Troubleshooting and Operability Problem for Centrifugal Compressors

EVENT

24 – 26 September 2018 | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta
29 – 30 September 2018 (Weekend) | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta
01 – 03 Oktober 2018 | Rp 6.900.000,- per peserta  di Hotel Ibis, Yogyakarta

Jadwal Training 2018 Selanjutnya …

02 – 04 Januari 2019 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta
07 – 09 Januari 2019 | Rp 6.900.000,- per peserta di Hotel Ibis, Yogyakarta

Jadwal Training 2019 Selanjutnya …

 

 

DESKRIPSI TRAINING CENTRIFUGAL COMPRESSORS

This training programme covers a study of gas compression and expansion laws applied to industrial processes. this covers theory, practice and troubleshooting applications of compressors usually encountered in plants, and their related aspects.

The objective of the programme is to provide a practical and experienced based approach to the problems posed by compressors and turbines and the means to solve them. With the knowledge gained in this programme, the participants shall be able to analyze the operating parameters and strive to improve the performance of these rotating machines.

 

MATERI TRAINING CENTRIFUGAL COMPRESSORS

Theory of compression

  • Ideal gas equation and practical application
  • Isentropic, polytropic, isothermal compression
  • Calculations mass and volume capacity
  • Practical compression laws
  • Discharge temperature
  • Power for compression
  • Characteristic curves

Axial and centrifugal compressors

  • Parts of compressors
  • Seals / sealing for compressors
  • Characteristic curves: invariant representations
  • Surge and stonewall; range of working efficiency
  • Capacity control methods
  • Start-up, vibration survey

Technology

  • Casings, diaphragms, stator, blades
  • Rotor, journal and thrust bearings, internal and shaft seals, coupling
  • Balance and critical speeds
  • Lubrication and seal systems
  • Typical mechanical incidents
  • Case studies

 

PESERTA TRAINING CENTRIFUGAL COMPRESSORS

Participants for the programme are those involved in operation,maintenance, process design, project and inspection engineers who are involved in compressors and steam turbine units.

 

METODE TRAINING CENTRIFUGAL COMPRESSORS

Presentasi, Diskusi , Studi Kasus

 

Jadwal Training 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 24 – 26 September 2018
  • 01 – 03 Oktober 2018
  • 08 – 10 Oktober 2018
  • 15 – 17 Oktober 2018
  • 22 – 24 Oktober 2018
  • 29 – 31 Oktober 2018
  • 05 – 07 November 2018
  • 12 – 14 November 2018
  • 21 – 23 November 2018
  • 26 – 28 November 2018
  • 03 – 05 Desember 2018
  • 10 – 12 Desember 2018
  • 17 – 19 Desember 2018
  • 26 – 28 Desember 2018

Jadwal Training Weekend 2018

Hotel Ibis Malioboro ,Yogjakarta

  • 29 – 30 September 2018
  • 06 – 07 Oktober 2018
  • 13 – 14 Oktober 2018
  • 20 – 21 Oktober 2018
  • 27 – 28 Oktober 2018
  • 03 – 04 November 2018
  • 10 – 11 November 2018
  • 17 – 18 November 2018
  • 24 – 25 November 2018
  • 01 – 02 Desember 2018
  • 08 – 09 Desember 2018
  • 15 – 16 Desember 2018
  • 22 – 23 Desember 2018
  • 29 – 30 Desember 2018

 

Jadwal Training 2019

Hotel Ibis Malioboro, Yogykarta

  • 2 – 4 Januari 2019
  • 7 – 9 Januari 2019
  • 14 – 16 Januari 2019
  • 21 – 23 Januari 2019
  • 28 – 30 Januari 2019
  • 6 – 8 Februari 2019
  • 11 – 13 Februari 2019
  • 18 – 20 Februari 2019
  • 25 – 27 Februari 2019
  • 4 – 6 Maret 2019
  • 11 – 13 Maret 2019
  • 18 – 20 Maret 2019
  • 25 – 27 Maret 2019
  • 1 – 2 April 2019
  • 8 – 10 April 2019
  • 15 – 17 April 2019
  • 22- 24 April 2019
  • 29 – 30 Mei 2019
  • 6 – 8 Mei 2019
  • 13 – 15 Mei 2019
  • 20 – 22 Mei 2019
  • 27 – 29 Mei 2019
  • 10 – 12 Juni 2019
  • 17 – 19 Juni 2019
  • 24 – 26 Juni 2019
  • 1 – 3 Juli 2019
  • 8 – 10 Juli 2019
  • 15 – 17 Juli 2019
  • 22 -24 Juli 2019
  • 29 – 31 Juli 2019
  • 5 – 7 Agustus 2019
  • 13-15 Agustus 2019
  • 19 – 21 Agustus 2019
  • 26 -28 Agustus 2019
  • 02 – 04 September 2019
  • 09-11 September 2019
  • 16 – 18 September 2019
  • 23 – 25 September 2019
  • 30 September – 02 Oktober 2019
  • 07 – 09 Oktober 2019
  • 14 – 16 Oktober 2019
  • 21 – 23 Oktober 2019
  • 28 – 30 Oktober 2019
  • 04 – 06 November 2019
  • 11 – 13 November 2019
  • 18 – 20 November 2019
  • 25 – 27 November 2019
  • 02 -04 Desember 2019
  • 9 – 11 Desember 2019
  • 16 – 18 Desember 2019
  • 23 – 24 Desember 2019
  • 30 – 31 Desember 2019

 

INVESTASI & FASILITAS TRAINING CENTRIFUGAL COMPRESSORS

  • 6.900.000 (Non Residential, Belum Termasuk Pajak PPn 10%)
  • VIP training Rp 8.9000 (4 Hari , Non Residential dengan tambahan Fasilitas Paket studi lapangan/ City tour dan Belum Termasuk Pajak PPn 10%)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel khusus bagi perusahaan yang mengirimkan minimal 3 orang peserta)

 

INSTRUKTUR TRAINING CENTRIFUGAL COMPRESSORS

Ir. Paryana Puspaputra, M.Eng. and Team

 

Troubleshooting and Operability Problem for Centrifugal Compressors

Formulir Pra-Pendaftaran Public Training / Permintaan Informasi Lebih Lanjut
  1. JENIS INFORMASI/TRAINING
  2. (required)
  3. (required)
  4. DATA PRIBADI
  5. (required)
  6. (required)
  7. (required)
  8. (valid email required)
  9. (required)
  10. (required)
  11. DATA PRE REGISTRATION (Tidak Mengikat)
  12. (required)
  13. PESAN UNTUK PENYELENGGARA TRAINING
 

cforms contact form by delicious:days

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.