed Control System (DCS)

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

DISTRIBUTED CONTROL SYSTEM (DCS) TRAINING

ACARA

02 – 06 Mei 2017 | 08.00 – 16.00 | Rp 7.500.000 di Bandung
24 – 28 Juli 2017 | 08.00 – 16.00 | Rp 7.500.000 di Bandung
21 – 25 Agustus 2017 | 08.00 – 16.00 | Rp 7.500.000 di Bandung
25 – 29 September 2017 | 08.00 – 16.00 | Rp 7.500.000 di Bandung

Jadwal Training 2017 Selanjutnya …

 

 

Pendahuluan Pelatihan Distributed Control System

Pelatihan ini memberikan pengetahuan tentang sistem pengaturan terdistribusi (distributed control system) yang merupakan suatu pengetahuan teknis yang banyak digunakan dalam suatu proses industri. Kursus ini memberikan gambaran dasar, definisi, teori dasar, perancangan, dan operasi dari suatu sistem  kontrol terdistribusi. Penjelasan dalam pelatihan akan memberikan pengetahuan mengapa perlu DCS dalam suatu proses produksi atau proses industri. Bagaimana dasar perencanaan suatu sistem kontrol terdistribusi, bagaimana kinerja antar unit dalam suatu DCS dan bagaimana mengevaluasi suatu rancangan DCS.

Tujuan  Pelatihan Distributed Control System

  • Menjelaskan dasar sistem kontrol yang mendasari timbulnya DCS
  • Menjelaskan dasar process control dan instrumentasinya
  • Menjelaskan secara perlunya rancangan suatu process control
  • Menjelaskan dasar perencanaan suatu proses control
  • Menjelaskan dasar suatu sistem minimum dalam suatu proses kontrol
  • Memberikan gambaran kinerja antar unit dalam suatu DCS
  • Menjelaskan suatu proses kontrol berbasis mikrokontroller dan mikroprosessor
  • Memberikan gambaran komunikasi data antar unit dalam suatu DCS
  • Memberikan latihan perencanaan, operasi dan evaluasi kinerja DCS

Materi  Pelatihan Distributed Control System (DCS)

  • Dasar sistem kontrol
  • Dasar Process Kontrol
  • Process Control Intrumentation and Component
  • Process Control Using Minimum System
  • Mikro kontroller and Mikro processor application in process control system
  • Data communication in process control system
  • Distributed controlled system fundamental in process control
  • Design, operation and evaluation of distributed control system

Peserta Pelatihan Distributed Control System

Para Operator, Teknisi, Engineer, Perancang, Penyelia, Manager

Instruktur Pelatihan Distributed Control System

Ir. Yusuf Sofyan, MT

 

Jadwal Pelatihan

  • 02 – 06 Mei 2017
  • 24 – 28 Juli 2017
  • 21 – 25 Agustus 2017
  • 25 – 29 September 2017
  • 23 – 27 Oktober 2017
  • 20 – 24 November 2017
  • 04 – 08 Desember 2017

Jam                    : 08.00 – 16.00

Tempat             : Hotel Golden Flower, Jl. Asia Arika 15 – 17 Bandung (Tentative)

Biaya Pelatihan Distributed Control System

  • Rp 7.500.000,- (Tujuh Juta Rupiah)
  • Biaya tersebut sudah termasuk Fee Instruktur, Handout, Training kit, 2X Coffee Break, Lunch dan Sertifikat.

DISTRIBUTED CONTROL SYSTEM ( DCS ) TRAINING

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Distributed Control System (DCS)

Acara

15 – 16 April 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
17 – 19 April 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
22 – 23 April 2017 (Weekend) | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
25 – 27 April 2017 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2017 Selanjutnya …

 

 

Tujuan

Peserta diharapkan dapat memperoleh pengetahuan yang menyeluruh mengenai cara perhitungan suhu, tekanan dan humidity serta tehnik pengendaliannya.

 

Materi Training DCS

  1. SCADA system.
  2. Components, architectures, operation of DCS and its hardware (field devices, remote terminal units)
  3. Controller structures.
  4. Sequential control and batch control.
  5. Control strategy and configuration.
  6. Alarms & trending, programmable logic controllers.
  7. Data communications and communications network.
  8. Device level communication protocol.
  9. Design of MMI.
  10. System security and implementation.

 

Peserta

  • D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  • Teknisi, Operator dan Supervisor didalam bidang non instrumentasi, seperti bagian proses, mekanis, operator, perawatan, dll di berbagai macam industri.
  • Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.

Metode   
Presentasi, diskusi, dan studi kasus

Metode

Presentasi, Diskusi , Brainstorming, Case Study,Evaluasi

 

Jadwal Training 2017

Hotel Ibis Malioboro ,Yogjakarta

  • 17 – 19 April 2017
  • 25 – 27 April 2017
  • 02 – 04 Mei 2017
  • 08 – 10 Mei 2017
  • 15 – 17 Mei 2017
  • 22 – 24 Mei 2017
  • 29 – 31 Mei 2017
  • 05 – 07 Juni 2017
  • 12 – 14 Juni 2017
  • 19 – 21 Juni 2017
  • 03 – 05 Juli 2017
  • 10 – 12 Juli 2017
  • 17 – 19 Juli 2017
  • 24 – 26 Juli 2017
  • 31 Juli – 01 Agustus 2017
  • 07 – 09 Agustus 2017
  • 14 – 16 Agustus 2017
  • 21 – 23 Agustus 2017
  • 28 – 30 Agustus 2017
  • 04 – 06 September 2017
  • 11 – 13 September 2017
  • 18 – 20 September 2017
  • 25 – 27 September 2017
  • 02 – 04 Oktober 2017
  • 09 – 11 Oktober 2017
  • 16 – 18 Oktober 2017
  • 23 – 25 Oktober 2017
  • 30 Oktober – 01 November 2017
  • 06 – 08 November 2017
  • 13 – 15 November 2017
  • 20 – 22 November 2017
  • 27 – 29 November 2017
  • 04 – 06 Desember 2017
  • 11 – 13 Desember 2017
  • 18 – 20 Desember 2017
  • 27 – 29 desember 2017

Jadwal Weekend

Hotel Ibis Malioboro ,Yogjakarta

  • 15 – 16 April 2017
  • 22 – 23 April 2017
  • 29 – 30 April 2017
  • 06 – 07 Mei 2017
  • 13  – 14 Mei 2017
  • 20 – 21 Mei 2017
  • 27 – 28 Mei 2017
  • 03 – 04 Juni 2017
  • 10 – 11 Juni 2017
  • 17 – 18 Juni 2017
  • 01 – 02 Juli 2017
  • 08 – 09 Juli 2017
  • 15 – 16 Juli 2017
  • 22 – 23 Juli 2017
  • 29 – 30 Juli 2017
  • 05 – 06 Agustus 2017
  • 12 – 13 Agustus 2017
  • 19 – 20 Agustus 2017
  • 26 –27 Agustus 2017
  • 02 – 03 September 2017
  • 09 – 10 September 2017
  • 16 – 17 September 2017
  • 23 – 24 September 2017
  • 30 September – 01 Oktober 2017
  • 07 – 08 Oktober 2017
  • 14 – 15 Oktober 2017
  • 21 – 22 Oktober 2017
  • 28 – 29 Oktober 2017
  • 04 – 05 November 2017
  • 11 – 12 November 2017
  • 18 – 19 November 2017
  • 25 – 26 November 2017
  • 02 – 03 Desember 2017
  • 09 – 10 Desember 2017
  • 16 – 17 Desember 2017
  • 23 – 24 Desember 2017
  • 30 – 31 Desember 2017



Investasi dan Fasilitas

  • Rp 6.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas: Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

Instruktur

Tugino, ST.,MT dan Tim

Memiliki pengalaman luas sebagai praktisi dan  trainer di bidang  Electricity Maintenance.

Distributed Control System (DCS)

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

DISTRIBUTED CONTROL SYSTEM (DCS)

Event

06 – 10 Februari 2017 | Rp 9.500.000/person at Bandung
27 Februari – 03 Maret 2017 | Rp 9.500.000/person at Bandung
17 – 21 April 2017 | Rp 9.500.000/person at Bandung
08 – 12 Mei 2017 | Rp 9.500.000/person at Bandung

Jadwal Training 2017 Selanjutnya …

 




TRAINING OBJECTIVE

After completing this course, participants will be able to understand the principles of maintenance and troubleshooting of DCS hardware and software, diagnose DCS component status, and also manage and respond to process interface including Operation and Monitoring. Tobe able to program, to develop monitoring interface system. Engineering programming including Function Block and Human Machine Interface ,   access operator interface display, to manipulate various control modules, operate system trending, manage and respond to process alarm/event, monitor process performance, view real-time and historical trend data, diagnose DCS component status, etc .



DCS TRAINING MATERIAL OUTLINE

  1. DCS Introduction
  2. DCS Hardware Component and architecture
  3. Hardware Installations and Design
  4. Hardware Commissioning
  5. Software Feature Exploring
  6. Hardware General Problem and Troubleshooting
  7. DCS Diagnostic
  8. Function Block Programming and I/O Addressing system and wiring
  9. DCS Programming
  10. PID Regulatory Control Programming
  11. PID Tuning
  12. Human Machine Interface(HMI System)
  13. Alarm Management system
  14. Process and Event Historical
  15. DCS Security



TRAINING INSTRUCTOR

Ir.Endra Joelianto, Ph.D. is an expert in control engineering and industrial automation. His outstanding research is: Hybrid Control Systems, Discrete Event Control Systems, Petri Nets Analysis and Application on PLC, Robust and Advanced PID Controller and its implementation on PLC, DCS, Fieldbus, Industrial automation and Advanced Control System Designs. He received first degree (Ir.) in Engineering Physics in 1990 from Department of Engineering Physics, ITB and Doctor of Philosofy (PhD.) in Control Engineering in 2001 from Department of Engineering, The Australian National University, Canberra, Australia. He is Head of Intelligent Control and Automation Laboratory and Coordinator of PLC Research Group for research and training, Engineering Physics Study Program and Instrumentation and Control Research Division, Institut Teknologi Bandung. He was Director of Schneider-OMRON PLC Training Center, Maranatha Christian University, Bandung. He has attended several professional training on PLC, DCS and Instruments Callibration, such as: Yokogawa DCS, Bandung (2000), Implementation of Indonesian National Standard (SNI) 19-17025 and Basic Calibration, Yokogawa Electric Corporation, Bandung (2001), Fieldbus Foundation Technology, Singapore (2002), Basic and Advanced PLC Telemecanique-TWIDO, Bandung (2003), Basic and Advanced PLC OMRON, Jakarta (2004), Cleaner Production Application in Industries (Bandung 2005), Effective Energy Systems for Sustainable Development (Thailand 2006), Programming and Networking PLC Mitsubishi (2006), InTouch Wonderware, Wonderware Historian and Information Server (Bandung, 2012). He also has hosted Workshop on Industrial Automation (Bandung, 2002) and (Bandung, 2003), Workshop on Application of PLC in Industrial Automation (Bandung, 2003), National Workshop on Instrumentation & Control (2011) and many professional trainings on PLC, DCS, SCADA, Human Machine Interface and Industrial Process Control and Automation in Bandung. He was the project leader of Department of National Education TPSDP Retooling Program Batch II on Industrial Automation using PLC (2004). He is the chairman of National Student Competition on PLC Programming held regularly since 2007 in ITB. He serves as instructor either for public or for in-house training on instrumentation and process control to universities, industries, petrochemical or oil and gas companies, such as: PT. NGL Arun, PT. NGL Bontang, PT. Pupuk Iskandar Muda, PT. Pupuk Kalimantan Timur, PT. Pupuk Kujang, PT. Semen Padang, PT. Semen Gresik, PT. Semen Cibinong, PT. Indocement, PT. Semen Tigaroda Perkasa, PT. Exspan Nusantara, PERTAMINA, British Petroleoum, Maxus, Gulf, PT. Chevron Geothermal, PT. Chevron Pacific Indonesia, PetroChina, ConoccoPhilip, PT. Nusa Halmahera Minerals, Unocal, PJB, Immanuel Hospital, LIPI-Bandung, LAPI-ITB, PT. Indonesia Power, Total Indonesie, Star Energy, CNOOC Ses, Premier Oil, Pearl Oil, MEDCO, etc. He has delivered more than 150 professional training programs on Instrumentation and Control. He also serves as instrumentation and control design and consultant, PT. INALUM, PT. Badak NGL, Ministry of Energy and Mineral Resources – Indonesia.

 

VENUE

Kagum Group Hotel Bandung (Golden Flower, Banana Inn, Serela, Gino Feruci), Amaroossa Hotel, Noor Hotel, Grand Setiabudi Hotel, dll


TRAINING DURATION

5 days

  JADWAL TRAINING

  1. 06 Feb 2017-10 Feb 2017
  2. 27 Feb 2017-03 Mar 2017
  3. 17 Apr 2017-21 Apr 2017
  4. 08 May 2017-12 May 2017
  5. 05 Jun 2017-09 Jun 2017
  6. 10 Jul 2017-14 Jul 2017
  7. 07 Aug 2017-11 Aug 2017
  8. 11 Sep 2017-15 Sep 2017
  9. 09 Oct 2017-13 Oct 2017
  10. 30 Oct 2017-03 Nov 2017
  11. 18 Dec 2017-22 Dec 2017

INVESTATION PRICE/PERSON

  1. Rp 9.500.000/person (full fare) or
  2. Rp 9.250.000/person (early bird, payment 1 week before training) or
  3. Rp 8.950.000/person (if there are 3 or more participants from the same company)



 


FACILITIES FOR PARTICIPANTS

  1. Training Module
  2. Training CD contains training material
  3. For practice session : All softwares related to this training is supplied and installed to participants’ laptop/notebook by provider team / instructor
  4. Certificate
  5. Stationeries: NoteBook and Ballpoint
  6. Jacket or waistcoat or T-Shirt
  7. Bag or backpackers
  8. Training Photo
  9. Training room with full AC facilities and multimedia
  10. Once lunch and twice coffeebreak every day of training DCS
  11. Qualified  instructor
  12. Transportation for participants from hotel of participants to/from hotel of training (if minimal number of participants from one company is 4 persons)

 

DISTRIBUTED CONTROL SYSTEM (DCS):  PRINCIPLES, MAINTENANCE, OPERATION, PROGRAMMING AND TROUBLESHOOTING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

DCS: DISTRIBUTED CONTROL SYSTEM TRAINING

ACARA

07 – 12 November 2016 | Rp 7.500.000 di Bandung
05 – 09 Desember 2016 | Rp 7.500.000 di Bandung

 

 

PENDAHULUAN

Pelatihan ini memberikan pengetahuan tentang sistem pengaturan terdistribusi (distributed control system ) yang merupakan suatu pengetahuan teknis yang banyak digunakan dalam suatu proses industri. Kursus ini memberikan gambaran dasar, definisi, teori dasar, perancangan, dan operasi dari suatu sistem  kontrol terdistribusi. Penjelasan dalam pelatihan akan memberikan pengetahuan mengapa perlu DCS dalam suatu proses produksi atau proses industri. Bagaimana dasar perencanaan suatu sistem kontrol terdistribusi, bagaimana kinerja antar unit dalam suatu DCS dan bagaimana mengevaluasi suatu rancangan DCS.

 

TUJUAN PELATIHAN

  • Menjelaskan dasar sistem kontrol yang mendasari timbulnya DCS
  • Menjelaskan dasar process control dan instrumentasinya
  • Menjelaskan secara perlunya rancangan suatu process control
  • Menjelaskan dasar perencanaan suatu proses control
  • Menjelaskan dasar suatu sistem minimum dalam suatu proses kontrol
  • Memberikan gambaran kinerja antar unit dalam suatu DCS
  • Menjelaskan suatu proses kontrol berbasis mikrokontroller dan mikroprosessor
  • Memberikan gambaran komunikasi data antar unit dalam suatu DCS
  • Memberikan latihan perencanaan, operasi dan evaluasi kinerja DCS

MATERI  PELATIHAN DCS : DISTRIBUTED CONTROL SYSTEM TRAINING

SCOPE PESERTA

Para Operator, Teknisi, Engineer, Perancang, Penyelia, Manager.

 

 

Date & Venue :

Date             :

  • 07 – 12 November 2016
  • 05 – 09 Desember 2016

Time      : 08.00 – 16.00

Venue  :

  • Hotel Golden Flower, Jl. Asia Afrika 15 – 17 Bandung
  • Hotel Gino Ferucci, Jl. Braga No. 67 Bandung
  • Hotel Carrcadin, Jl. Kebon Jati No. 71-75 Bandung

 

BIAYA PELATIHAN PUBLIC

  • Rp 7.500.000,-(Tujuh Juta Lima Ratus Ribu Rupiah).
  • Biaya tersebut sudah termasuk
    • Fee Instruktur,
    • Penggandaan Materi,
    • Training Kit,
    • 2X Coffee Break,
    • Lunch,
    • dan Sertifikat.
  • Tidak termasuk pajak-pajak.

 

DCS : DISTRIBUTED CONTROL SYSTEM  TRAINING

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

DCS: PRINCIPLES AND APPLICATION

ACARA

17 – 20 Oktober 2016 | Rp 8.500.000/person di Yogyakarta
22 – 25 November 2016 | Rp 8.500.000/person di Yogyakarta
27 – 30 Desember 2016 | Rp 8.500.000/person di Yogyakarta

 

 

TUJUAN TRAINING DCS

Peserta diharapkan dapat memperoleh pengetahuan yang menyeluruh mengenai konsep dan aplikasi dari distributed control system (DCS) dalam aplikasinya secara real di lapangan.

 

CAKUPAN MATERI TRAINING DCS

  1. Introduction to distributed computing, overview of SCADA system.
  2. Components, architectures, operation of distributed control system (DCS) and its hardware (field devices, remote terminal units)
  3. Controller structures.
  4. Sequential control and batch control.
  5. Control strategy and configuration.
  6. Alarms & trending, programmable logic controllers.
  7. Data communications and communications network.
  8. Device level communication protocol.
  9. Design of MMI.
  10. System security and implementation.
  11. Practice and interactive discussion

 

SIAPA SEBAIKNYA MENGIKUTI TRAINING DCS INI?:

  1. D3 atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
  2. Teknisi, Operator dan Supervisor didalam bidang  instrumentasi, disain, control dan automation technology, dll di berbagai macam industri.
  3. Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
  4. Seluruh pihak yang ingin memahami topik ini



INSTRUCTOR TRAINING DCS

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.


VENUE DCS

Yogyakarta (Ibis Styles Hotel/ Ibis Malioboro Hotel/ Jambuluwuk Hotel/ Cavinton Hotel/ Grand Zuri Hotel, dll)

 

TRAINING DURATION DCS

4 days

 

TRAINING TIME DCS

  1. 17 Oct 2016-20 Oct 2016
  2. 22 Nov 2016-25 Nov 2016
  3. 27 Dec 2016-30 Dec 2016

 

 

INVESTMENT PRICE/PERSON :

  1. Rp. 8.500.000/person (full fare) or
  2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
  3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

 

FACILITIES FOR PARTICIPANTS :

  1. Modul Training
  2. Flashdisk Training berisi materi training distributed control system (DCS)
  3. Sertifikat
  4. ATK: NoteBook dan Ballpoint
  5. T-Shirt
  6. Ransel
  7. Foto Training
  8. Ruang Training dengan fasilitas Full AC dan multimedia
  9. Makan siang dan 2 kali coffeebreak
  10.  Instruktur yang Qualified
  11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

DISTRIBUTED CONTROL SYSTEM (DCS): PRINCIPLES AND APPLICATION

 

 

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days